Skip to content
Hood
-
Zeiss Lens Hood 40.5mm for Contax
*Shipping to Japan Only.A lens hood for Contax cameras, manufactured by Zeiss Ikon Stuttgart. Product code: 1104. 40.5mm screw-in. Both the hood and the base are made of bakelite and are molded as a single piece.This product dates back to the era of the Contax IIa and IIIa models and is compatible with the 50mm Sonnar and Tessar lenses.Around the same time, Zeiss Ikon East Germany also released...
-
Condition：
-
92% B
-
Hektor 28mm f6.3 Lens Hood SOOHN New York
SOOHN Hood for the Hektor 28mm Lens, made by Leitz New York. The retaining screw is chrome, and the construction differs slightly from the original Wetzlar-made version. While the interior of the hood is matte-coated, it lacks the fine ribbed texture of the German version, instead featuring a somewhat rounded finish that gives it a heavier, more handcrafted feel.Leitz New York versions of the S...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Early
Early model of the FISON hood for the Leica A-type, specifically the rectangular type. It likely dates from the era of lenses such as the Leica Anastigmat, Elmax, and the early Elmar 50mm f3.5. The hood has a 36mm slip-on fitting and is molded as a single piece without any logos or engravings from Leica.The hood's base features a step, which indicates it is a later version of the rectangular-ty...
-
Condition：
-
90% C
-
Leotax Lens Hood for Simlar 50mm f3.5
*Shipping to Japan only. For overseas customer, please contact us before order.Leotax-branded. A lens hood for the Simlar 5cm f3.5. It is the type that is secured with a retaining screw. The size is A36. It is also compatible with lenses such as the Elmar.The chrome plating has a slightly shiny finish, and it is well-built.There are minor signs of wear from use, as well as some paint loss on th...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
Early model hood for the Elmar 35mm f3.5, with the engraving done in three steps and featuring inlaid silver. It is a screw-on style (A36) and is made of brass with a black paint finish. The hood is equipped with rare nickel-plated screws.Though designed for the Elmar 35mm, it has been tested and can also be used with other lenses like the Summaron 35mm, Elmar 50mm, and others. The hood is a st...
-
Condition：
-
91% B
-
Hasselblad Magnifying Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.The Hasselblad 42013 Magnifying Hood is a first-generation model, designed for use with Hasselblad cameras such as the 500C/M. This magnifying hood replaces the original folding finder hood, providing a magnified view to aid in precise focusing and composition.One of the key benefits of this accessory is that it also...
-
Condition：
-
94% A
-
Actina Lens Hood for Summicron 50mm
*Shipping to Japan Only.Lens Hood Made by Schmidt & Co. Under the Actina Brand for Leica Lenses.This lens hood was produced by Schmidt & Co., which was the Leica distributor in Japan. It is compatible with 50mm lenses like the E39-threaded Summicron and Elmar 50mm f2.8, as well as other lenses such as ITDOO and IROOA. It can also be inserted and attached in reverse. Perfect for those looking fo...
-
Condition：
-
92% B
-
Leitz Lens Hood FIKUS Nickel
This is a zoom hood for Leica 35mm, 50mm, 90mm, and 135mm lenses, known as FIKUS. It fits 36mm filter threads (A36) and is a rare nickel version. This particular item is engraved not only for the Hektor but also for the Elmar 3.5.When the outer hood is fully collapsed, it accommodates the Elmar 35mm and Hektor 50mm lenses. If you love using black-painted Barnack models like the DII or DIII alon...
-
Condition：
-
91% BC
-
Summaron 28mm f5.6 Lens Hood SOOBK
Hood for the Summaron 28mm f5.6 (Red Summaron). Leitz product code is SOOBK, later 12500Y. It is an A36 slip-on hood.This is a finely crafted hood with a crinkled baked finish. Although it is an expensive hood, when mounted on the Red Summaron, it presents a compact yet dignified appearance that fulfills the desire for ownership.For those who own a Red Summaron, this is a must-have item. Which ...
-
Condition：
-
96% Mint
-
Schmidt Lens Hood for Summarit 50mm f1.5
-
Condition：
-
94% A
-
Leitz Lens Hood FLQOO
Early Model FLQOO Hood for Elmar 35mm f3.5 This hood features a three-tier engraving with silver inlay. It is a clip-on type (A36). Made of brass with black paint, it has a chrome screw for fastening.While designed for the Elmar 35mm, it is also compatible with other lenses such as the Summaron 35mm and Elmar 50mm (fitment tested). This is a very stylish hood.Its simple design enhances the look...
-
Condition：
-
93% B
-
FB-10 真鍮素地 Hektor 50mm Lens Hood
*Ship to Japan ONLY.
-
Condition：
-
96% Mint
-
Summarit 50mm f1.5 Lens Hood XOONS
The XOONS hood for the Summarit 50mm f1.5 is in like-new condition. It has a brass construction with a black crystalline coating, showcasing excellent craftsmanship and a substantial feel that’s rare in modern industrial products.This hood is compatible not only with the Summarit but also with the Leitz Xenon 50mm. Although it may appear bulky for a 50mm hood, it surprisingly complements a smal...
-
Condition：
-
98% Like New
-
Schmidt Lens Hood for Summarit 50mm f1.5
*Shipping to Japan Only. For overseas customer, please contact us before order.An ACTINA lens hood made for the Summarit 50mm, produced by Schmidt & Co., the Leica import agency. While not a genuine Leitz product, it is well-made and has a quality that feels comparable to original parts. The hood attaches to the lens with a screw mechanism and allows for the attachment of an E41 filter while in...
-
Condition：
-
93% B
-
Elmar 50mm Lens Hood ITOOY
*Shipping to Japan Only.Lens hood for the Elmar 50mm f2.8 and f3.5 with an E39 filter size, late version of the ITOOY. Features a double hook, allowing it to be attached in reverse. A simple yet elegantly designed hood.The hood has a tiny paint loss at the tip and some light scuffing on the chrome-finished base, but overall it maintains a clean and attractive appearance. The matte black coating...
-
Condition：
-
93% B
-
Rolleiflex Lens Hood (RIII)
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the Rolleiflex 2.8F and other RIII bayonet mount lenses. Suitable for Planar and Xenotar 80mm lenses. Features an old logo stamp and a classic look. It is in near-new condition!The hood shows almost no signs of use and is in very clean condition. The black paint on the interior is also well-preserved. T...
-
Condition：
-
95% Mint
-
Nikkor 35mm f2.5 (S) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.The genuine hood for the W-Nikkor 35mm f2.5 lens, designed for the Nikon S series. It resembles the hood for the 35mm f1.8 lens but is about 2mm longer. This example bears the Mount Fuji logo (optical mark, onigiri mark) and corresponds to the later version of this hood.It features an aluminum body with black paint. ...
-
Condition：
-
96% Mint
-
Nikkor 35mm f2.5 (S) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.The genuine hood for the W-Nikkor 35mm f2.5 lens, designed for the Nikon S series. This one is the letter-only type without the Mount Fuji logo, featuring larger and bolder engraving. It represents one of the earlier versions. It features an aluminum body with black paint. While it shares a similar shape with the hoo...
-
Condition：
-
92% B
-
Hasselblad Lens Hood 150
*Shipping to Japan Only. Lens hood for the Hasselblad Sonnar C 150mm. Made of metal with a black paint finish. Although marked for the 150mm, it is compatible with the 100mm, 120mm, 150mm, and 250mm lenses. In later years, the marking was changed to 100 - 250. From 1974 onward, the hood was replaced with a plastic version.There is minor paint loss on the edges, but the texture of the paint reta...
-
Condition：
-
94% A
-
Hasselblad Lens Hood Shu0006
*Shipping to Japan Only.Camera & Watch Bar in Yurakucho, Okadaya, has planned and manufactured this lens hood for Hasselblad cameras. Made in Japan.This hood can be fitted to various lenses, including the Planar C 80mm f2.8 and others like the 100mm and 150mm. It faithfully reproduces the early Hasselblad metal hoods with the characteristic palm-patterned crêpe finish on aluminum, while enhanci...
-
Condition：
-
96% Mint
-
Janua Lens Hood
*Shipping to Japan Only.Genuine hood for the Leica-style camera Janua, made by San Giorgio in Italy. 36mm slip-on. Manufactured around 1949.Although the Janua has a dedicated bayonet mount and cannot be strictly called a Leica copy, it is a very unique and charming camera in both style and mechanism. In addition to the Essegi 50mm f3.5, lenses such as the Kritios 50mm f2 and f2.8 were developed...
-
Condition：
-
98% Like New
-
Hektor 28mm f6.3 Lens Hood SOOHN
Lens hood for Hektor 2.8cm f6.3 Leitz product code: SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on type.The sleek and simple trumpet-shaped design of this classic hood will enhance the look of your camera and lens. Beyond its practical benefits as a hood, it adds a striking and stylish appearance.By the way, while there is also a N.Y. Leitz version of the SOOHN hoo...
-
Condition：
-
93% B
-
Summicron 50mm f2 Lens Hood SOOFM
*Shipping to Japan Only.Leitz-made folding lens hood for the Summicron 50mm.This type of folding hood originated with the Xenon 50mm f1.5, and later was used for the Summitar and then became compatible with both Summitar and Summicron with the advent of the Summicron. It was exclusively used for the Summicron after the retirement of the Summitar. Knowing this history, one can truly appreciate i...
-
Condition：
-
91% C
-
Leitz Lens hood IROOA
*Shipping to Japan only. For overseas customer, please contact us before order.The classic Leica lens hood, IROOA. Double hook design. The later product code is 12571J. Suitable for E39 (39mm screw-in) lenses.Like other Leica hoods, the IROOA comes in various versions. This one is an early model with a shorter hood height and features engravings for six compatible lenses. It is one of the most ...
-
Condition：
-
95% Mint
-
Summicron 50mm f2 Lens Hood VTROO
*Shipping to Japan Only.A lens hood for the rigid Summicron (both early and late versions) for enlarging purposes, introduced in 1956. The Leitz product code is VTROO, later updated to 16686. Although not its original purpose, it can also be used as a hood with aperture control functionality, similar to the VALOO for the Elmar 50mm.(Installation Instructions)1. Insert the two protruding parts o...
-
Condition：
-
93% B
-
Leitz Lens Hood FIKUS Nickel
Leica Zoom Hood for 35/50/90/135mm, FIKUS. Rare nickel-plated finish. 36mm slip-on. This item features engravings for both Hektor and Summar.When the outer hood is fully retracted, it is compatible with the Elmar 35mm f3.5.The Ernst Leitz Wetzlar engraving is inlaid in silver. There is also a Germany engraving.The matte paint on the inside of the hood shows some signs of use, but otherwise, the...
-
Condition：
-
93% A
-
Leitz Lens Hood 12585H
Leitz 12585H lens hood. This is the genuine hood from the second generation of Summicron 35mm and 50mm lenses, fitting most E39 diameter lenses. It succeeded the IROOA hood.It's a classic hood that can be used with lenses like the Summicron 35mm f2, 50mm f2, and others, including Summaron and Elmar lenses. This specific hood is a later type marked for the 35/2 lens.*Shipping to Japan Only. For ...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
FLQOO. Hood for Elmar 35mm f3.5. A36. The retaining screw is chrome. The appearance is similar to the successor FOOKH, but the diameter and length are different. Its simple design enhances the look of your lens. As expected from Leitz.This item has an aluminum front end and features rare white paint markings instead of inlaid engravings. Similar models exist from N.Y. Leitz, but this one is mad...
-
Condition：
-
93% B
-
Summaron 28mm f5.6 Lens Hood SOOBK
12500Y. The old Leitz code is SOOBK. Lens hood for Summaron 28mm f5.6 (Red Summaron). A36 slip-on.A splendid hood with crinkle finish. Although it is quite an expensive hood, its appearance when mounted on the Red Summaron is compact yet imposing. For those who own or plan to purchase the Red Summaron, this is a must-have item. Which comes first, the lens or the hood? (LoL)There is some paint ...
-
Condition：
-
93% B
-
Nikkor 28mm f3.5 Lens Hood Chrome
A rare item, a hood for the Nikkor 28mm f3.5 with Nikon S mount. This is an early chrome-finished model. It is believed to have been supplied with the white barrel lens that appeared in 1952.Screw-in type. It has a two-piece structure, allowing a Series 7 filter to be sandwiched in between. The front part is matte chrome, and the rear part is gloss chrome.As is generally the case with Nikkor wi...
-
Condition：
-
97% Like New
-
Nikkor 28mm f3.5 Lens Hood Black
Rare item. Late model hood for the Nikkor 28mm f3.5 with Nikon S mount. Unlike the early chrome-finished model, this late model matches the black barrel of the later lenses with a two-tone finish of black paint and glossy chrome plating.Screw-in type. It has a two-piece structure, allowing a Series 7 filter to be sandwiched in between. The finish is exceptionally high-quality and beautiful.As w...
-
Condition：
-
94% A
-
Janua Lens Hood
*Shipping to Japan Only.Genuine hood for the Leica-style camera Janua, made by San Giorgio in Italy. 36mm slip-on. Manufactured around 1949.Although the Janua has a dedicated bayonet mount and cannot be strictly called a Leica copy, it is a very unique and charming camera in both style and mechanism. In addition to the Essegi 50mm f3.5, lenses such as the Kritios 50mm f2 and f2.8 were developed...
-
Condition：
-
93% B
-
Summarit 50mm f1.5 Lens Hood XOONS
Hood for Summilux 50mm f1.5, designated XOONS. It features an impressive construction with brass and black wrinkle paint, providing a substantial feel rarely seen in modern industrial products.This hood can be used not only with the Summilux but also with the Leitz Xenon 50mm lens.While it may appear somewhat grand for a 50mm lens hood, it surprisingly complements the Barnack Leica cameras well...
-
Condition：
-
95% Mint
-
Leitz Lens Hood IROOA
IROOA's early model. Slightly longer hood compared to later models. Later designated as 12571J. Designed for lenses with E39 diameter (39mm screw-in).Initially labeled for Summaron 3.5cm and Summicron 5cm, but also suitable for lenses like the Summicron 35mm f2 (8 elements) and Elmar 50mm f2.8.Compatible with various lenses, this simple and stylish design is a reassuring classic from Leica, the...
-
Condition：
-
95% Mint
-
Zeiss Lens Hood 40.5mm for Contax
Made by Zeiss Ikon Stuttgart, post-war. Catalog No. 1119. From the age of Contax IIa/IIIa. Screw-in hood for Sonnar 50mm etc. Used condition. No distortion. No dents.*Shipping to Japan Only.
-
Condition：
-
92% B
-
Hasselblad Lens Hood 150
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Hasselblad Zeiss Sonnar C 150mm. Made of metal with a black paint finish.It is marked as 150, but it is compatible with 100mm, 120mm, 150mm, and 250mm lenses. In later years, the marking was changed to 100-250. Note that from 1974 onwards, it was made of plastic.There is minor paint loss on the edges, b...
-
Condition：
-
93% B
-
Leitz Lens Hood SOOMP
SOOMP. Genuine hood for the Summar 50mm f2. 36mm slip-on type. The retaining screw (stopper) is chrome-plated. It cannot be used with the earliest Summar due to its rotating helicoid.The trapezoidal, widely opened front end provides a sense of security as a hood.There is some minor paint loss at the front edge of the hood. Other than that, there are only very light scuffs, with no dents or defo...
-
Condition：
-
93% B
-
Leitz Lens Hood IUFOO
Leitz telephoto lens hood, IUFOO, later known as code 12575N. Compatible with E39 diameter Elmar, Elmarit, Tele-Elmarit 90mm, and Hektor 135mm lenses, among others. Features a double hook. The hood part is finished in black paint, and the base of the hood is pearlescent chrome. The engravings are for three types of lenses: 4.5/135, 2.8/90, 4/90. There is no marking for the 4/135 (Elmar) found o...
-
Condition：
-
92% B
-
Leitz Lens Hood 12575N
Leitz's 12575N hood, formerly known as IUFOO, is a hood for Leica's telephoto lenses. It fits the Elmarit and Tele-Elmarit 90mm f2.8, the E39 Elmar 90mm and 135mm, and the Hektor 135mm. The hood itself is finished in black chrome, while the base is a satin chrome. As it features a double hook, the hood can be attached to the lens in reverse during transport. This product is a later model of the...
-
Condition：
-
92% B
-
Leitz Lens Hood FIKUS
Black/Chrome. A36 diameter zoom hood suitable for 50/90/135mm lenses. When fully retracted, it can also be used with the Elmar 35mm f3.5.
Shows no signs of use and is in very clean condition. It's hard to believe this item is nearly 70 years old, as it looks like new. The original box is also in great condition.
-
Condition：
-
97% Like New
-
Leitz Lens Hood FISON Black
Elmar 5cm lens hood, model FISON. It features a relatively early black paint finish and fits A36 size. This item is made with brass at both the base and tip, and the securing screws are chrome.
The degree of paint wear contributes well to its rugged appearance. This item is somewhat rare.
There are signs of paint wear in various places. The tip of the hood is very slightly distorted, but it is ...
-
Condition：
-
92% B
-
Leitz Lens Hood 12538
12538. Genuine lens hood for the Summicron 50mm f2. It can also be fitted to a 35mm lens. Made of plastic and manufactured in Canada.
This model succeeded the metal hood 12585. As hoods became integrated into the lens design after 1994, this is also the last standalone hood made for the Summicron.
It lacks the intricate craftsmanship of models like ITDOO or IROOA, but its lightweight nature is ...
-
Condition：
-
97% Mint
-
Nikkor 35mm f1.8 (S) Lens Hood
Nikon S-mount dedicated lens hood for Nikkor 35mm f/1.8. Made of metal. It has become increasingly rare recently. This one is the letter-only type without the Mount Fuji logo, featuring larger and bolder engraving. It represents one of the earlier versions.Please note that even for the same W-Nikkor 35mm f/1.8, the diameter differs for Leica L-mount, so please be careful. The L-mount version co...
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
The classic lens hood for Leica, the IROOA, commonly known as the Iroa. Double-hook design. The later product code is 12571J. Compatible with lenses with an E39 diameter (39mm screw-in).
While there are various variations of the IROOA, this item is a type that has six compatible lenses engraved. This version with IROOA engraving is likely the final model.
Robust construction with a simple and s...
-
Condition：
-
95% Mint
-
Rolleiflex Standard Lens Hood
Genuine lens hood for the Rollei Standard. While there are screw-on type hoods, this product is a slightly rarer hood that is fixed with a lever to the protrusion between the upper and lower lenses.
*Shipping to Japan Only. For overseas customer, please contact us before order.
This is an item that appears unused, in like-new condition. Even the included case is in pristine condition.
It's hard...
-
Condition：
-
96% Mint
-
Leica Lens Hood 12504
12504. Lens hood for Summilux 35mm and Summicron 35mm. Leica Camera engrave. Serie 7 filter can be inserted.
*Shipping to Japan only. For overseas customer, please contact us before order.
A small dent and faint paint peels on the front part, yet no affect to use. The other parts are clean and in good shape.
-
Condition：
-
92% B
-
Actina Lens Hood for Summicron 50mm
Produced by Shmidt. Lens hood for E39 lenses such as Summicron 50mm f2 and Elmar 50mm f2.8 etc.
Used condition. Fitting tested on lens. Good for use.
*Shipping to Japan only. For overseas cutomer, please contact us before order.
-
Condition：
-
91% C
-
Walz Lens Hood for Summarit 50mm
Screw-in hood for Summarit. Manufactured by Walz. Very compact and light. Good to use. Comes with UV filter.
*Shipping to Japan only. For overseas customer, please contact us before order.
Used condition. Slight distortion. Fitting tested on Summarit. Comes with UV filter.
-
Condition：
-
90% C
-
Leitz Lens Hood ITDOO
Early type of ITDOO. For Summicron 35mm f2 and 50mm f2. Single hook. Black part of hood made of plastic. Names of useable lenses are engraved on base part plated in chrome. Rare item. Good for collection as well.
Signs of use on outer part and front edge. No crack. Fitting tested on E39 lens.
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
Leitz IROOA hood. Early type. Slightly longer hood than late model. Later code is 12571J. For E39 lenses.
Summaron 3.5cm and Summicron 5cm engrave. Usable with Summicron 35mm 8 elements and Elmar 50m f2.8 as well.
The very standard lens hood of Leitz. Simple and stylish design.
Used condition. Paint peels on front edge. Small dent. Fitting tested on lens. Good for use.
*Shipping to Japan only. ...
-
Condition：
-
93% B
-
Nikkor 35mm f1.8 (L) Lens Hood
Hood for W-Nikkor 35mm f1.8 LTM. Made of plastic. It is not usable with Nikon S mount Nikkor 35mm f1.8 as the fiter size is different.
L mount lens is pretty rare already, yet the hood is much more difficult to find.Very rare item.
No signs of use. Very clean condition. Fitting tested on lens.
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON
For Elmar 50mm. Black Paint on Brass. Early type of FISON without screw around Leica IA era. Leitz Weztlar engrave. Rare item.
Very good condition. Faint paint peels. No distortion. Fitting tested on lens.
Almost 100 years has passed since production. Aantique item. Good for Leica I with Elmar early, Elmax, Anastigmat, and DII, DIII. Good atmosphere.
-
Condition：
-
93% AB
-
Summilux-R 50mm f1.4 Lens Hood 12508
Lens hood for Summilux-R 50mm f1.4 early. 12508.
Comes with manual, hood cap, and box. Like new.
No signs of use. Beautiful condition. No marks on mount.
-
Condition：
-
98% Like New
-
Nikkor 35mm f2.5 (S) Lens Hood
Hood for W-Nikkor 35mm f2.5 Comes with box. Rare item.
Very faint signs of use. Like new condition. Good for collection as well.
-
Condition：
-
95% Mint
-
Leitz Lens Hood XOONS for Summarit 50mm
XOONS hood for Summarit 50mm f1.5 Wrinkle paint.
Usable with Leitz Xenon 50mm. *Shipping to Japan only. For overseas customer, please contact us before order.
Beautiful condition with faint signs of use. Slight paint deterioration in inner part yet no effect on pictures. Comes with used box. Fitting tested on lens. Good for collection as well.
-
Condition：
-
94% A
-
Rolleiflex Lens Hood 4x4 Black
Lens hood for Rolleiflex baby after war model. For black body. Tiny scratch found close to Rollei's logo mark. Clean condition. Rare item.
-
Condition：
-
94% A
-
Leitz Lens Hood IUFOO
Leitz lens food for E39 size telephoto lens. IUFOO / 12575. For Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.
Single hook. Later vesion has double hooks. This is an early type with Elmar 9cm and Hetor 135cm engrave.
*Shipping to Japan only. For overseas customer, please contact us before order.
Used condition. Paint peels on front edge. A dent ...
-
Condition：
-
91% C
-
Hasselblad Lens Hood 80
Genuine Lens Hood for Hasselblad lenses, Planar 80mm etc. Plastic hood. Slight signs of use. Good conditioned. *Shipping to Japan Only.
-
Condition：
-
93% B
-
Leica Lens Hood 12586
For Summilux 50mm f1.4 Early and 2nd models, E43 Summilux. Successor hood of XOOIM. With LEICA engraving. A dent found on the side of the hood. Fitting on lens was checked. Good for use!
-
Condition：
-
91% C
-
Hasselblad Lens Hood Shu0012 for Distagon 50mm / 60mm
¥17,000
Hood for Distagon C 50mm and 60mm (Hasselblad). Screw-in type and able to set filter inside. Light and thin design but strong enough. New condition.
-
Condition：
-
100% Brand New
- Choosing a selection results in a full page refresh.
- Opens in a new window.
