Skip to content
Hood
-
Leitz Lens Hood 12571J
Leitz-made lens hood with double hooks. The old code is IROOA. A classic hood for lenses such as the 8-element Summicron 35mm f2 and the 50mm f2. Other than the code number, this is identical to the final version marked IROOA.A well-crafted and beautifully shaped hood.There are noticeable signs of wear throughout, including scuffing and shine on the plated areas, as well as paint loss on the co...
-
Condition：
-
90% C
-
Minolta Miniflex Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.Genuine lens hood for the Minolta Miniflex, a 4x4 format twin-lens reflex camera released in 1957.The color is somewhat similar to that of the Rolleiflex Grey Baby, but this hood features an even deeper shade.Unused item with original box. The box shows some signs of wear.Perfect for your collection!
-
Condition：
-
99% Like New
-
Nikkor 35mm f1.8 (S) Lens Hood
Dedicated metal lens hood for the Nikkor 35mm f/1.8 in Nikon S-mount. This example bears the Mount Fuji logo (optical mark, onigiri mark) and corresponds to the later version of this hood.A visually striking hood that enhances the classic look of this legendary lens. Clean examples like this have become increasingly hard to find in recent years.Please note that although the W-Nikkor 35mm f/1.8 ...
-
Condition：
-
94% A
-
Nikkor 35mm f1.8 (S) Lens Hood
Dedicated metal lens hood for the Nikkor 35mm f/1.8 in Nikon S-mount. This one is the letter-only type without the Mount Fuji logo, featuring larger and bolder engraving. It represents one of the earlier versions. It’s a visually striking hood with a distinctive presence.Please note that the Leica L-mount version of the W-Nikkor 35mm f/1.8 uses a different diameter and comes with a plastic rect...
-
Condition：
-
92% B
-
Fujinon 50mm f1.2 Lens Hood
Original Lens Hood for Fujinon 50mm f/1.2Compatible with Leica, Contax, and Nikon S mounts.This is a 60mm slip-on type hood, secured by tightening the side screw.Even harder to find than the lens itself — a truly rare accessory.There is a very slight scuff on the inner surface of the hood, but otherwise, it shows no signs of use and remains in excellent condition.Comes with a beautiful, high-qu...
-
Condition：
-
95% Mint
-
Leitz Lens Hood OLLUX
Dedicated Hood for the Legendary Summilux 35mm f/1.4 1st Version — a.k.a. Steel RimRenowned not only for its performance but also for the beautiful way it complements the lens when mounted.Leitz product code: OLLUX. The later version was assigned code 12522H. Among collectors and enthusiasts, it is affectionately referred to as OLLUX.This example is the earlier OLLUX-engraved version (later one...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
The earlier version was marked OLLUX — this piece is the Version 3, engraved with the later code 12522H.First unveiled at Photokina in 1960 as the world’s fastest wide-angle lens, the Summilux 35mm went through several design updates—such as changes to the filter mount—yet remained in production until the introduction of the ASPH version in the 1990s.This hood is specifically made for the earli...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FLQOO
Lens hood for Elmar 35mm f3.5, model FLQOO.Slip-on A36 type with a chrome locking screw.This particular piece features engraved lettering filled with white paint.While it shares a similar appearance with hoods like the FISON or other FLQOO models, it differs in diameter and length.A simple and elegant design that complements your lens beautifully—just as you'd expect from a Leica-made accessory...
-
Condition：
-
93% B
-
Nikkor 50mm f1.4 (L) Lens Hood
Leica screw mount and Nikon S mount-compatible lens hood for the Nikkor 50mm f1.4. It features a 43mm diameter, two-part screw-in design, model AN-43mm. The early version of the hood was made of aluminum, but this is the final version, made of brass with a black coating.A Series 7 filter can be inserted between the hood and the base of the hood.According to the included English manual, in addit...
-
Condition：
-
98% Like New
-
Leitz Lens Hood 12585
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 12585 lens hood. A genuine hood for the second generation Summicron 50mm and 35mm lenses. Finished in black chrome, it is the successor to the IROOA hood. This particular item is the later version with the 35/2 engraving.A classic hood that can be attached to most lenses with an E39 diameter, making it compatib...
-
Condition：
-
92% B
-
Schmidt Summarit 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.This lens hood was released under the Actina brand by Schmidt Shokai, the former official Leica distributor in Japan, specifically for the Summarit 50mm lens.It attaches to the lens via a locking screw, and being a slip-on type, it can be mounted with an E41 filter already in place.It weighs approximately 31g (measur...
-
Condition：
-
93% B
-
Actina Summitar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.This lens hood was released under the Actina brand by Schmidt Shokai, the former official Leica distributor in Japan, specifically for the Summitar 50mm f/2 lens.It is a slip-on type with a locking screw. Although not an official Leitz product, it is solidly built and has the refined presence of a genuine accessory. ...
-
Condition：
-
94% A
-
Actina Elmar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a lens hood for collapsible Elmar lenses with an A36 diameter, sold under the Actina name by Schmidt Shokai. Made in Japan.While it may appear to be a copy of the Leitz ITOOY hood, it is actually a unique accessory with a 36mm diameter.It mounts in the same way as the ITDOO or IROOA hoods, offering both ease ...
-
Condition：
-
93% B
-
Actina Elmar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.A lens hood for collapsible Elmar lenses with an A36 diameter, sold under the Actina name by Schmidt Shokai. Made in Japan.While it appears to be a copy of the Leitz ITOOY hood, it is actually a unique accessory with a 36mm diameter.It attaches in the same manner as the ITDOO or IROOA hoods, offering ease of use and ...
-
Condition：
-
93% B
-
Actina Summicron 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a lens hood from the Actina brand, produced by Schmidt Shokai, the former official Leica distributor in Japan, for Leica lenses.Compatible with 50mm lenses that accept ITDOO or IROOA hoods, such as E39-mount Summicron or Elmar 50mm f/2.8.The hood can also be mounted in reverse for storage.Slightly heavier tha...
-
Condition：
-
91% C
-
Wallace Heaton Hood for Elmar 50mm f3.5
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens Hood for Elmar 50mm f/3.5 by Wallace Heaton, LondonThis lens hood allows for aperture operation while mounted—compatible even with the engraved aperture scale of prewar Elmars.The aperture values are displayed in the continental system (3.5, 4.5, 6.3, 9, 12.5, 18). Made of aluminum, it is lightweight at approxim...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Elmar 50mm, FISON. A36 size. Chrome finish. Later renamed with the code 12510.The FISON hood came in various types depending on the era, making it a fascinating accessory for historical research.This particular piece features a design with less curvature at the front edge, giving it a sharper, more defi...
-
Condition：
-
95% Mint
-
Leitz Lens Hood VALOO
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz product code: VALOO, later changed to 16620.Introduced in 1949, this is an enlarging lens hood originally designed for use with the Elmar 50mm lens on enlargers such as the Valoy and Focomat, or on focusing stages. Its purpose was to improve the ease of aperture operation during enlarging work.In practice, it c...
-
Condition：
-
92% B
-
Leitz Lens Hood IUFOO
*Shipping to Japan Only.The Leitz E39 screw-mount lens hood, IUFOO/12575, is compatible with medium telephoto lenses such as the Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.This piece is a single-hook model, whereas later versions feature a double-hook design. It was produced for a long time with various shapes and engravings. This specific ex...
-
Condition：
-
94% A
-
Zeiss Lens Hood 40.5mm for Contax
*Shipping to Japan Only. For overseas customer, please conact us before order.Made in postwar West Germany by Zeiss Ikon Stuttgart. Catalog number: 1119. This is a 40.5mm screw-in hood.Compatible with lenses such as the Sonnar 50mm for Contax IIa / IIIa, and can also be mounted on many prewar Zeiss lenses. Fit has been confirmed on the appropriate lenses.There are some signs of wear and light s...
-
Condition：
-
92% B
-
Zeiss Lens Hood 49mm for Contax
*Shipping to Japan Only. For overseas customer, please contact us before order.Made in postwar West Germany by Zeiss Ikon Stuttgart. Catalog number: 1120. This is a 49mm screw-in hood, made of lightweight aluminum with a beautifully refined finish.Designed for the Sonnar 85mm f/2 used on Contax IIa / IIIa cameras. It also fits many prewar Sonnar lenses.Please note: it is not compatible with the...
-
Condition：
-
92% B
-
Summarit 50mm f1.5 Lens Hood XOONS
The XOONS hood for the Summarit 50mm f1.5 is in like-new condition. It has a brass construction with a black crystalline coating, showcasing excellent craftsmanship and a substantial feel that’s rare in modern industrial products.This hood is compatible not only with the Summarit but also with the Leitz Xenon 50mm. Although it may appear bulky for a 50mm hood, it surprisingly complements a smal...
-
Condition：
-
98% Like New
-
Leitz Lens Hood IUFOO
*Shipping to Japan Only. For overseas customer, please contact us before order.IUFOO lens hood, later as 12575N, was produced by Leitz for telephoto lenses. It is compatible with E39-thread lenses such as the Elmar 90mm, Elmarit 90mm, Tele-Elmarit 90mm, and Hektor 135mm. The hood features a double-hook locking mechanism, with a black-painted finish on the hood section and a matte chrome finish ...
-
Condition：
-
91% C
-
Leitz Lens Hood FIKUS Nickel
Leitz FIKUS Zoom Hood for 35/50/90/135mm lenses. A36 slip-on (36mm). A rare nickel version.This unit is engraved with markings for 13.5cm, 9cm, Elmar 5cm, and Hektor 5cm. The hood section features a silver inlay Ernst Leitz Wetzlar engraving.An excellent accessory for those who use black-painted Barnack Leicas such as the DII or DIII, or nickel-finished lenses. A versatile hood that fits four d...
-
Condition：
-
93% B
-
Walz Lens Hood for Summicron 50mm
*Shipping to Japan Only.The Summicron 50mm f2 push-on lens hood, made by the Japanese photo equipment manufacturer, Waltz. It is similar in design to the hood for the Summarit 50mm f1.5, resembling the XOONS design. With a 42mm push-on diameter, it fits most 50mm lenses with an E39 size.Although the design is similar to the XOONS, it fits both the Summicron and Summitar lenses, which makes it a...
-
Condition：
-
94% A
-
Walz Lens Hood for Summarit 50mm
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a Japanese-made copy of the XOONS hood, designed for the Summarit/Xenon 50mm lens, produced by the WALTZ company. It fits 44mm screw-on threads. There is also a similar version for 42mm (E39) threads, suitable for lenses like the Summicron.When compared to the original XOONS, the texture of the finish and the...
-
Condition：
-
94% A
-
Hektor 28mm f6.3 Lens Hood SOOHN
Hektor 2.8cm f6.3 Lens Hood. Leitz product code: SOOHN. The retaining screw is chrome-plated. Made by Leitz Germany. This hood is a 36mm slip-on type with the engraving 2.8 E.Leitz Wetzlar Germany. Notably, the cm is not engraved next to the 2.8.This sleek and simple trumpet-shaped design is a classic hood that enhances the appearance of your Leica and Hektor lens. Not only does it offer excell...
-
Condition：
-
91% C
-
Walz Lens Hood for Summicron 50mm
*Shipping to Japan Only.Slip-on lens hood for the Summicron 50mm f2, manufactured by the Japanese photo accessory company, Waltz. It shares a very similar design to the hood for the Summarit 50mm f1.5, model XOONS. With a 42mm slip-on fit, it is compatible with all E39-sized 50mm lenses.Although its appearance resembles the XOONS, it is designed to fit the Summicron and Summitar, which may be ...
-
Condition：
-
96% Like New
-
Elmar-M 50mm f2.8 Hood 12549
*Shipping to Japan only. For overseas customer, please contact us before order.A hood for the Elmar-M 50mm f2.8, reissued in 1994. Leica’s product code is 12549. It features a chrome-plated finish. With its E39 screw-in design, this hood is not limited to the Elmar; it can also be attached to a variety of lenses, including vintage Summicron models and even non-Leitz lenses. Many of our custom...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
The hood for the Elmar 35mm f3.5, FLQOO. A36 push-on type. The retaining screw is chrome-plated. This particular model features white-painted lettering in the engraving. The appearance is similar to the FISON and FLQOO hoods, but the diameter and length differ.With its simple design, this hood enhances the appearance of your lenses. True to Leitz’s craftsmanship, it’s a slightly rare hood.This ...
-
Condition：
-
92% B
-
Zeiss Lens Hood 40.5mm for Contax
*Shipping to Japan Only.A lens hood for Contax cameras, manufactured by Zeiss Ikon Stuttgart. Product code: 1104. 40.5mm screw-in. Both the hood and the base are made of bakelite and are molded as a single piece.This product dates back to the era of the Contax IIa and IIIa models and is compatible with the 50mm Sonnar and Tessar lenses.Around the same time, Zeiss Ikon East Germany also released...
-
Condition：
-
92% B
-
Hektor 28mm f6.3 Lens Hood SOOHN New York
SOOHN Hood for the Hektor 28mm Lens, made by Leitz New York. The retaining screw is chrome, and the construction differs slightly from the original Wetzlar-made version. While the interior of the hood is matte-coated, it lacks the fine ribbed texture of the German version, instead featuring a somewhat rounded finish that gives it a heavier, more handcrafted feel.Leitz New York versions of the S...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Early
Early model of the FISON hood for the Leica A-type, specifically the rectangular type. It likely dates from the era of lenses such as the Leica Anastigmat, Elmax, and the early Elmar 50mm f3.5. The hood has a 36mm slip-on fitting and is molded as a single piece without any logos or engravings from Leica.The hood's base features a step, which indicates it is a later version of the rectangular-ty...
-
Condition：
-
90% C
-
Leitz Lens Hood FISON Black
Elmar 50mm lens hood, black version of the FISON. A36 size.This rare version is made entirely of aluminum, with a black paint finish. The spring-loaded part that attaches to the lens is also made of aluminum. It weighs only about 9.7g, making it exceptionally lightweight. The retaining screw is made of brass with chrome plating.The engraving is simple, with "E.Leitz Wetzlar" on the base and "El...
-
Condition：
-
94% A
-
Leitz Lens Hood IROOA
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica's classic lens hood, IROOA, commonly known as Iroa. The later product code is 12571J. Double-hook design.The IROOA comes in various versions, and this one is the type with six different compatible lenses engraved on it.It is compatible with lenses with a 39mm screw thread (E39). Compatible lenses include the Su...
-
Condition：
-
93% B
-
Leotax Lens Hood for Simlar 50mm f3.5
*Shipping to Japan only. For overseas customer, please contact us before order.Leotax-branded. A lens hood for the Simlar 5cm f3.5. It is the type that is secured with a retaining screw. The size is A36. It is also compatible with lenses such as the Elmar.The chrome plating has a slightly shiny finish, and it is well-built.There are minor signs of wear from use, as well as some paint loss on th...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
Early model hood for the Elmar 35mm f3.5, with the engraving done in three steps and featuring inlaid silver. It is a screw-on style (A36) and is made of brass with a black paint finish. The hood is equipped with rare nickel-plated screws.Though designed for the Elmar 35mm, it has been tested and can also be used with other lenses like the Summaron 35mm, Elmar 50mm, and others. The hood is a st...
-
Condition：
-
91% B
-
Leitz Lens Hood ITOOY
*Shipping to Japan Only. For overseas customer, please contact us before order.A lens hood for the Elmar 50mm f2.8 and f3.5, with an E39 filter thread. The Leitz product code is ITOOY, and it is a later model with double hooks that allow for reverse mounting. The base of the hood is marked with both f2.8 and f3.5 inscriptions. Among Leitz's many beautifully simple lens hoods, this one stands ...
-
Condition：
-
93% B
-
Leitz Lens Hood SOOFM
A folding lens hood compatible with both the Summitar and Summicron, product code SOOFM.This particular item was manufactured after the Summitar was discontinued and is marked exclusively for the Summicron, but it is fully compatible with the Summitar as well.Please note that the older model, SOOPD, marked only for the Summitar, cannot be used with the Summicron due to the slightly larger front...
-
Condition：
-
94% A
-
Leitz Lens Hood FISON Black
Elmar 50mm Lens Hood, Black Version of FISON. A36 size. This is the second type, following the initial rectangular version, with a one-piece molded design. It has no securing screw. The addition of ribs for strength demonstrates the steady evolution in a short period. The hood features a silver inlaid Leitz Wetzlar engraving and is made of brass.There is some paint loss and slight distortion at...
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH Black
For use with lenses like the Summaron 35mm and Elmar 35mm: the FOOKH black paint hood. It has a chrome retaining screw and a 36mm slip-on fit. Despite its simplicity, it has an exceptionally well-proportioned shape, suiting both nickel and chrome lenses perfectly. Many also use it with the Elmar 50mm. A similar hood, the earlier FLQOO for the Elmar 35mm, exists, but the FOOKH is slightly shorte...
-
Condition：
-
93% B
-
Actina Lens Hood for Summicron 50mm
*Shipping to Japan Only.Lens Hood Made by Schmidt & Co. Under the Actina Brand for Leica Lenses.This lens hood was produced by Schmidt & Co., which was the Leica distributor in Japan. It is compatible with 50mm lenses like the E39-threaded Summicron and Elmar 50mm f2.8, as well as other lenses such as ITDOO and IROOA. It can also be inserted and attached in reverse. Perfect for those looking fo...
-
Condition：
-
92% B
-
Leitz Lens Hood OLLUX
This is the original hood for the early version of the Summilux 35mm f1.4, commonly known as the Steel Rim. The previous code was OLLUX. This particular item is version 3, designated as 12522H. For reference, versions 1 and 2 are marked as OLLUX, while version 4 is labeled as 12522.The beloved Steel Rim spherical Summilux 35mm f1.4 was introduced at the 1960 Photokina as the world's brightest w...
-
Condition：
-
96% Mint
-
Leitz Lens Hood FISON Black
Lens hood for the Elmar 50mm, FISON. Black version. A36 size slip-ion type.This item is a rare all-aluminum version with black paint. The spring plate that attaches to the lens is also made of aluminum. It is very lightweight, weighing approximately 9.6g. The set screw is chrome plated.The rear side has a Germany engraving. According to Flashback’s own criteria (lol), the more characters, the c...
-
Condition：
-
92% B
-
Leitz Lens Hood FIKUS Nickel
This is a zoom hood for Leica 35mm, 50mm, 90mm, and 135mm lenses, known as FIKUS. It fits 36mm filter threads (A36) and is a rare nickel version. This particular item is engraved not only for the Hektor but also for the Elmar 3.5.When the outer hood is fully collapsed, it accommodates the Elmar 35mm and Hektor 50mm lenses. If you love using black-painted Barnack models like the DII or DIII alon...
-
Condition：
-
91% BC
-
Leitz Lens Hood IUFOO
*Shipping to Japan only. For overseas customer, please contact us before order.Leitz E39 diameter hood for medium telephoto lenses, IUFOO / 12575N. It is compatible with the Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4, among others.It features a double hook. This hood, which has been produced for a long time since the single hook type, comes i...
-
Condition：
-
96% Mint
-
Summaron 28mm f5.6 Lens Hood SOOBK
Hood for the Summaron 28mm f5.6 (Red Summaron). Leitz product code is SOOBK, later 12500Y. It is an A36 slip-on hood.This is a finely crafted hood with a crinkled baked finish. Although it is an expensive hood, when mounted on the Red Summaron, it presents a compact yet dignified appearance that fulfills the desire for ownership.For those who own a Red Summaron, this is a must-have item. Which ...
-
Condition：
-
96% Mint
-
Schmidt Lens Hood for Summarit 50mm f1.5
-
Condition：
-
94% A
-
Leitz Lens Hood FLQOO
Early Model FLQOO Hood for Elmar 35mm f3.5 This hood features a three-tier engraving with silver inlay. It is a clip-on type (A36). Made of brass with black paint, it has a chrome screw for fastening.While designed for the Elmar 35mm, it is also compatible with other lenses such as the Summaron 35mm and Elmar 50mm (fitment tested). This is a very stylish hood.Its simple design enhances the look...
-
Condition：
-
93% B
-
Summarit 50mm f1.5 Lens Hood XOONS
The XOONS hood for the Summarit 50mm f1.5 is in like-new condition. It has a brass construction with a black crystalline coating, showcasing excellent craftsmanship and a substantial feel that’s rare in modern industrial products.This hood is compatible not only with the Summarit but also with the Leitz Xenon 50mm. Although it may appear bulky for a 50mm hood, it surprisingly complements a smal...
-
Condition：
-
98% Like New
-
Schmidt Lens Hood for Summarit 50mm f1.5
*Shipping to Japan Only. For overseas customer, please contact us before order.An ACTINA lens hood made for the Summarit 50mm, produced by Schmidt & Co., the Leica import agency. While not a genuine Leitz product, it is well-made and has a quality that feels comparable to original parts. The hood attaches to the lens with a screw mechanism and allows for the attachment of an E41 filter while in...
-
Condition：
-
93% B
-
Elmar 50mm Lens Hood ITOOY
*Shipping to Japan Only.Lens hood for the Elmar 50mm f2.8 and f3.5 with an E39 filter size, late version of the ITOOY. Features a double hook, allowing it to be attached in reverse. A simple yet elegantly designed hood.The hood has a tiny paint loss at the tip and some light scuffing on the chrome-finished base, but overall it maintains a clean and attractive appearance. The matte black coating...
-
Condition：
-
93% B
-
Nikkor 35mm f2.5 (S) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.The genuine hood for the W-Nikkor 35mm f2.5 lens, designed for the Nikon S series. It resembles the hood for the 35mm f1.8 lens but is about 2mm longer. This example bears the Mount Fuji logo (optical mark, onigiri mark) and corresponds to the later version of this hood.It features an aluminum body with black paint. ...
-
Condition：
-
96% Mint
-
Nikkor 35mm f1.8 (S) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.The dedicated lens hood for the Nikkor 35mm f1.8 in Nikon S mount. Made of metal.This example bears the Mount Fuji logo (optical mark, onigiri mark) and corresponds to the later version of this hood.It's becoming increasingly rare to come across these nowadays. Please note that the diameter is different for the Leica...
-
Condition：
-
92% B
-
Hasselblad Lens Hood 150
*Shipping to Japan Only. Lens hood for the Hasselblad Sonnar C 150mm. Made of metal with a black paint finish. Although marked for the 150mm, it is compatible with the 100mm, 120mm, 150mm, and 250mm lenses. In later years, the marking was changed to 100 - 250. From 1974 onward, the hood was replaced with a plastic version.There is minor paint loss on the edges, but the texture of the paint reta...
-
Condition：
-
94% A
-
Hasselblad Lens Hood Shu0006
*Shipping to Japan Only.Camera & Watch Bar in Yurakucho, Okadaya, has planned and manufactured this lens hood for Hasselblad cameras. Made in Japan.This hood can be fitted to various lenses, including the Planar C 80mm f2.8 and others like the 100mm and 150mm. It faithfully reproduces the early Hasselblad metal hoods with the characteristic palm-patterned crêpe finish on aluminum, while enhanci...
-
Condition：
-
96% Mint
-
Rollei Lens Hood (RII)
*Shipping to Japan only.Genuine lens hood for the Rolleiflex 3.5F series. Commonly known as Bayonet 2, or Bay2.There are only very minor scuffs on the tip and mount area of the hood, but otherwise, it is in near-new condition. The matte finish inside the hood is also free of scuffs. It’s so pristine that you might hesitate to use it…It comes with the original leather case and box. The price inc...
-
Condition：
-
95% Mint
-
Janua Lens Hood
*Shipping to Japan Only.Genuine hood for the Leica-style camera Janua, made by San Giorgio in Italy. 36mm slip-on. Manufactured around 1949.Although the Janua has a dedicated bayonet mount and cannot be strictly called a Leica copy, it is a very unique and charming camera in both style and mechanism. In addition to the Essegi 50mm f3.5, lenses such as the Kritios 50mm f2 and f2.8 were developed...
-
Condition：
-
98% Like New
-
Macro-Elmarit-R 60mm f2.8 Lens Hood 12514
*Shipping to Japan Only.Macro-Elmarit-R 60mm f2.8, 1st Generation Lens Hood.This lens hood is designed for the first-generation Macro-Elmarit-R 60mm f2.8 and is also compatible with the Schneider PA-Curtagon 35mm f4. Both lens names are engraved on the hood. Additionally, it can accommodate Series 8 filters.There is a very minor mark near the top right of the 12514 engraving, but otherwise, the...
-
Condition：
-
92% B
-
Hektor 28mm f6.3 Lens Hood SOOHN
Lens hood for Hektor 2.8cm f6.3 Leitz product code: SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on type.The sleek and simple trumpet-shaped design of this classic hood will enhance the look of your camera and lens. Beyond its practical benefits as a hood, it adds a striking and stylish appearance.By the way, while there is also a N.Y. Leitz version of the SOOHN hoo...
-
Condition：
-
93% B
- Choosing a selection results in a full page refresh.
- Opens in a new window.
