Skip to content
Hood
-
Leitz Lens Hood VALAU Nickel
A popular VALAU in nickel finish. An aperture control ring originally designed for use with an enlarger.This example is the early VALAU type, boldly engraved Leitz Wetzlar. It has a more classical appearance. Later versions adopted the hexagonal Leitz logo, and a chrome-plated version was also introduced.Originally, the VALAU hood was intended for use with the Leica L-mount Elmar 50mm f3.5 as a...
-
Condition：
-
93% B
-
Leitz Lens Hood VALAU Nickel
The popular VALAU in nickel finish. This example is the later nickel VALAU with the hexagonal Leitz logo engraving.Originally, it was designed as a hood to use the Leica L-mount Elmar 50mm f3.5 for enlarging work. It was an innovative accessory that made aperture operation in the darkroom dramatically easier. Today, however, it is more often used for shooting purposes.Not only is it highly prac...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Black
Black version of the FISON lens hood for the Elmar 50mm. A36 size.Black paint finish. The spring clip that attaches to the lens and the hood section itself are made of aluminum, while the outer base ring is made of brass. A rather unusual variation. The weight is approximately 9.6g, making it extremely lightweight. The retaining screw is brass with chrome plating.The engravings on the hood sect...
-
Condition：
-
92% B
-
Leitz Lens Hood ITDOO
*Shipping within Japan only. For overseas customers, please contact us before placing an order. lens hood for E39 lenses such as the Summicron 35mm, Summicron 50mm, and Summaron 35mm. Single hook type. Mounted on the lens, the ITDOO has a cleaner, more streamlined appearance than the later IROOA, and it pairs especially well with 35mm lenses such as the 8-element Summicron.A hood that embodies ...
-
Condition：
-
91% C
-
Leitz Lens Hood 12571J
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Leitz lens hood, 12571J. The former code is IROOA. Double-hook type.A classic hood for the Summicron 35mm f2 eight-element and the 50mm f2.Aside from the code number, it is identical to the final type bearing the IROOA engraving.Beautifully made, with an elegant appearance.There is a small loss of black p...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON
*Shipping to Japan only. For overseas customers, please contact us before placing an order.FISON lens hood for the Elmar 50mm, A36 size. Leitz product code: FISON / 12510.Introduced originally for the early Leica A models, the FISON evolved significantly over time despite sharing the same name, making it a particularly interesting accessory from a historical perspective.This chrome FISON is the...
-
Condition：
-
92% B
-
Leitz Lens Hood ITDOO Early
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Early ITDOO version. A rare plastic hood. Single hook type.The metal base of the hood is stamped with Summaron 3.5cm and Summicron 5cm. Compared to later ITDOO versions, the lettering is engraved in a slightly smaller font.Being made of plastic, it could crack if placed heavily on a desk with a hard thud,...
-
Condition：
-
91% C
-
Summarit 50mm f1.5 Lens Hood XOONS
*Shipping to Japan only. For overseas customers, please contact us before placing an order.The lens hood for the Summarit 50mm f1.5, XOONS, later coded 12520. It is made of brass with a black crinkle paint finish, offering impressive craftsmanship and a sense of solidity rarely found in modern industrial products.It fits not only the Summarit but also the Leitz Xenon 50mm.Although it appears ra...
-
Condition：
-
91% C
-
Nikkor 35mm f1.8 (S) Lens Hood
Dedicated lens hood for the Nikkor 35mm f1.8 in Nikon S mount. Made of metal. It has become increasingly difficult to find in recent years. This example is the early version with lettering only, and it has a very attractive appearance.Please note that even for the same W-Nikkor 35mm f1.8, the Leica L-mount version uses a different diameter. The L-mount version comes with a plastic rectangular h...
-
Condition：
-
93% B
-
Elmar-M 50mm f2.8 Hood 12549
*Shipping to Japan only. For overseas customer, please contact us before order.A hood made for the Elmar-M 50mm f2.8, reissued in 1994. Leica product code 12549. Chrome finish.It uses an E39 screw mount, so it can be fitted not only to the Elmar but also to various Leitz lenses, including period Summicron models.A very practical hood that many photographers enjoy using.Minor marks are visible o...
-
Condition：
-
92% B
-
Summilux 50mm f1.4 Lens Hood 12521G
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the Summilux 50mm f1.4, also known as the Lady. Compatible with both the first and second versions. Leitz product code is 12521G, equivalent to XOOIM.It features a finely executed finish with crinkle paint and matte chrome plating, showcasing the craftsmanship of Leitz during its golden era. A perfect m...
-
Condition：
-
93% B
-
Leitz Lens Hood IWKOO
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Lens hood for the Super Angulon 21mm f4. Leitz product code is IWKOO, later 12502N.Features the IWKOO engraving, with slightly smaller lettering. A very stylish hood when mounted on the lens.Light wear can be seen on the front edge of the hood and on the chrome finish, but the matte black coating inside r...
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH
*Shipping to Japan only. For overseas customer, please contact us before order.Leica genuine 36mm slip-on hood, FOOKH. This original hood fits the Summaron 35mm f3.5, Elmar 35mm f3.5 and related lenses, finished in chrome.It is the successor to the FLQOO hood for the Elmar 35mm f3.5.A simple yet stylish hood. Its shading performance is reduced when used this way, but it can also be mounted on 5...
-
Condition：
-
92% B
-
Leitz Lens Hood VALAU Nickel
*Shipping to Japan Only.For overseas customers, please contact us before placing an order.A popular VALAU in nickel finish. This one is the version with the hexagonal logo engraving. It was originally designed for enlarging work using the Leica L mount Elmar 50mm f3.5. In the darkroom, it was a groundbreaking accessory that made aperture operation dramatically easier, but today it is more commo...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON Black
A lens hood for the Elmar 50mm from the Leica Model A era, known as FISON. Made of brass with a black paint finish. This is an early version without the retaining screw, featuring a one-piece construction with reinforcing ribs on the sides for added strength. It has the silver inlay Leitz Wetzlar inscription.As Leica’s very first lens hood, the FISON enjoyed an exceptionally long production run...
-
Condition：
-
92% B
-
Summar 50mm f2 Lens Hood SOOMP
*Shipping to Japan Only.For overseas customers, please contact us before placing an order.A genuine hood for the Summar 50mm f2. Leitz product code SOOMP. A36 slip-on type with a 36mm fitting. The retaining screw is finished in chrome.With its classical shape, it offers excellent shading performance.There is a small dent on the logo-side edge of the hood, along with light scuffing and minor mar...
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
*Shipping to Japan Only. The classic Leica lens hood, IROOA, commonly known as Irooa. The later product code is 12571J. This is the double hook version.There are various variations of the IROOA, but this one is the type engraved with six compatible lenses.It fits lenses with an E39 (39mm screw-in) filter thread. Compatible lenses include the Summicron 35mm f2 8-element, Summaron 35mm f2.8 and f...
-
Condition：
-
91% C
-
Leitz Lens Hood IWKOO
Lens hood for the Super-Angulon 21mm f4. Leica product code is IWKOO, later changed to 12502N.Engraved with IWKOO marking in a small font.Not only does it provide effective shading, but it also makes your Leica with Super-Angulon look even more stylish.The hood has been repainted, but the finish is quite clean and hardly noticeable at first glance. There are some scuffs on the chrome part, but ...
-
Condition：
-
91% C
-
Elmar 50mm Lens Hood ITOOY
*Shipping to Japan Only.E39-size lens hood for Elmar 50mm f2.8 and f3.5 lenses. Leitz product code ITOOY.This is the later version with a double-hook design, allowing the hood to be mounted in reverse on the lens.Simple yet elegant in design, it remains a highly popular hood even today.There is a small mark below the Ernst engraving and some light scuffs throughout, but overall the hood remains...
-
Condition：
-
93% B
-
Leica Lens Hood 12526
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Lens hood for Leica wide-angle lenses, product code 12526.Compatible with the Summicron 35mm f2 (7-element version), Summicron-M 35mm f2 ASPH, and Elmarit-M 28mm f2.8.It is a clip-on type hood with two positioning tabs for secure attachment. Made of lightweight resin with a clean, minimalist design.An unu...
-
Condition：
-
99% Like New
-
Nikkor 35mm f1.8 (S)
-
Condition：
-
95% Mint
-
Cook & Perkins Hood for Elmar 50mm f3.5
A rare lens hood made by Cook & Perkins Ltd., a British company also known for manufacturing lens barrels for Dallmeyer and others.It fits perfectly on the Elmar 50mm f3.5 with A36 mount. The hood is attached to the Elmar with a locking screw, and by rotating the front part of the hood, the aperture can be adjusted—a clever and practical design. Aperture values are engraved around the outer rim...
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
*Shipping to Japan only. For overseas customers, please contact us before placing an order.The classic Leica lens hood IROOA. Later assigned product code 12571J. This example is the double-hook version.There are several variations of the IROOA, and this one is the type engraved with six compatible lens names. It fits E39-thread (39 mm screw-in) lenses such as the Summicron 35 mm f2 eight-elemen...
-
Condition：
-
90% C
-
Nikkor 35mm f2.5 (S) Lens Hood
Genuine hood for the W-Nikkor 35mm f2.5 lens (barrel aperture type) for Nikon S series cameras.Although very similar in shape to the hood for the 35mm f1.8, this one is about 2mm longer.This example bears the Mount Fuji logo (optical mark, onigiri mark) and corresponds to the later version of this hood.Made of aluminum with black paint finish. Rare item.No signs of use and in very beautiful con...
-
Condition：
-
96% Mint
-
Nikkor 35mm f2.5 (S) Lens Hood
Genuine lens hood for the Nikon S series W-Nikkor 35mm f2.5 lens, designed for the later barrel-aperture version.This one is the letter-only type without the Mount Fuji logo, featuring larger and bolder engraving. It represents one of the earlier versions of this hood for the later type lens. Made of aluminum with a black paint finish.Its shape is similar to the hood for the W-Nikkor 35mm f1.8 ...
-
Condition：
-
95% Mint
-
Hasselblad Professional Lens Shade
*Shipping to Japan only. For overseas customers, please contact us before placing an order.First-generation professional lens hood for Hasselblad, model 40231.Introduced in 1969 and produced until 1981, it accommodates a wide range of lenses from 38 mm to 250 mm.Two types of masks are included — one for 120 / 135 / 150 mm lenses and another for 250 mm.Finely crafted and exhibiting the high-qual...
-
Condition：
-
95% Mint
-
Reid Lens Hood Shu 0003
*Shipping to Japan Only.Camera & Watch Bar in Yurakucho, produced and manufactured by Okadaya, lens hood for the standard lens of the British Leica copy Reid, the Taylor-Hobson 2 inch f2. 36mm slip-on type. Made in Japan. Shu0003. Aluminum body with black anodized finish. A hood released more than 20 years ago in a limited run of 50 pieces.It is said to be a dead copy of the original hood for t...
-
Condition：
-
93% B
-
Summarit 50mm f1.5 Lens Hood XOONS
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Lens hood for Summarit 50mm f1.5, XOONS. Later code 12520. Made of brass with black crinkle finish, showcasing superb craftsmanship. It has a sense of weight and solidity rarely seen in modern industrial products.Not only for the Summarit, but it also fits the Leitz Xenon 50mm.Although it appears rather b...
-
Condition：
-
93% B
-
Leitz Lens Hood 12585
*Shipping to Japan Only.
-
Condition：
-
94% A
-
Rollei 35 Rubber Lens Hood
*Shipping to Japan Only.
-
Condition：
-
95% Mint
-
Xenon 50mm f1.5 Lens Hood XIOOM
Collapsible hood for Xenon 50mm f1.5, XIOOM. This type uses a set screw to secure the hood, a construction also seen on the Summitar hood SOOPD and the Summicron hood SOOFM.While its appearance when mounted is rather imposing, the effectiveness as a hood is outstanding.Leitz code name is XIOOM. The code closely resembles XOOIM, the hood for the first Summilux 50mm f1.4, yet it conveys the linea...
-
Condition：
-
93% B
-
Xenon 50mm f1.5 Lens Hood XIOOM New York Leitz
A folding hood for the Xenon made by New York Leitz. Leitz code XIOOM. Finished in black paint. Since it is a screw-type fastener, this is one of the earlier versions of the XIOOM. The screw itself is chrome.While chrome-finished XIOOM hoods with a side button locking mechanism are occasionally seen, the black paint screw-type is extremely rare. In addition, the fact that the word XENON is engr...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
This is a genuine Leica lens hood made for the earliest version of the Summilux 35mm f1.4, commonly known as the Steel Rim. The earlier designation was OLLUX, but this particular piece is the third version, marked 12522H. For reference, versions 1 and 2 are engraved OLLUX, while the following version 4 is marked 12522.The beloved first-generation spherical Summilux 35mm f1.4, affectionately kno...
-
Condition：
-
97% Like New
-
Leitz VIDOM Finder VIOOH + TUVOO
Leitz upright viewfinder VIOOH, black/chrome finish. A standard Leitz viewfinder produced over a long period from around 1938 to 1964. Features frame selection for 35/50/85/90/135mm. Parallax correction is marked in meters. When you change the focal length while looking through it, the frame narrows dramatically, giving it a distinctly cyber-like feel.This example comes with the rare 28mm attac...
-
Condition：
-
94% A
-
Leitz Lens Hood 12585
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Leitz 12585 lens hood. This genuine hood was supplied during the era of the 2nd generation Summicron 50mm and 35mm, serving as the successor to the ITDOO and IROOA hoods.It is a standard hood compatible with many E39 diameter lenses, including the Summicron 35mm f2 and 50mm f2, as well as the Summaron and...
-
Condition：
-
96% Mint
-
Alpa Macro-Switar 50mm f1.9 Lens Hood
Genuine lens hood for the Alpa Macro-Switar 50mm f1.9. Alpa product code OMXABE / 72302. Naturally, it can also be used with the Macro-Switar f1.8. Made of aluminum with a solid build.Increasingly becoming a rare item, this hood for the Macro-Switar f1.9 is unused and comes with its original box. It is so pristine that it feels almost impossible to use.An exceptionally hard-to-find condition.A ...
-
Condition：
-
97% Like New
-
Leitz Lens Hood ITDOO
Leitz lens hood, ITDOO. A classic hood for the Summicron 50mm and Summaron 35mm lenses, featuring a single hook mount. Compared to its successor, the IROOA, the ITDOO has a cleaner, more stylish design. A beautifully minimal accessory, showcasing the excellence of Leitz craftsmanship.There are several variations of the ITDOO, and this one is the standard type with lens names engraved. In the ea...
-
Condition：
-
94% A
-
Nikkor 50mm f1.1 (S) Lens Hood
Genuine lens hood for the Nikkor-N 50mm f1.1. Made of plastic. Designed for the Nikon S series.It is said that the hood for the Leica L mount version of the same lens was made of metal.Screw-in type with 62mm thread.Far rarer than the lens itself, this is a highly scarce hood.There are slight scuffs on the outer surface of the hood, but no cracks or damage. It has been confirmed to fit the Nikk...
-
Condition：
-
93% B
-
Nikkor 28mm f3.5 Lens Hood Black
Later-type lens hood for the Nikkor 28mm f3.5 in Nikon S mount. This version features a two-tone finish with black paint and glossy chrome plating, designed to match the later black-bodied lens, in contrast to the earlier chrome-finished hood. Screw-in type with a two-piece structure that allows a Series 7 filter to be inserted between the components. It has an exceptionally high-quality and re...
-
Condition：
-
93% B
-
Nikkor 50mm f1.4 (L) Lens Hood
Lens hood for Nikkor 50mm f1.4, compatible with both Leica screw mount and Nikon S mount. Features a 43mm diameter and a two-piece screw-in design, model AN-43mm. While the early versions were made of aluminum, this particular item is the final version, made of brass with black paint finish.A Series 7 filter can be inserted between the hood and its base.In addition to the Nikkor 50mm f1.4, it a...
-
Condition：
-
97% Like New
-
Nikkor 35mm f1.8 (L) Lens Hood
Dedicated lens hood for the W-Nikkor 35mm f1.8 in Leica screw mount. Made of plastic.It has a different filter thread from the hood for the Nikkor 35mm f1.8 in Nikon S mount, so they are not compatible.The 35mm f1.8 lens for L mount itself is already quite rare and hard to find, but this plastic hood is even rarer and seldom seen on the market.It features a square-shaped plastic design, and the...
-
Condition：
-
94% A
-
Leitz Lens Hood OLLUX
Lens hood specifically designed for the Summilux 35mm f1.4 1st version, commonly known as the Steel Rim. This hood is called OLLUX, with a later product code of 12522H. This particular piece is the earlier version engraved with OLLUX, which was later renamed to 12522. Moreover, it is the second variation among the OLLUX-marked hoods, featuring engraved arrows on both sides.With its stylish desi...
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH Black
A black paint version of the FOOKH lens hood, designed for Summaron 35mm, Elmar 35mm, and similar lenses. It features a chrome retaining screw and fits 36mm slip-on mounts.Though simple in design, the hood has an exceptionally well-balanced shape that complements both nickel and chrome lenses. Many users also use it with Elmar 50mm lenses.A similar hood is the earlier FLQOO, made for the first-...
-
Condition：
-
92% BC
-
Leitz Lens Hood FLQOO N.Y. Leitz
FLQOO lens hood made by Leitz New York. Black paint finish on brass with chrome screw. A36 size.Dimensions are nearly identical to the German-made FLQOO, but the engraving marking it for the Elmar 50mm is perhaps the most notable difference.It can also be used with the Elmar 35mm and Summaron 35mm lenses, not just the Elmar 50mm.Compared to the original German FLQOO, the front rim is thinner, a...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
Dedicated hood for the legendary Summilux 35mm f1.4 1st, commonly known as the Steel Rim. This hood is renowned not only for its function but also for its elegant appearance when mounted. Leica product code is OLLUX, and the later code is 12522H. Often referred to as Ollux in the collector community.This item is the early version with the OLLUX engraving (later versions are marked 12522H), spec...
-
Condition：
-
95% Mint
-
Leitz Lens Hood IWKOO
Super-Angulon 21mm f4 lens hood. Leica product code is IWKOO / 12502N.This is the later version engraved with 12502N.A beautifully designed hood that looks excellent when mounted on the lens.The item shows only the slightest signs of use and has an exceptionally clean appearance.The black-painted hood section has a small spot of paint loss at the tip, but overall it is in barely used condition....
-
Condition：
-
95% Mint
-
Zeiss Lens Hood 40.5mm for Contax
*Shipping to Japan Only. For overseas customer, please conact us before order.
-
Condition：
-
93% B
-
Rollei Lens Hood (RII)
*Shipping to Japan only. For overseas customer, please contact us before order.Genuine lens hood for the Rolleiflex 3.5F series. Commonly known as Bayonet 2 or Bay2.There are minor scuff marks on the mounting surface from attachment, but the hood shows no signs of paint loss and remains in very clean condition.The included leather case is also in excellent condition.The price includes shipping.
-
Condition：
-
94% A
-
FB-08 真鍮黒染 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw painted in black. Black oxide finish. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
FB-08 真鍮素地 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw wtih no paint. Bare brass. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
FB-08 銀漆 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw lacquered in silver. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
Leitz Lens Hood FIKUS
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica’s zoom lens hood for 35/50/90/135mm lenses — the FIKUS. Designed for 36mm slip-on mounts (A36). This version features the earlier, simpler engraving style up to Elmar 5cm. While unmarked, when the outer hood is fully retracted, it can also accommodate the Elmar 35mm and Hektor 50mm lenses.The FIKUS hood was int...
-
Condition：
-
93% B
-
Cook & Perkins Hood for Elmar 50mm f3.5
Rare lens hood from Cook&Perkins, England. Fits with screw stopper. Move the apature ring with this hood. Light weight, made of aluminum. Very good condition for use and also collection! *The camera and lens are not included.
-
Condition：
-
93% B
-
Cook & Perkins Hood for Elmar 50mm f3.5
Rare lens hood from Cook&Perkins, England. Fits with screw stopper. Move the apature ring with this hood. Light weight, made of aluminum. No dents. Very good condition. Good for collection.
-
Condition：
-
94% A
-
Cook & Perkins Hood for Elmar 50mm f3.5
Cook & Perkins' lens hood for Elmar 50mm f3.5 prewar model. F numbers are f3.5, 4.5, 6.3, 9, 12.5, 18.Made of aluminium and very light. Very attractive accessory. Rare item.Very used condition. No dents. Looks like used Angenieux lens.Good working condition. Comes with protection filter inside.
-
Condition：
-
91% BC
-
Cook & Perkins Hood for Elmar 50mm f3.5
Cook & Perkins' lens hood for Elmar 50mm f3.5 prewar model. F numbers are f3.5, 4.5, 6.3, 9, 12.5, 18.Made of aluminium and very light. Very attractive accessory. Rare item.Very used condition. No dents. Looks like used Angenieux lens.Good working condition. Comes with protection filter inside.The stopper screw was replaced to Nickel and it probably not genuine parts.
-
Condition：
-
91% C
-
Cook & Perkins Hood for Elmar 50mm f3.5
Rare lens hood from Cook&Perkins, England. With clamping screw. Move the apature ring with this hood. Light weight, made of aluminum. Used condition with good atmosphere.Lubricated and good working condition. Matches well with not only barnack Leica but also Leica M black paint.
-
Condition：
-
92% B
-
Leitz Lens Hood ITDOO Early
Early version of the ITDOO. A rare plastic model with a single hook. The metal base of the hood is engraved with Summaron 3.5cm and Summicron 5cm in slightly smaller letters than those found on later ITDOO versions.This plastic hood offers a bit of a thrill—set it down too hard and it might crack. A perfect piece for those who appreciate something a little out of the ordinary. Also a great addi...
-
Condition：
-
93% B
-
Summarit 50mm f1.5 Lens Hood XOONS
Lens hood for Summarit 50mm f1.5, model XOONS. Later assigned the code 12520. Made of brass with a black wrinkle finish, it showcases exceptional craftsmanship and a sense of weight rarely found in modern industrial products.It can be mounted not only on the Summarit but also on the Leitz Xenon 50mm.Although it appears rather bulky for a 50mm hood, it surprisingly maintains a clean and balanced...
-
Condition：
-
95% Mint
-
Elmar-M 50mm f2.8 Hood 12549
*Shipping to Japan only. For overseas customer, please contact us before order.A lens hood for the Elmar-M 50mm f2.8, reissued in 1994. Leica product code is 12549. Chrome-plated finish.Screw-in type with E39 thread, compatible not only with the Elmar but also with various classic Leitz lenses, including early Summicrons.A popular and practical hood favored by many users.There are signs of use ...
-
Condition：
-
92% B
- Choosing a selection results in a full page refresh.
- Opens in a new window.
