Skip to content
Hood
-
Nikkor 35mm f1.8 (L) Lens Hood
¥310,000
¥290,000
A dedicated lens hood for the W-Nikkor 35mm f1.8 in Leica screw mount, a lens renowned for its superb rendering. Made of plastic.It has a different filter diameter from the round hood for the Nikon S-mount Nikkor 35mm f1.8, and they are not compatible.The L-mount 35mm f1.8 lens itself was produced in limited numbers and is already quite difficult to find, but this plastic hood is even rarer and...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
¥195,000
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 OLLUX engrave. Eerly type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.Very used condition. Good fitting on lens. No backlash. No warp. Very good atmosphere with used body and lens.
-
Condition：
-
90% C
-
Stemar 33mm f3.5 Lens Hood
¥88,000
Lens hood for Stemmer 33mm f3.5, Leia screw mount stereo lens. There are some variation on this hood and this one is made by Leitz Canada. With Midland Ont inscription. Rare hood.
Very very slight paint off on the edge, yet otherparts are very clean.
-
Condition：
-
95% Mint
-
Nikkor 35mm f2.5 (S) Lens Hood
¥55,000
Genuine lens hood for the Nikon S series W-Nikkor 35mm f2.5 lens, designed for the later barrel-aperture version.This one is the letter-only type without the Mount Fuji logo, featuring larger and bolder engraving. It represents one of the earlier versions of this hood for the later type lens. Made of aluminum with a black paint finish.Its shape is similar to the hood for the W-Nikkor 35mm f1.8 ...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON Black
¥48,000
*Shipping to Japan Only. For overseas customer, please contact us before order.In this special feature, we are introducing 13 FISON hoods all at once, and this is the 5th version. 5/13One-piece construction, engraved marking moved to the top, wide ribbed finish, no locking screw.A hood for the Elmar 50mm f3.5.This type followed the rectangular hood for the very earliest Leica Model A, and repre...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Black
¥46,000
*Shipping to Japan Only. For overseas customer, please contact us before order.In this feature, we are introducing 13 FISON hoods all at once, and this is the 9th version. 9/13With retaining screw, brass body with aluminum front section, chrome-plated screw, two-line engraving.A hood for the Elmar 50mm f3.5.This is a black-painted FISON, a later screw-equipped model. Compared with the previous ...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON Black
¥45,000
*Shipping to Japan Only. For overseas customer, please contact us before order.In this feature, we are introducing 13 FISON hoods all at once, and this is the fourth version. 4/13One-piece construction, engraved, narrow ribbed design, no retaining screw.A lens hood for the Elmar 50mm f3.5.This is the type that followed the rectangular hood for the very earliest Leica Model A, and is an early sc...
-
Condition：
-
92% B
-
Leitz Lens Hood FIKUS Nickel
¥44,000
*Shipping to Japan Only.Leitz zoom hood FIKUS for 35/50/90/135mm lenses. A36 slip-on type. Rare nickel version. This example is engraved with 13.5cm, 9cm, Elmar 5cm, and Hektor 5cm. The hood section features a silver inlay reading Ernst Leitz Wetzlar.Ideal for black paint Barnack Leicas such as the DII and DIII, as well as for those who favor nickel lenses. A convenient accessory that allows on...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON Black
¥43,000
*Shipping to Japan Only. For overseas customer, please contact us before order.In this special feature, we are introducing 13 FISON hoods all at once. This is the third version. 3/13One-piece construction, engraved, no ribbing, no retaining screw.A lens hood for the Elmar 50mm f3.5.This is the type that followed the rectangular hood for the very earliest Leica Model A, and is an early screwless...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON Black
¥43,000
*Shipping to Japan Only. For overseas customer, please contact us before order.This special feature introduces 13 FISON hoods all at once, and this is the sixth version. 6/13With set screw, all brass, nickel screw, two-line engraving.A hood for the Elmar 50mm f3.5.From this model onward, a set screw was adopted. A major turning point in FISON history, haha.This is an early screw-type FISON. Whi...
-
Condition：
-
92% B
-
Leitz VIDOM Finder VIOOH
¥38,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz VIOOH, the upright-image Vidom finder in black/chrome finish. Known overseas as the Imarect finder and in Japan as the upright Vidom, it was produced over a long period from around 1938 to 1964.Features switchable frames for 35/50/85/90/135mm. As you change the focal length while looking through it, the frame s...
-
Condition：
-
94% A
-
Leitz Lens Hood ITDOO
¥36,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for E39 lenses such as the Summicron 35mm, Summicron 50mm, and Summaron 35mm. Single-hook type. Compared to the later IROOA, the ITDOO gives a cleaner and more streamlined appearance when mounted on a lens, making it especially well suited to 35mm lenses such as the famed 8-element Summicron.A hood with a m...
-
Condition：
-
93% B
-
Leitz Lens Hood ITDOO
¥35,000
*Shipping to Japan Only.For overseas customer, please contact us before order.Lens hood for E39 Summicron 35mm, Summicron 50mm, Summaron 35mm and other compatible lenses. Single-hook type. Compared to the later IROOA, the ITDOO gives a cleaner and more streamlined look when mounted on a lens, and pairs especially well with 35mm lenses such as the 8-element Summicron.A hood with a minimalist fun...
-
Condition：
-
93% B
-
Elmar Lens Hood FISON New York Leitz
*Shipping to Japan Only. For overseas customer, please contact us before order.A FISON made by E. Leitz New York. A lens hood for the Elmar 50mm. It is made of brass with chrome plating, and is engraved E. Leitz N.Y. and Elmar 50mm.There are several variations of New York Leitz hoods for the Elmar 50mm. Many have a shape similar to the original Leitz FISON, but this example closely resembles th...
-
Condition：
-
93% B
-
Leitz Lens Hood ITDOO
¥32,000
*Shipping to Japan Only.Leitz lens hood, ITDOO. A classic hood for the Summicron 50mm and Summaron 35mm. Single-hook type.Compared to its successor IROOA, it features a cleaner, more streamlined design, giving it a stylish appearance. A beautifully minimal accessory typical of Leitz craftsmanship.There are several variations of the ITDOO, and this example is the standard type with the lens desi...
-
Condition：
-
93% B
-
FB-10 真鍮黒染 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Our store's original FB-10 lens hood for the Hektor 50mm f2.5, featuring aperture control functionality. The retaining screws are blackened brass.Based on the design of the FB-07 Elmar 50mm hood, this has been re-engineered specifically for the Hektor 50mm. To match the varying aperture control mechanisms of...
-
Condition：
-
100% Brand New
-
FB-10 銀漆 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback Camera proudly presents the FB-10 hood for the Hektor 50mm f2.5. When placed on the Hektor, it allows direct control of the aperture.This product features retaining screws with silver lacquer, which deepens in character over time. The subtle accent of the retaining screws, made by mixing metal powd...
-
Condition：
-
100% Brand New
-
FB-10 真鍮素地 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Our store's original Hektor 5cm f2.5 dedicated hood, FB-10. The retaining screw is made of raw brass, allowing you to enjoy the aging process over time. This hood is specially designed for Hektor lens, featuring aperture control functionality.Based on the basic design of the FB-07 Elmar hood, it has been re-...
-
Condition：
-
100% Brand New
-
Nikkor 50mm f1.4 (S) Lens Hood
¥28,000
Made by Nippon Kogaku. Lens hood for Nikon S-mount Nikkor 50mm f1.4.Features the onigiri mark and engraved NIPPON KOGAKU name.Unused and in mint condition. Perfect for a collection.Literally in like-new condition. The black paint retains its beautiful semi-gloss finish.Comes with the original box stamped Snap-on LENS HOOD 5cm F/1.4.
-
Condition：
-
97% Like New
-
FB-07 真鍮黒染 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*This is our original lens hood for the Elmar, featuring a brass black-dye retaining screw version. A hood with aperture control functionality, which has long been missing in the market, specifically designed for the A36-thread Elmar 50mm. It fits a wide range of Elmars, from the early 1920s versions to the r...
-
Condition：
-
100% Brand New
-
FB-07 銀漆 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback's handmade Elmar 50mm lens hood. When attached to any A36 diameter Elmar, it allows for easy aperture operation without any additional adjustments.This version features retaining screws with silver lacquer. The screws are subtly colored by mixing metal powder into the lacquer, and their refined app...
-
Condition：
-
100% Brand New
-
FB-07 真鍮素地 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback Camera proudly presents the FB-07 lens hood for the Elmar 50mm f3.5. This model is compatible with the A36 version of the Elmar 50mm and Elmar 35mm lenses.This particular version features retaining screws made from raw brass.While the Leica FISON hood requires cumbersome aperture adjustments, the V...
-
Condition：
-
100% Brand New
-
Leitz Lens Hood FIKUS
¥28,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Black/crinkle chrome. A zoom hood with an A36 diameter for 50mm, 90mm, and 135mm lenses. When the outer hood is fully retracted, it can also be used with the Elmar 35mm f3.5.It shows no signs of use and is in beautiful condition. It's hard to believe this is nearly 70 years old, as it appears almost like new. The ori...
-
Condition：
-
97% Like New
-
Leitz Lens Hood FIKUS
¥28,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Black/texture chrome. Zoom hood for 50/90/135mm lenses with A36 diameter. Leica's product code is FIKUS, later 12530.The FIKUS hood, introduced in 1933 with black paint and nickel plating, was a long-standing product, manufactured until around 1965. This particular hood is believed to have been made in the late 1950s...
-
Condition：
-
97% Like New
-
Summilux 50mm f1.4 Lens Hood 12521G
¥27,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the Summilux 50mm f1.4, designed for the Lady version. Compatible with both 1st and 2nd versions. The Leitz product code is 12521G, equivalent to XOOIM.Featuring a finely crafted finish with a smooth, subtly textured crystal paint surface and pear-skin chrome plating, this piece reflects the outstanding...
-
Condition：
-
93% B
-
Leitz Lens Hood FIKUS
¥26,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica FIKUS variable hood for 50/90/135mm lenses. A36 type, slip-on for 36mm front diameter lenses. When the outer hood is fully retracted, it can also be used with the Elmar 35mm f3.5.As with other Leitz hoods, the FIKUS comes in quite a few variations, including different engravings and plating types. This example ...
-
Condition：
-
96% Mint
-
Summilux 50mm f1.4 Lens Hood 12586
¥24,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the early and 2nd versions of the Summilux 50mm f1.4. A successor to the XOOIM hood, designed to fit E43 Summilux lenses. Leica catalog number 12586.This example features the LEICA engraving in a digital-style font, and is believed to have been produced in or after the 1980s.There are slight scuffs on t...
-
Condition：
-
94% A
-
Summilux 50mm f1.4 Lens Hood 12586
¥24,000
*Shipping to Japan Only.Beloved by all, the lens hood for the Summilux 50mm f1.4. Leitz product code is 12586. It is the successor to the original Lady hood XOOIM and 12521, with a much more modern design. Marked LEITZ WETZLAR GERMANY.This is an item previously sold at our store. It has been carefully used by the customer and has now returned to us. Just as when it was last sold, it shows virtu...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON
¥23,000
*Shipping to Japan Only. For overseas customer, please contact us before order.In this feature, we are introducing 13 FISON hoods at once, and this is the 11th version. 11/13With retaining screw, all-brass construction, shiny chrome finish, single-line engraving.A lens hood for the Elmar 50mm f3.5. Leitz code name: FISON.This example is finished in shiny chrome, and is one of the most commonly ...
-
Condition：
-
92% B
-
FB-07 真鍮黒染 Elmar 50mm Lens Hood
¥23,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Our original hood for Elmar lenses, the FB-07. The retaining screw is blackened brass. This is a used item in like-new condition, with no signs of use.A hood with aperture control access — something that surprisingly did not exist before. Designed for A36 Elmar 50mm lenses, it is compatible with a wide range of examp...
-
Condition：
-
96% Mint
-
Leitz Lens Hood IROOA
¥23,000
*Shipping to Japan Only. For overseas customer, please contact us before order.The IROOA is one of Leica’s classic, go-to lens hoods. This example is the early type, characterized by a slightly longer hood length than later versions. It fits lenses with an E39 filter thread, also known as a 39mm screw-in thread.As this is an early IROOA, the engraving lists only the Summaron 3.5cm and Summicron...
-
Condition：
-
92% B
-
Nikkor 50mm f1.4 (S) Lens Hood
¥22,000
Lens hood for Nikon S-series, Nippon Kogaku's Nikkor 50mm f1.4. It bears the simple inscription "NIKKOR." Comes with the colorful original box and packaging materials typical of that time. In brand-new condition, as if transported to the present day by a time machine. Deadstock item.
Unused item. Open box. The semi-glossy painted finish is remarkably beautiful. It takes courage to use such a pr...
-
Condition：
-
99% Like New
-
Actina Summicron 50mm Lens Hood
¥21,000
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a lens hood from the Actina brand, produced by Schmidt Shokai, the former official Leica distributor in Japan, for use with Leica lenses.It is compatible with 50mm lenses that accept ITDOO or IROOA hoods, such as the E39-mount Summicron or Elmar 50mm f/2.8.The hood can also be mounted in reverse for compact s...
-
Condition：
-
93% B
-
Leitz Lens Hood IROOA
¥20,000
*Shipping to Japan Only. For overseas customer, please contact us before order.The classic Leica lens hood IROOA, commonly known as Iroa. Later product code 12571J. Double-hook type.There are several variations of the IROOA, and this example is the two-line engraving type with four compatible lenses engraved.Fits lenses with an E39 thread (39mm screw mount). Compatible lenses include the Summic...
-
Condition：
-
92% B
-
Leitz Lens Hood IUFOO
¥20,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz hood for medium telephoto lenses with E39 thread, model IUFOO (12575). Compatible with Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.This example features a single hook. The design was later updated to a double hook, and over its long production run, various ver...
-
Condition：
-
96% Mint
-
Nikkor 50mm f2 (S) Lens Hood
¥20,000
Lens hood for Nikon S-series, Nippon Kogaku Japan's Nikkor 50mm f2. It bears the inscription "NIPPON KOGAKU JAPAN" with the rice-ball mark. It comes with the colorful original box and packaging materials typical of that era. In new-like condition, as if transported to the present day by a time machine.
Unused item. Open box. The original box shows signs of aging, with some discoloration and wri...
-
Condition：
-
98% Like New
-
Leitz Lens Hood FISON
¥18,000
*Shipping to Japan Only. For overseas customer, please contact us before order.In this feature, we are introducing 13 FISON hoods all at once, and this is the 7th version. 7/13With retaining screw, all-brass chrome-plated construction, two-line engraving.A hood for the Elmar 50mm f3.5.From around this version, the FISON becomes the more commonly seen type.While retaining the black paint and two...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON
¥18,000
*Shipping to Japan Only. For overseas customer, please contact us before order.In this feature, we are introducing 13 FISON hoods all at once, and this is the 13th version. Finally, we have reached the last one! 13/13With retaining screw, all brass, satin chrome, straight front edge.FISON lens hood for the Elmar 50mm. Chrome finish. The code name was later changed to 12510.FISON hoods came in m...
-
Condition：
-
92% B
-
Leitz Lens Hood 12575 Black
¥17,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the Tele-Elmarit 90mm f2.8 and other lenses. It fits Leica E39 90mm to 135mm lenses. Black chrome finish. 12575, formerly coded IUFOO.The all-black finish makes it a perfect match for the later version of the Tele-Elmarit 90mm f2.8 and the Tele-Elmarit 135mm.There is one extremely tiny mark on the cente...
-
Condition：
-
95% Mint
-
Voigtlander Lens Hood 37mm
¥17,000
*Shipping to Japan Only. For overseas customer, please contact us before order.310/37. A genuine Voigtländer 37mm slip-on hood. Probably made in the 1950s.It fits classic cameras such as the Bessa II equipped with Color-Skopar, Color-Heliar, or Apo-Lanthar lenses. It can also be widely used on lenses with a 35mm filter diameter.The original box is quite worn, but the hood itself is dead stock w...
-
Condition：
-
97% Like New
-
Leitz Lens Hood FISON
¥17,000
*Shipping to Japan Only. For overseas customer, please contact us before order.FISON / 12510. The final version of the FISON hood, from the era of the Red Elmar. It fits A36-size Elmar lenses across generations. Finished in finely textured matte chrome, this model features a sharper, more defined edge design.When placed side by side, it gives a noticeably different impression from earlier FISON...
-
Condition：
-
93% B
-
Leitz Lens Hood 12575
¥17,000
*Shipping to Japan Only.For overseas customers, please contact us before placing an order.A lens hood for the Tele Elmarit 90mm f2.8 and other lenses. Compatible with Leica E39 lenses in the 90mm to 135mm range. Black chrome finish. Model 12575, formerly coded IUFOO.Its all-black design is a perfect match for the later version of the Tele Elmarit 90mm f2.8 as well as the Tele Elmarit 135mm.Ther...
-
Condition：
-
93% B
-
Hasselblad Lens Hood Shu0011 for SWC
¥17,000
Shu0011. Hood for Biogon 38mm on Hasselblad SWC, SWC/M. Screw-in type and able to set geniune filter or Serie 8 filter inside. Excellent design for necessary strength, although with Lightweight and thin design. Brand New.Made by high-quality aluminium. The exterior is black anodized, and the interior is matte black painted. Maximum diameter is 12cm. Pretty large, yet SWC users would love the d...
-
Condition：
-
100% Brand New
-
Hasselblad Lens Hood Shu0012 for Distagon 50mm / 60mm
¥17,000
Hood for Distagon C 50mm and 60mm (Hasselblad). Screw-in type and able to set filter inside. Light and thin design but strong enough. New condition.
-
Condition：
-
100% Brand New
-
Hasselblad Lens Hood Shu0006
¥17,000
Shipping to Japan only.*For oversea customers, please contact us before order.
-
Condition：
-
100% Brand New
-
Nikkor 50mm f1.4 (S) Lens Hood
¥16,000
*Shipping to Japan Only.
-
Condition：
-
97% Like New
-
MS M58.5 System Hood for Angenieux 28mm f3.5
¥13,500
*Ship to Japan only.
-
Condition：
-
100% Brand New
-
MS M51.5 System Hood for Angenieux 35mm f2.5
*Ship to Japan only.
-
Condition：
-
100% Brand New
-
Rolleiflex Lens Hood (RI)
¥12,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Rolleiflex RI outer bayonet hood. Also known as Bay 1 or Bayonet 1.It can be used with Rolleicord and Rolleiflex T cameras fitted with Tessar or Xenar f3.5 lenses. The old Rolleiflex logo gives it a wonderful vintage feel.A charming, well-made hood.There are some light signs of use, along with a small amount of paint...
-
Condition：
-
93% B
-
Leitz Lens Hood 12585
¥12,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 12585 lens hood.A genuine hood supplied during the era of the Summicron 50mm and second-generation Summicron 35mm, positioned as the successor to the ITDOO and IROOA hoods. It can be mounted on many E39 lenses, including the Summicron 35mm f2 and 50mm f2, and is also compatible with the Summaron and Elmar.This ...
-
Condition：
-
92% B
-
Leitz Lens Hood IUFOO
¥12,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz lens hood for medium telephoto lenses with E39 thread, model IUFOO/12575. Compatible with lenses such as Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.This example features a single hook. Later versions were updated to a double-hook design, and over its long pro...
-
Condition：
-
92% B
-
Leitz Lens Hood 12575
¥12,000
*Shipping to Japan only. For overseas customer, please contact us before order.Leitz lens hood 12575, previously coded IUFOO. Double hook type. A lens hood designed for Leica's telephoto lenses, compatible with the Elmarit and Tele-Elmarit 90mm f2.8, as well as E39 versions of the Elmar 90mm and 135mm, and the Hektor 135mm.The hood section is finished in black chrome, while the base features a ...
-
Condition：
-
92% B
-
Leitz Lens Hood IUFOO
¥11,000
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Leitz E39 medium-telephoto lens hood IUFOO / 12575N.Compatible with Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, Elmar 135mm f4, and similar lenses.Double-hook type. This hood was produced over a long period following the earlier single-hook version, resulting in a wide var...
-
Condition：
-
93% B
-
Leitz Lens Hood 12585
¥11,000
*Shipping to Japan Only. For overseas customer, please contact us befor order.The Leitz 12585 lens hood, an original hood from the era of the second-generation Summicron 50mm and 35mm lenses.It is the successor to the ITDOO and IROOA hoods.A true classic, this hood fits most E39-diameter lenses, including the Summicron 35mm f/2, 50mm f/2, as well as the Summaron and Elmar lenses.This particular...
-
Condition：
-
91% C
-
Hasselblad Lens Hood 50
¥9,500
Lens hood for Hasselblad Distagon 50mm, 60mm.
Used condition. Good for use.
*Ship to Japan Only. For overseas customer, please contact us before order.
-
Condition：
-
92% B
-
Leica Lens Hood 12538
¥9,000
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
95% Mint
-
Hasselblad Lens Hood 60
¥7,000
*Shipping to Japan Only. For overseas customer, please contact us before order.A genuine Hasselblad lens hood for B60 mount. Designed for wide-angle lenses such as Distagon 50mm and 60mm, and Biogon 38mm in the CF, CFE, and CFI series. Product code 40668.Shows light signs of use such as minor scuffs. Suitable for practical use.Price includes domestic shipping.
-
Condition：
-
93% B
-
Rolleiflex Rubber Lens Hood (RIII)
¥7,000
Rolleiflex rubber hood for Bay 3, Rolleiflex 2.8F etc. Rubber is in good condition. No cracks. *Ship to Japan only. For oversea customers, please contact us before purchasing.
-
Condition：
-
92% B
-
Voigtlander Lens Hood 32mm
¥6,500
*Shipping to Japan Only. For overseas customer, please contact us before order.After Voigtländer was absorbed by Zeiss, this lens hood was sold under their brand.The original box bears the Zeiss part number 20.5710, while the hood itself is engraved with Voigtländer’s former part number 310/32.The hood is an original Voigtländer product from that era, a 32mm slip-on type.It is designed for the ...
-
Condition：
-
99% Like New
-
Leitz Lens Hood FISON Early
*Shipping to Japan Only. For overseas customer, please contact us before order.In this feature, we are introducing 13 FISON hoods all at once, and this piece has the honor of being No. 1. 1/13This is the earliest rectangular-type FISON hood for the Leica Model A.It is a hood from the era of the Leitz Anastigmat, Elmax, and early Elmar 50mm f3.5 lenses. Made in the 1920s. 36mm slip-on type. It i...
-
Condition：
-
93% B
- Choosing a selection results in a full page refresh.
- Opens in a new window.
