Skip to content
Hood
-
Hektor 28mm f6.3 Lens Hood SOOHN
Hood for Hektor 2.8cm f6.3. Leitz product code is SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on.The clean and simple trumpet-shaped design is a masterpiece hood that enhances your camera and lens. For those using the uncoated Hektor 28mm, this is an essential item.The white engravings are well-balanced and, combined with the attractive design, create a beautiful a...
-
Condition：
-
92% BC
-
Nikkor 28mm f3.5 Lens Hood Chrome
A rare item, a hood for the Nikkor 28mm f3.5 with Nikon S mount. This is an early chrome-finished model. It is believed to have been supplied with the white barrel lens that appeared in 1952.Screw-in type. It has a two-piece structure, allowing a Series 7 filter to be sandwiched in between. The front part is matte chrome, and the rear part is gloss chrome.As is generally the case with Nikkor wi...
-
Condition：
-
97% Like New
-
Nikkor 28mm f3.5 Lens Hood Black
Rare item. Late model hood for the Nikkor 28mm f3.5 with Nikon S mount. Unlike the early chrome-finished model, this late model matches the black barrel of the later lenses with a two-tone finish of black paint and glossy chrome plating.Screw-in type. It has a two-piece structure, allowing a Series 7 filter to be sandwiched in between. The finish is exceptionally high-quality and beautiful.As w...
-
Condition：
-
94% A
-
Janua Lens Hood
*Shipping to Japan Only.Genuine hood for the Leica-style camera Janua, made by San Giorgio in Italy. 36mm slip-on. Manufactured around 1949.Although the Janua has a dedicated bayonet mount and cannot be strictly called a Leica copy, it is a very unique and charming camera in both style and mechanism. In addition to the Essegi 50mm f3.5, lenses such as the Kritios 50mm f2 and f2.8 were developed...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 Early type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.There are minor paint chips observed on the front edges of the hood, but it's in a condition suitable for practical use without any concerns.
-
Condition：
-
92% B
-
Leitz Lens Hood OLLUX
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 Early type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.Slightly used and faint paint peels on edges. Good fitting to Steel Rim.
-
Condition：
-
93% B
-
Summarit 50mm f1.5 Lens Hood XOONS
Hood for Summilux 50mm f1.5, designated XOONS. It features an impressive construction with brass and black wrinkle paint, providing a substantial feel rarely seen in modern industrial products.This hood can be used not only with the Summilux but also with the Leitz Xenon 50mm lens.While it may appear somewhat grand for a 50mm lens hood, it surprisingly complements the Barnack Leica cameras well...
-
Condition：
-
95% Mint
-
Leitz Lens Hood IROOA
IROOA's early model. Slightly longer hood compared to later models. Later designated as 12571J. Designed for lenses with E39 diameter (39mm screw-in).Initially labeled for Summaron 3.5cm and Summicron 5cm, but also suitable for lenses like the Summicron 35mm f2 (8 elements) and Elmar 50mm f2.8.Compatible with various lenses, this simple and stylish design is a reassuring classic from Leica, the...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON Black
Lens hood for Elmar 50mm, black version of FISON. A36 size.This item is a rare all-aluminum version with black paint. The leaf spring part that attaches to the lens is also made of aluminum. It is very lightweight, weighing approximately 9g. The fastening screw is chrome.The engraving for Elmar 5cm is filled with white paint. A rare item.There is some chipping in the black paint on the leaf spr...
-
Condition：
-
94% A
-
Rollei Lens Hood (RIII)
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Bayonet III, suitable for Rolleiflex 2.8F. It features the old logo engraving, giving it a classic feel.There are slight signs of use on the paint inside the hood, but otherwise, it is a very clean hood. Comes with the case and original box.The price includes domestic shipping charges.
-
Condition：
-
94% A
-
Zeiss Lens Hood 40.5mm for Contax
Made by Zeiss Ikon Stuttgart, post-war. Catalog No. 1119. From the age of Contax IIa/IIIa. Screw-in hood for Sonnar 50mm etc. Used condition. No distortion. No dents.*Shipping to Japan Only.
-
Condition：
-
92% B
-
Canon 50mm f1.2 (L) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Canon 50mm f1.2 for Leica screw mount. Slip-on type, 58mm diameter. Can also be used with various other lenses.There is some minor paint loss on the upper edge of the hood. Otherwise, there are no significant scratches, making it a rather clean hood.Comes with an original leather case.Price includes dom...
-
Condition：
-
92% C
-
Leitz Lens Hood VALOO
The product code from Leitz is VALOO, later designated as 16620. Introduced in 1949, this is a hood originally designed for enlarging purposes, intended to improve aperture control when used with lenses like the Elmar 50mm on enlargers such as Valoy or Focomat, and focusing stages.In practice, it is also usable as a shooting hood, primarily employed today as a hood for the Elmar 50mm lens. Weig...
-
Condition：
-
95% Mint
-
Hasselblad Lens Hood 150
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Hasselblad Zeiss Sonnar C 150mm. Made of metal with a black paint finish.It is marked as 150, but it is compatible with 100mm, 120mm, 150mm, and 250mm lenses. In later years, the marking was changed to 100-250. Note that from 1974 onwards, it was made of plastic.There is minor paint loss on the edges, b...
-
Condition：
-
93% B
-
Leitz Lens Hood SOOPD for Summitar 50mm f2
Collapsible hood for the Leitz Summitar 50mm f2. Although it has an exaggerated look, its effectiveness as a hood is outstanding. Please note that it cannot be attached to the Summicron 50mm due to a slight difference in outer diameter. The product code is SOOPD.Additionally, the later version that can be used with both Summitar and Summicron has a different code, which is SOOFM. *Ship to Japan...
-
Condition：
-
94% A
-
Leitz Lens Hood SOOMP
SOOMP. Genuine hood for the Summar 50mm f2. 36mm slip-on type. The retaining screw (stopper) is chrome-plated. It cannot be used with the earliest Summar due to its rotating helicoid.The trapezoidal, widely opened front end provides a sense of security as a hood.There is some minor paint loss at the front edge of the hood. Other than that, there are only very light scuffs, with no dents or defo...
-
Condition：
-
93% B
-
Nikkor 35mm f2.5 (L) Lens Hood
The genuine lens hood for the W-Nikkor 35mm f2.5 for Leica screw mount. It differs in shape from the one for Nikon S mount. Made of plastic.The hood for the 35mm f2.5 for Nikon S mount is relatively easy to find, but the one for L mount is quite rare and difficult to find. Additionally, it can also be fitted to the Nikkor 35mm f3.5, which has the same filter size.Moreover, as a clever trick, it...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
The code was previously OLLUX. Introduced at the 1960 Photokina as the world's brightest wide-angle lens, the Spherical Summilux 35mm f1.4, also known as the Steel Rim, remained a long-lasting model until the advent of the ASPH. Despite changes in features like the filter frame and aperture stopper, it retained its significance until the introduction of the ASPH version.This is the dedicated ho...
-
Condition：
-
92% B
-
Leitz Lens Hood IUFOO
Leitz telephoto lens hood, IUFOO, later known as code 12575N. Compatible with E39 diameter Elmar, Elmarit, Tele-Elmarit 90mm, and Hektor 135mm lenses, among others. Features a double hook. The hood part is finished in black paint, and the base of the hood is pearlescent chrome. The engravings are for three types of lenses: 4.5/135, 2.8/90, 4/90. There is no marking for the 4/135 (Elmar) found o...
-
Condition：
-
92% B
-
Leitz Lens Hood 12575N
Leitz's 12575N hood, formerly known as IUFOO, is a hood for Leica's telephoto lenses. It fits the Elmarit and Tele-Elmarit 90mm f2.8, the E39 Elmar 90mm and 135mm, and the Hektor 135mm. The hood itself is finished in black chrome, while the base is a satin chrome. As it features a double hook, the hood can be attached to the lens in reverse during transport. This product is a later model of the...
-
Condition：
-
92% B
-
Leitz Lens Hood FIKUS
Black/Chrome. A36 diameter zoom hood suitable for 50/90/135mm lenses. When fully retracted, it can also be used with the Elmar 35mm f3.5.
Shows no signs of use and is in very clean condition. It's hard to believe this item is nearly 70 years old, as it looks like new. The original box is also in great condition.
-
Condition：
-
97% Like New
-
Leitz Lens Hood ITDOO
Leitz Lens Hood, ITDOO. A classic hood for use with Summicron 50mm and Summaron 35mm lenses. Single hook design.
Compared to its successor model IROOA, it features a sleeker design, presenting a stylish hood. Its minimalist construction is a remarkable piece.
While ITDOO comes in several variations, this product is the typical type with lens branding engraved. Initially, there were a few made o...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON Black
Elmar 5cm lens hood, model FISON. It features a relatively early black paint finish and fits A36 size. This item is made with brass at both the base and tip, and the securing screws are chrome.
The degree of paint wear contributes well to its rugged appearance. This item is somewhat rare.
There are signs of paint wear in various places. The tip of the hood is very slightly distorted, but it is ...
-
Condition：
-
92% B
-
Leitz Lens Hood XOONS for Summarit 50mm
Summarit 50mm f1.5 lens hood, model XOONS. Crafted from brass with a black wrinkle paint finish, it has a substantial feel rarely seen in modern industrial products.
While designed for the Summarit, it can also be fitted to the Leitz Xenon 50mm. Although slightly more elaborate for a 50mm hood, it complements the Barnack Leica cameras surprisingly well, reflecting Leica's high design quality.
...
-
Condition：
-
93% B
-
Leitz Lens Hood 12538
12538. Genuine lens hood for the Summicron 50mm f2. It can also be fitted to a 35mm lens. Made of plastic and manufactured in Canada.
This model succeeded the metal hood 12585. As hoods became integrated into the lens design after 1994, this is also the last standalone hood made for the Summicron.
It lacks the intricate craftsmanship of models like ITDOO or IROOA, but its lightweight nature is ...
-
Condition：
-
97% Mint
-
Nikkor 35mm f1.8 (S) Lens Hood
Nikon S-mount dedicated lens hood for Nikkor 35mm f/1.8. Made of metal. It has become increasingly rare recently. This one is the letter-only type without the Mount Fuji logo, featuring larger and bolder engraving. It represents one of the earlier versions.Please note that even for the same W-Nikkor 35mm f/1.8, the diameter differs for Leica L-mount, so please be careful. The L-mount version co...
-
Condition：
-
92% B
-
Leitz Lens Hood IWKOO
IWKOO / 12502N. For Super Angulon 21mm f4. Elegant style with the lens. With IWKOO engrave in small letters.
Slightly used condition. Still clean and in good condition. Fitting tested on lens.
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
The classic lens hood for Leica, the IROOA, commonly known as the Iroa. Double-hook design. The later product code is 12571J. Compatible with lenses with an E39 diameter (39mm screw-in).
While there are various variations of the IROOA, this item is a type that has six compatible lenses engraved. This version with IROOA engraving is likely the final model.
Robust construction with a simple and s...
-
Condition：
-
95% Mint
-
Leitz Lens Hood ITDOO
Leitz Lens Hood, ITDOO. A classic hood for use with Summicron 50mm and Summaron 35mm lenses. Single hook design.
Compared to its successor model IROOA, it features a sleeker design, presenting a stylish hood. Its minimalist construction is a remarkable piece.
While ITDOO comes in several variations, this product is the typical type with lens branding engraved. Initially, there were a few made o...
-
Condition：
-
94% A
-
Nikkor 50mm f1.1 (S)
Produced by Nippon Kogaku. Super fast lens. 9 elements in 6 groups. Gauss type. Debuted in 1956. 62mm filter size. Internal bayonet. Only 835pcs produced.Leica M adapter due to its protruding rear element guard. Good to use with mirror less degital camera or live view.Faint signs of use only. Still keeps very good condtion.Good working condition. Tested on Nikon S body and rangefinder coupling....
-
Condition：
-
93% B
-
Rolleiflex Standard Lens Hood
Genuine lens hood for the Rollei Standard. While there are screw-on type hoods, this product is a slightly rarer hood that is fixed with a lever to the protrusion between the upper and lower lenses.
*Shipping to Japan Only. For overseas customer, please contact us before order.
This is an item that appears unused, in like-new condition. Even the included case is in pristine condition.
It's hard...
-
Condition：
-
96% Mint
-
Leica Lens Hood 12504
12504. Lens hood for Summilux 35mm and Summicron 35mm. Leica Camera engrave. Serie 7 filter can be inserted.
*Shipping to Japan only. For overseas customer, please contact us before order.
A small dent and faint paint peels on the front part, yet no affect to use. The other parts are clean and in good shape.
-
Condition：
-
92% B
-
Canon 50mm f0.95 Lens Hood
Lens hood for Canon 50mm f0.95
While some hoods for this lens are black, this particular one has a slightly lighter brown color. Having the original box is quite rare. Good for collection.
Beautiful condition without signs of use.
-
Condition：
-
94% A
-
Actina Lens Hood for Summicron 50mm
Produced by Shmidt. Lens hood for E39 lenses such as Summicron 50mm f2 and Elmar 50mm f2.8 etc.
Used condition. Fitting tested on lens. Good for use.
*Shipping to Japan only. For overseas cutomer, please contact us before order.
-
Condition：
-
91% C
-
Walz Lens Hood for Summarit 50mm
Screw-in hood for Summarit. Manufactured by Walz. Very compact and light. Good to use. Comes with UV filter.
*Shipping to Japan only. For overseas customer, please contact us before order.
Used condition. Slight distortion. Fitting tested on Summarit. Comes with UV filter.
-
Condition：
-
90% C
-
Leitz Lens Hood ITDOO
Early type of ITDOO. For Summicron 35mm f2 and 50mm f2. Single hook. Black part of hood made of plastic. Names of useable lenses are engraved on base part plated in chrome. Rare item. Good for collection as well.
Signs of use on outer part and front edge. No crack. Fitting tested on E39 lens.
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
Leitz IROOA hood. Early type. Slightly longer hood than late model. Later code is 12571J. For E39 lenses.
Summaron 3.5cm and Summicron 5cm engrave. Usable with Summicron 35mm 8 elements and Elmar 50m f2.8 as well.
The very standard lens hood of Leitz. Simple and stylish design.
Used condition. Paint peels on front edge. Small dent. Fitting tested on lens. Good for use.
*Shipping to Japan only. ...
-
Condition：
-
93% B
-
Nikkor 35mm f1.8 (L) Lens Hood
Hood for W-Nikkor 35mm f1.8 LTM. Made of plastic. It is not usable with Nikon S mount Nikkor 35mm f1.8 as the fiter size is different.
L mount lens is pretty rare already, yet the hood is much more difficult to find.Very rare item.
No signs of use. Very clean condition. Fitting tested on lens.
-
Condition：
-
95% Mint
-
Noctilux 50mm f1.2 Lens Hood 12503
-
Condition：
-
91% C
-
Noctilux 50mm f1.2 Lens Hood 12503
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON
For Elmar 50mm. Black Paint on Brass. Early type of FISON without screw around Leica IA era. Leitz Weztlar engrave. Rare item.
Very good condition. Faint paint peels. No distortion. Fitting tested on lens.
Almost 100 years has passed since production. Aantique item. Good for Leica I with Elmar early, Elmax, Anastigmat, and DII, DIII. Good atmosphere.
-
Condition：
-
93% AB
-
Summilux-R 50mm f1.4 Lens Hood 12508
Lens hood for Summilux-R 50mm f1.4 early. 12508.
Comes with manual, hood cap, and box. Like new.
No signs of use. Beautiful condition. No marks on mount.
-
Condition：
-
98% Like New
-
Rolleiflex Standard Lens Hood
Genuine lens hood for Rolleiflex standard. 27mm slip-on type. It is also usable for Rolleiflex Original.
*Shipping to Japan only. For overseas customer, please contact us before order.
Very good condition with minimal used marks. Beautiful appearance as its age.
-
Condition：
-
94% A
-
Hektor 28mm f6.3 Lens Hood SOOHN
SOOHN. Hood for Hektor 28mm. Very light and very cool design. With chrome plated screw.
Slight used marks around outer part of hood yet still in good condition as SOOHN. Good fitting to Hektor.
-
Condition：
-
94% A
-
Leica Lens Hood 12586
For Summilux 50mm f1.4 Early and 2nd models, E43 Summilux. Successor hood of XOOIM. With LEICA engraving. Manufactured after 1980.
Faint signs of use on inner part. Very clean. Fitting tested on lens.
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
95% Mint
-
Leitz Lens Hood IROOA
IROOA / 12571J. Double hook. With Summicron 5cm, Summaron 3.5cm engraves. Also usable for Summicron 35mm. Early type of IROOA. Slightly longer than late type.
Fitting tested on lens. Slightly aged. Still keeps very good condition.
-
Condition：
-
93% B
-
Leitz Lens Hood IROOA
Leitz IROOA hood. Early type. Slightly longer hood than late model. Late code is 12571J. For E39 lenses.
Summaron 3.5cm and Summicron 5cm engrave. Usable with Summicron 35mm 8 elements and Elmar 50m f2.8 as well.
The very standard lens hood of Leitz. Simple and stylish design.
Beautiful condition. Fitting tested. Good for collection as well.
*Shipping to Japan only. For overseas customer, pleas...
-
Condition：
-
95% Mint
-
Leitz Lens Hood 12521G
12521G / XOOIM. For Summilux 50mm f1.4 1st and 2nd.
Slight signs of use. No dents. Good for use.
Comes with hood cap, a crack in center.
-
Condition：
-
93% B
-
Nikkor 50mm f1.4 (S) Lens Hood
Snap-on lens hood for Nikkor 50mm f1.4 Nikon S mount. Comes with box. Dead stock.
No signs of use. Very beautiful. Too clean to use.
-
Condition：
-
98% Like New
-
Nikkor 50mm f2 (S) Lens Hood
Snap-on lens hood for Nikkor 50mm f2 Nikon S mount. Comes with box. Dead stock.
No signs of use. Very beautiful. Good for collection as well.
-
Condition：
-
98% Like New
-
Leitz Lens Hood SOOPD for Summitar 50mm
Collapsible hood for Summitar 50mm f2. Fitting tested. Not usable with Summicron 50mm f2.
Slightly used condition. Good for use.
-
Condition：
-
93% B
-
Nikkor 35mm f2.5 (L) Lens Hood
For W-Nikkor 35mm f2.5 with Leica screw mount. Different shape from the hood for S mount. Made of plastic.
The hood for L mount is getting very difficult to find. It is useable for Nikkor 35mm f3.5. Rare item.
Slight signs of use of found on velvet inside, yet still clean appearance. Fitting tested on lens.
-
Condition：
-
94% A
-
Nikkor 35mm f1.8 (L) Lens Hood
Hood for W-Nikkor 35mm f1.8 LTM. Made of plastic. Very rare item. Already sold at our shop.
No signs of use. Very clean condition.
Sold out at our shop.
-
Condition：
-
95% Mint
-
Nikkor 50mm f1.1 (S) Lens Hood
Hood for Nikkor-N 50mm f1.1 for Nikon S. Made of plastic. 62mm screw-in. Rare item but cut in half.
Signs of use. No crack. Fitting tested on lens. Good for use.
-
Condition：
-
91% C
-
Micro-Nikkor 50mm f3.5 Lens Hood
Special hood for Micro Nikkor 50mm f3.5 applicable to both of Nikon S mount and Leica screw mount.
It allows to control aperture blades by rotation of front part of hood like Leitz VALOO and our original FB-07 hood. Rare item.
Like new condition without signs of use. Regarding how to use, please see the book on rangefinfer Nikon written by Mikio Kuno, p89.
-
Condition：
-
96% Mint
-
Nikkor 35mm f1.8 (L) Lens Hood
Hood for W-Nikkor 35mm f1.8 LTM. Made of plastic. Very rare item. Already sold at our shop.
No signs of use. Very clean condition.
-
Condition：
-
95% Mint
-
Leitz Lens Hood 12504
12504. Genuine hood for Summilux 35mm f1.4 2nd and Summicron 35mm f2 etc. Series 7 filter to be inserted between upper part and lower part.
No sign of use, like new condition.
-
Condition：
-
96% Mint
-
Rolleiflex Lens Hood (RI)
Rollei R1 Bayonet, Bay 1. For Rolleicord & Rolleiflex T and so on, with Tessar and Xenar. Very good condition.
*Shiping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
94% A
-
Leitz Lens Hood 12585
For Summicron 35mm f2, 50mm f2 and for Summaron or Elmar. Black Chrome finish. Standard lens hood fit on most of E39 lens. Successor model of IROOA.
Slight paint peels. Faint distortion. A dent around the engrave of WETZLAR. A hole in the letter of zero of 1:2.8/50
Fitting tested on lens. Good for use.
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
91% C
-
Contax Zoom Lens Hood 1283/3
1283/3. Collapsible lens hood for Contax. 3 steps pullout type. Fits on Sonnar and Tessar 50mm.
Slight deterioration of paint and faint used mark. Very beautiful condition. Comes with box.
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
94% A
- Choosing a selection results in a full page refresh.
- Opens in a new window.
