Skip to content
ACCESSORY
-
Leitz Lens Hood ITDOO
*Shipping to Japan Only.The classic Leica lens hood, ITDOO.Designed for lenses with an E39 filter thread, such as the Summicron 35mm and 50mm, and the Summaron 35mm. It features a single hook attachment. When mounted on the lens, the ITDOO has a sleeker appearance compared to the later IROOA model, giving a more fitting impression for 35mm lenses like the 8-element Summicron.This hood embodies ...
-
Condition：
-
93% B
-
Rollei Lens Hood (RII)
*Shipping to Japan only.Genuine lens hood for the Rolleiflex 3.5F series. Commonly known as Bayonet 2, or Bay2.There are only very minor scuffs on the tip and mount area of the hood, but otherwise, it is in near-new condition. The matte finish inside the hood is also free of scuffs. It’s so pristine that you might hesitate to use it…It comes with the original leather case and box. The price inc...
-
Condition：
-
95% Mint
-
Janua Lens Hood
*Shipping to Japan Only.Genuine hood for the Leica-style camera Janua, made by San Giorgio in Italy. 36mm slip-on. Manufactured around 1949.Although the Janua has a dedicated bayonet mount and cannot be strictly called a Leica copy, it is a very unique and charming camera in both style and mechanism. In addition to the Essegi 50mm f3.5, lenses such as the Kritios 50mm f2 and f2.8 were developed...
-
Condition：
-
98% Like New
-
Macro-Elmarit-R 60mm f2.8 Lens Hood 12514
¥13,000
*Shipping to Japan Only.Macro-Elmarit-R 60mm f2.8, 1st Generation Lens Hood.This lens hood is designed for the first-generation Macro-Elmarit-R 60mm f2.8 and is also compatible with the Schneider PA-Curtagon 35mm f4. Both lens names are engraved on the hood. Additionally, it can accommodate Series 8 filters.There is a very minor mark near the top right of the 12514 engraving, but otherwise, the...
-
Condition：
-
92% B
-
Hektor 28mm f6.3 Lens Hood SOOHN
Lens hood for Hektor 2.8cm f6.3 Leitz product code: SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on type.The sleek and simple trumpet-shaped design of this classic hood will enhance the look of your camera and lens. Beyond its practical benefits as a hood, it adds a striking and stylish appearance.By the way, while there is also a N.Y. Leitz version of the SOOHN hoo...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Black
*Shipping to Japan only.Elmar 50mm f3.5 Hood. Early type of FISON without retaining screw. It is from an era when the hood was made in one piece. This is likely the model following the very first FISON, which required repositioning every time the shooting distance was changed due to its rectangular shape. Made of brass with black paint.The hood measures 20mm in total length and lacks markings s...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON
¥12,000
*Shipping to Japan Only.Leitz code: FISON / 12510. Elmar 50mm lens hood, FISON. A36 size.The FISON model comes in various types depending on the era, even under the same code name, making it a fascinating accessory for historical study. This FISON chrome version is likely one of the most common types among them.Satin chrome plating shows some general wear and scratches, but there are no dents o...
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
*Shipping to Japan Only.Leica’s classic lens hood, the IROOA, also known as the IROOA. The later product code is 12571J. It fits lenses with an E39 (39mm screw-in) diameter. This version features a double-hook design. There are various versions of the IROOA, but this one is engraved with four compatible lenses.The compatible lenses include the Summicron 35mm f2 8-element, Summaron 35mm, Summicr...
-
Condition：
-
93% B
-
Rollei Lens Hood (RIII)
*Shipping to Japan only.Genuine lens hood for the Rollei Rolleiflex 2.8F series. Commonly known as Bayonet 3 (Bay3). Features the new logo engraving.Overall, there are signs of use and some retouching, but there are no noticeable dents or distortions, making it in optimal condition for practical use. Comes with a genuine leather case. Price includes domestic shipping.
-
Condition：
-
92% B
-
Robot Lens Hood
¥11,000
*Shipping to Japan Only.Lens hood for Robot cameras. Screw-in type, mainly compatible with post-war lenses that have threaded filter mounts. The screw diameter is approximately 38mm, making it suitable for many Robot Royal lenses as well. By pressing the two protrusions on the side of the hood and pushing the hood section in, it can be folded. Price includes domestic shipping.The chrome-plated ...
-
Condition：
-
93% B
-
Summicron 50mm f2 Lens Hood SOOFM
*Shipping to Japan Only.Leitz-made folding lens hood for the Summicron 50mm.This type of folding hood originated with the Xenon 50mm f1.5, and later was used for the Summitar and then became compatible with both Summitar and Summicron with the advent of the Summicron. It was exclusively used for the Summicron after the retirement of the Summitar. Knowing this history, one can truly appreciate i...
-
Condition：
-
91% C
-
Leitz Lens Hood 12585
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 12585 Lens Hood. This is the original lens hood for the second generation of Summicron 35mm and 50mm lenses, succeeding the IROOA hood.It is a classic hood that fits most lenses with a 39mm filter thread (E39), including the Summicron 35mm f2, 50mm f2, as well as the Summaron and Elmar. This is an early type wi...
-
Condition：
-
94% A
-
Leitz Lens hood IROOA
*Shipping to Japan only. For overseas customer, please contact us before order.The classic Leica lens hood, IROOA. Double hook design. The later product code is 12571J. Suitable for E39 (39mm screw-in) lenses.Like other Leica hoods, the IROOA comes in various versions. This one is an early model with a shorter hood height and features engravings for six compatible lenses. It is one of the most ...
-
Condition：
-
95% Mint
-
Leitz Lens Hood IROOA
*Shipping to Japan only. For overseas customer, please contact us before order.The classic Leica lens hood, IROOA. Double hook design, with the later product code 12571J. It fits E39 (39mm screw-on) lenses.The IROOA comes in many variations, and this particular model is a later version with a shorter hood height compared to earlier IROOA models, featuring engravings for four compatible lenses. ...
-
Condition：
-
91% C
-
Leitz Lens Hood IUFOO
*Shipping to Japan Only.The Leitz E39 screw-mount lens hood, IUFOO/12575, is compatible with medium telephoto lenses such as the Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.This piece is a single-hook model, whereas later versions feature a double-hook design. It was produced for a long time with various shapes and engravings. This specific ex...
-
Condition：
-
93% B
-
Summicron 50mm f2 Lens Hood VTROO
*Shipping to Japan Only.A lens hood for the rigid Summicron (both early and late versions) for enlarging purposes, introduced in 1956. The Leitz product code is VTROO, later updated to 16686. Although not its original purpose, it can also be used as a hood with aperture control functionality, similar to the VALOO for the Elmar 50mm.(Installation Instructions)1. Insert the two protruding parts o...
-
Condition：
-
93% B
-
FB-07 真鍮素地 Elmar 50mm Lens Hood
*Shipping to Japan Only.
-
Condition：
-
95% Mint
-
FB-07 真鍮黒染 Elmar 50mm Lens Hood
*Shipping to Japan Only.
-
Condition：
-
94% A
-
Leitz Lens Hood FIKUS Nickel
Leica Zoom Hood for 35/50/90/135mm, FIKUS. Rare nickel-plated finish. 36mm slip-on. This item features engravings for both Hektor and Summar.When the outer hood is fully retracted, it is compatible with the Elmar 35mm f3.5.The Ernst Leitz Wetzlar engraving is inlaid in silver. There is also a Germany engraving.The matte paint on the inside of the hood shows some signs of use, but otherwise, the...
-
Condition：
-
93% A
-
Leitz Lens Hood IROOA Bundeseigentum
IROOA hood for the West German Federal Army Leica M3 and others. Engraved with Bundeseigentum 12-130-0927. It is believed to have been included with military Summaron 35mm f2.8 lenses with goggles.The lens name engraving is the 6-line type. This is the final version of the IROOA designation. It is compatible with E39 type 35-50mm lenses.There are some scuffs and signs of use on the front edge a...
-
Condition：
-
93% B
-
Leitz Lens Hood 12585
*Shipping to Japan Only.Leitz 12585 lens hood, designed for the second generation of lenses like the Summicron 50mm and 35mm. It succeeded the IROOA hood.This is a classic hood that fits most E39 diameter lenses, including the Summicron 35mm f2 and 50mm f2, as well as lenses like the Summaron and Elmar. This particular hood is an early version without the 35/2 marking.It shows minimal signs of ...
-
Condition：
-
96% Mint
-
Ducati Lens Hood for Vitor 35mm f3.5
Italian-made 35mm half-frame camera standard lens hood for the Ducati Sogno and Simplex, Vitor 35mm f3.5. Ducati product code: OI 3401.1. Made of aluminum.This is a slim and charming hood. All Ducati accessories are exceptionally well-made and highly collectible.It shows almost no signs of use and is very clean.The original box is included. A rare item.
-
Condition：
-
95% Mint
-
Leitz Lens Hood 12585H
Leitz 12585H lens hood. This is the genuine hood from the second generation of Summicron 35mm and 50mm lenses, fitting most E39 diameter lenses. It succeeded the IROOA hood.It's a classic hood that can be used with lenses like the Summicron 35mm f2, 50mm f2, and others, including Summaron and Elmar lenses. This specific hood is a later type marked for the 35/2 lens.*Shipping to Japan Only. For ...
-
Condition：
-
93% B
-
Nikkor 50mm f2 (S)
Nikkor-H 5cm f2, a standard lens for the Nikon S series. It features a Sonnar-type construction with 3 groups and 6 elements. A perfect match for later models of the Nikon S2 with the black dial.At wide open, it produces soft images, but stopping down by about two stops reveals the sharp and crisp rendering typical of Nikkor lenses. It can also be used with mirrorless cameras via an adapter!The...
-
Condition：
-
93% B
-
Hasselblad Lens Hood 80
Lens hood for Hasselblad Planar 80mm lens. Made of light weight plastic.*Shipping to Japan Only. For overseas customer, please contact us before order.There are minor signs of use such as slight scratches, but no cracks are visible. It's in a good condition for practical use. Price includes tax and domestic shipping.
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO Black
Hood for Elmar 35mm f3.5, FLQOO. Slip-on type for A36. Black paint on brass, with a chrome retaining screw. The engraving is not inlaid but filled with white.Although designed for the Elmar 35mm, it can also be used with lenses like the Summaron 35mm. It is a very stylish hood. Its simple design also matches well with lenses like the Elmar 50mm.A rare item.There is a spot on the base of the hoo...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
FLQOO. Hood for Elmar 35mm f3.5. A36. The retaining screw is chrome. The appearance is similar to the successor FOOKH, but the diameter and length are different. Its simple design enhances the look of your lens. As expected from Leitz.This item has an aluminum front end and features rare white paint markings instead of inlaid engravings. Similar models exist from N.Y. Leitz, but this one is mad...
-
Condition：
-
93% B
-
Leitz Lens Hood FIKUS Nickel
Leica zoom hood for 35/50/90/135mm, FIKUS. 36mm slip-on (A36). A rare nickel version. This item is engraved with both Hektor and Elmar 3.5.When the outer hood is fully retracted, it is compatible with Elmar 35mm f3.5 & Hektor 5cm.Highly recommended for those who use black-painted Barnack models like the DII or DIII along with nickel lenses. This hood supports four types of lenses, saving space ...
-
Condition：
-
90% C
-
Summaron 28mm f5.6 Lens Hood SOOBK
12500Y. The old Leitz code is SOOBK. Lens hood for Summaron 28mm f5.6 (Red Summaron). A36 slip-on.A splendid hood with crinkle finish. Although it is quite an expensive hood, its appearance when mounted on the Red Summaron is compact yet imposing. For those who own or plan to purchase the Red Summaron, this is a must-have item. Which comes first, the lens or the hood? (LoL)There is some paint ...
-
Condition：
-
93% B
-
Hektor 28mm f6.3 Lens Hood SOOHN
Hood for Hektor 2.8cm f6.3. Leitz product code is SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on.The clean and simple trumpet-shaped design is a masterpiece hood that enhances your camera and lens. For those using the uncoated Hektor 28mm, this is an essential item.The white engravings are well-balanced and, combined with the attractive design, create a beautiful a...
-
Condition：
-
92% BC
-
Nikkor 28mm f3.5 Lens Hood Chrome
A rare item, a hood for the Nikkor 28mm f3.5 with Nikon S mount. This is an early chrome-finished model. It is believed to have been supplied with the white barrel lens that appeared in 1952.Screw-in type. It has a two-piece structure, allowing a Series 7 filter to be sandwiched in between. The front part is matte chrome, and the rear part is gloss chrome.As is generally the case with Nikkor wi...
-
Condition：
-
97% Like New
-
Nikkor 28mm f3.5 Lens Hood Black
Rare item. Late model hood for the Nikkor 28mm f3.5 with Nikon S mount. Unlike the early chrome-finished model, this late model matches the black barrel of the later lenses with a two-tone finish of black paint and glossy chrome plating.Screw-in type. It has a two-piece structure, allowing a Series 7 filter to be sandwiched in between. The finish is exceptionally high-quality and beautiful.As w...
-
Condition：
-
94% A
-
Janua Lens Hood
*Shipping to Japan Only.Genuine hood for the Leica-style camera Janua, made by San Giorgio in Italy. 36mm slip-on. Manufactured around 1949.Although the Janua has a dedicated bayonet mount and cannot be strictly called a Leica copy, it is a very unique and charming camera in both style and mechanism. In addition to the Essegi 50mm f3.5, lenses such as the Kritios 50mm f2 and f2.8 were developed...
-
Condition：
-
93% B
-
Leitz Lens Hood FOOKH
*Shipping to Japan Only.Lens hood for Summaron 35mm f3.5, Elmar 35mm f3.5, etc., FOOKH. This item has a chrome finish.The FOOKH is the successor to the FLQOO hood for the Elmar 35mm f3.5. A36, 36mm slip-on.Although it is designed for 35mm lenses, it can also be used with A36 diameter 50mm lenses. It is a simple yet stylish hood.There are about three minor dents at the tip of the hood and a slig...
-
Condition：
-
92% BC
-
Leitz Lens Hood OLLUX
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 Early type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.There are minor paint chips observed on the front edges of the hood, but it's in a condition suitable for practical use without any concerns.
-
Condition：
-
92% B
-
Leitz Lens Hood OLLUX
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 Early type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.Slightly used and faint paint peels on edges. Good fitting to Steel Rim.
-
Condition：
-
93% B
-
Summarit 50mm f1.5 Lens Hood XOONS
Hood for Summilux 50mm f1.5, designated XOONS. It features an impressive construction with brass and black wrinkle paint, providing a substantial feel rarely seen in modern industrial products.This hood can be used not only with the Summilux but also with the Leitz Xenon 50mm lens.While it may appear somewhat grand for a 50mm lens hood, it surprisingly complements the Barnack Leica cameras well...
-
Condition：
-
95% Mint
-
Leitz Lens Hood IROOA
IROOA's early model. Slightly longer hood compared to later models. Later designated as 12571J. Designed for lenses with E39 diameter (39mm screw-in).Initially labeled for Summaron 3.5cm and Summicron 5cm, but also suitable for lenses like the Summicron 35mm f2 (8 elements) and Elmar 50mm f2.8.Compatible with various lenses, this simple and stylish design is a reassuring classic from Leica, the...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON Black
Lens hood for Elmar 50mm, black version of FISON. A36 size.This item is a rare all-aluminum version with black paint. The leaf spring part that attaches to the lens is also made of aluminum. It is very lightweight, weighing approximately 9g. The fastening screw is chrome.The engraving for Elmar 5cm is filled with white paint. A rare item.There is some chipping in the black paint on the leaf spr...
-
Condition：
-
94% A
-
Rollei Lens Hood (RIII)
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Bayonet III, suitable for Rolleiflex 2.8F. It features the old logo engraving, giving it a classic feel.There are slight signs of use on the paint inside the hood, but otherwise, it is a very clean hood. Comes with the case and original box.The price includes domestic shipping charges.
-
Condition：
-
94% A
-
Zeiss Lens Hood 40.5mm for Contax
Made by Zeiss Ikon Stuttgart, post-war. Catalog No. 1119. From the age of Contax IIa/IIIa. Screw-in hood for Sonnar 50mm etc. Used condition. No distortion. No dents.*Shipping to Japan Only.
-
Condition：
-
92% B
-
Canon 50mm f1.2 (L) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Canon 50mm f1.2 for Leica screw mount. Slip-on type, 58mm diameter. Can also be used with various other lenses.There is some minor paint loss on the upper edge of the hood. Otherwise, there are no significant scratches, making it a rather clean hood.Comes with an original leather case.Price includes dom...
-
Condition：
-
92% C
-
Leitz Lens Hood VALOO
The product code from Leitz is VALOO, later designated as 16620. Introduced in 1949, this is a hood originally designed for enlarging purposes, intended to improve aperture control when used with lenses like the Elmar 50mm on enlargers such as Valoy or Focomat, and focusing stages.In practice, it is also usable as a shooting hood, primarily employed today as a hood for the Elmar 50mm lens. Weig...
-
Condition：
-
95% Mint
-
Hasselblad Lens Hood 150
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Hasselblad Zeiss Sonnar C 150mm. Made of metal with a black paint finish.It is marked as 150, but it is compatible with 100mm, 120mm, 150mm, and 250mm lenses. In later years, the marking was changed to 100-250. Note that from 1974 onwards, it was made of plastic.There is minor paint loss on the edges, b...
-
Condition：
-
93% B
-
Leitz Lens Hood VALOO
Leitz product code VALOO, later designated as 16620, refers to the lens hood introduced in 1949 for enlarging purposes. Originally designed to improve aperture control when used with lenses like the Elmar 50mm on enlargers such as the Valoy or Focomat, it has since found utility as a shooting hood. Weighing approximately 60g, it boasts a rugged appearance. Its aperture ring features a satisfyin...
-
Condition：
-
94% A
-
Leitz Lens Hood FIKUS
*Shipping to Japan Only. Black/Chrome. A36 diameter zoom hood suitable for 50/90/135mm lenses. When fully retracted, it can also be used with the Elmar 35mm f3.5.Very clean condition with faint signs of use only.
-
Condition：
-
94% A
-
Leitz Lens Hood SOOPD for Summitar 50mm f2
Collapsible hood for the Leitz Summitar 50mm f2. Although it has an exaggerated look, its effectiveness as a hood is outstanding. Please note that it cannot be attached to the Summicron 50mm due to a slight difference in outer diameter. The product code is SOOPD.Additionally, the later version that can be used with both Summitar and Summicron has a different code, which is SOOFM. *Ship to Japan...
-
Condition：
-
94% A
-
Leitz Lens Hood SOOMP
SOOMP. Genuine hood for the Summar 50mm f2. 36mm slip-on type. The retaining screw (stopper) is chrome-plated. It cannot be used with the earliest Summar due to its rotating helicoid.The trapezoidal, widely opened front end provides a sense of security as a hood.There is some minor paint loss at the front edge of the hood. Other than that, there are only very light scuffs, with no dents or defo...
-
Condition：
-
93% B
-
Nikkor 35mm f2.5 (L) Lens Hood
¥98,000
¥85,000
The genuine lens hood for the W-Nikkor 35mm f2.5 for Leica screw mount. It differs in shape from the one for Nikon S mount. Made of plastic.The hood for the 35mm f2.5 for Nikon S mount is relatively easy to find, but the one for L mount is quite rare and difficult to find. Additionally, it can also be fitted to the Nikkor 35mm f3.5, which has the same filter size.Moreover, as a clever trick, it...
-
Condition：
-
93% B
-
MS M56 System Hood for Angenieux 28mm f3.5
¥11,500
*Ship to Japan only.
-
Condition：
-
100% Brand New
-
MS M58.5 System Hood for Angenieux 28mm f3.5
¥11,500
*Ship to Japan only.
-
Condition：
-
100% Brand New
-
MS M51.5 System Hood for Angenieux 35mm f2.5
¥11,500
*Ship to Japan only.
-
Condition：
-
100% Brand New
-
Leitz Lens Hood OLLUX
The code was previously OLLUX. Introduced at the 1960 Photokina as the world's brightest wide-angle lens, the Spherical Summilux 35mm f1.4, also known as the Steel Rim, remained a long-lasting model until the advent of the ASPH. Despite changes in features like the filter frame and aperture stopper, it retained its significance until the introduction of the ASPH version.This is the dedicated ho...
-
Condition：
-
92% B
-
Leitz Lens Hood 12575N
Leitz's 12575N hood, formerly known as IUFOO, is a hood for Leica's telephoto lenses. It fits the Elmarit and Tele-Elmarit 90mm f2.8, the E39 Elmar 90mm and 135mm, and the Hektor 135mm. The hood itself is finished in black chrome, while the base is a satin chrome. As it features a double hook, the hood can be attached to the lens in reverse during transport. This product is a later model of the...
-
Condition：
-
92% B
-
Leitz Lens Hood 12585
Leitz lens hood for the Summicron 50mm and 35mm from the second generation. Features a double hook that allows for attachment in reverse. The product code is 12585. This hood is the successor to the IROOA hood. A standard hood that can be fitted to most lenses with an E39 diameter, such as the Summicron 35mm f2 and 50mm f2, and also compatible with Summaron and Elmar lenses. It's handy for Leic...
-
Condition：
-
92% BC
-
Leitz Lens Hood FIKUS
Black/Chrome. A36 diameter zoom hood suitable for 50/90/135mm lenses. When fully retracted, it can also be used with the Elmar 35mm f3.5.
Shows no signs of use and is in very clean condition. It's hard to believe this item is nearly 70 years old, as it looks like new. The original box is also in great condition.
-
Condition：
-
97% Like New
-
Leitz Lens Hood ITDOO
Leitz Lens Hood, ITDOO. A classic hood for use with Summicron 50mm and Summaron 35mm lenses. Single hook design.
Compared to its successor model IROOA, it features a sleeker design, presenting a stylish hood. Its minimalist construction is a remarkable piece.
While ITDOO comes in several variations, this product is the typical type with lens branding engraved. Initially, there were a few made o...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON Black
Elmar 5cm lens hood, model FISON. It features a relatively early black paint finish and fits A36 size. This item is made with brass at both the base and tip, and the securing screws are chrome.
The degree of paint wear contributes well to its rugged appearance. This item is somewhat rare.
There are signs of paint wear in various places. The tip of the hood is very slightly distorted, but it is ...
-
Condition：
-
92% B
-
Leitz Lens Hood XOONS for Summarit 50mm
Summarit 50mm f1.5 lens hood, model XOONS. Crafted from brass with a black wrinkle paint finish, it has a substantial feel rarely seen in modern industrial products.
While designed for the Summarit, it can also be fitted to the Leitz Xenon 50mm. Although slightly more elaborate for a 50mm hood, it complements the Barnack Leica cameras surprisingly well, reflecting Leica's high design quality.
...
-
Condition：
-
93% B
-
Leitz Lens Hood 12538
12538. Genuine lens hood for the Summicron 50mm f2. It can also be fitted to a 35mm lens. Made of plastic and manufactured in Canada.
This model succeeded the metal hood 12585. As hoods became integrated into the lens design after 1994, this is also the last standalone hood made for the Summicron.
It lacks the intricate craftsmanship of models like ITDOO or IROOA, but its lightweight nature is ...
-
Condition：
-
97% Mint
- Choosing a selection results in a full page refresh.
- Opens in a new window.
