Skip to content
ACCESSORY
-
Hektor 28mm f6.3 Lens Hood SOOHN New York
SOOHN Hood for the Hektor 28mm Lens, made by Leitz New York. The retaining screw is chrome, and the construction differs slightly from the original Wetzlar-made version. While the interior of the hood is matte-coated, it lacks the fine ribbed texture of the German version, instead featuring a somewhat rounded finish that gives it a heavier, more handcrafted feel.Leitz New York versions of the S...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Early
Early model of the FISON hood for the Leica A-type, specifically the rectangular type. It likely dates from the era of lenses such as the Leica Anastigmat, Elmax, and the early Elmar 50mm f3.5. The hood has a 36mm slip-on fitting and is molded as a single piece without any logos or engravings from Leica.The hood's base features a step, which indicates it is a later version of the rectangular-ty...
-
Condition：
-
90% C
-
Leitz Lens Hood FISON Black
¥43,000
Elmar 50mm lens hood, black version of the FISON. A36 size.This rare version is made entirely of aluminum, with a black paint finish. The spring-loaded part that attaches to the lens is also made of aluminum. It weighs only about 9.7g, making it exceptionally lightweight. The retaining screw is made of brass with chrome plating.The engraving is simple, with "E.Leitz Wetzlar" on the base and "El...
-
Condition：
-
94% A
-
Leitz Lens Hood IROOA
¥22,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica's classic lens hood, IROOA, commonly known as Iroa. The later product code is 12571J. Double-hook design.The IROOA comes in various versions, and this one is the type with six different compatible lenses engraved on it.It is compatible with lenses with a 39mm screw thread (E39). Compatible lenses include the Su...
-
Condition：
-
93% B
-
Leotax Lens Hood for Simlar 50mm f3.5
¥8,000
*Shipping to Japan only. For overseas customer, please contact us before order.Leotax-branded. A lens hood for the Simlar 5cm f3.5. It is the type that is secured with a retaining screw. The size is A36. It is also compatible with lenses such as the Elmar.The chrome plating has a slightly shiny finish, and it is well-built.There are minor signs of wear from use, as well as some paint loss on th...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
Early model hood for the Elmar 35mm f3.5, with the engraving done in three steps and featuring inlaid silver. It is a screw-on style (A36) and is made of brass with a black paint finish. The hood is equipped with rare nickel-plated screws.Though designed for the Elmar 35mm, it has been tested and can also be used with other lenses like the Summaron 35mm, Elmar 50mm, and others. The hood is a st...
-
Condition：
-
91% B
-
Leitz Lens Hood ITOOY
¥16,000
*Shipping to Japan Only. For overseas customer, please contact us before order.A lens hood for the Elmar 50mm f2.8 and f3.5, with an E39 filter thread. The Leitz product code is ITOOY, and it is a later model with double hooks that allow for reverse mounting. The base of the hood is marked with both f2.8 and f3.5 inscriptions. Among Leitz's many beautifully simple lens hoods, this one stands ...
-
Condition：
-
93% B
-
Hasselblad Magnifying Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.The Hasselblad 42013 Magnifying Hood is a first-generation model, designed for use with Hasselblad cameras such as the 500C/M. This magnifying hood replaces the original folding finder hood, providing a magnified view to aid in precise focusing and composition.One of the key benefits of this accessory is that it also...
-
Condition：
-
94% A
-
FB-07 真鍮黒染 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*This is our original lens hood for the Elmar, featuring a brass black-dye retaining screw version. A hood with aperture control functionality, which has long been missing in the market, specifically designed for the A36-thread Elmar 50mm. It fits a wide range of Elmars, from the early 1920s versions to the r...
-
Condition：
-
100% Brand New
-
FB-07 銀漆 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback's handmade Elmar 50mm lens hood. When attached to any A36 diameter Elmar, it allows for easy aperture operation without any additional adjustments.This version features retaining screws with silver lacquer. The screws are subtly colored by mixing metal powder into the lacquer, and their refined app...
-
Condition：
-
100% Brand New
-
FB-07 真鍮素地 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback Camera proudly presents the FB-07 lens hood for the Elmar 50mm f3.5. This model is compatible with the A36 version of the Elmar 50mm and Elmar 35mm lenses.This particular version features retaining screws made from raw brass.While the Leica FISON hood requires cumbersome aperture adjustments, the V...
-
Condition：
-
100% Brand New
-
FB-10 真鍮黒染 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Our store's original FB-10 lens hood for the Hektor 50mm f2.5, featuring aperture control functionality. The retaining screws are blackened brass.Based on the design of the FB-07 Elmar 50mm hood, this has been re-engineered specifically for the Hektor 50mm. To match the varying aperture control mechanisms of...
-
Condition：
-
100% Brand New
-
FB-10 銀漆 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback Camera proudly presents the FB-10 hood for the Hektor 50mm f2.5. When placed on the Hektor, it allows direct control of the aperture.This product features retaining screws with silver lacquer, which deepens in character over time. The subtle accent of the retaining screws, made by mixing metal powd...
-
Condition：
-
100% Brand New
-
FB-10 真鍮素地 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Our store's original Hektor 5cm f2.5 dedicated hood, FB-10. The retaining screw is made of raw brass, allowing you to enjoy the aging process over time. This hood is specially designed for Hektor lens, featuring aperture control functionality.Based on the basic design of the FB-07 Elmar hood, it has been re-...
-
Condition：
-
100% Brand New
-
Leitz Lens Hood SOOFM
¥18,000
A folding lens hood compatible with both the Summitar and Summicron, product code SOOFM.This particular item was manufactured after the Summitar was discontinued and is marked exclusively for the Summicron, but it is fully compatible with the Summitar as well.Please note that the older model, SOOPD, marked only for the Summitar, cannot be used with the Summicron due to the slightly larger front...
-
Condition：
-
94% A
-
Leitz Lens Hood FISON Black
¥43,000
Elmar 50mm Lens Hood, Black Version of FISON. A36 size. This is the second type, following the initial rectangular version, with a one-piece molded design. It has no securing screw. The addition of ribs for strength demonstrates the steady evolution in a short period. The hood features a silver inlaid Leitz Wetzlar engraving and is made of brass.There is some paint loss and slight distortion at...
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica original 36mm slip-on hood, model FOOKH. Chrome finish. A36 mount.This is the successor to the FLQOO hood for the Elmar 35mm f3.5, featuring a 36mm slip-on design. It is compatible with the Summaron 35mm f3.5, Elmar 35mm f3.5, and similar lenses.Although designed for 35mm lenses, it can also be used with 50mm l...
-
Condition：
-
93% B
-
Leitz Lens Hood IROOA
¥23,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica Standard Lens Hood, IROOA. The later product code is 12571J.This hood is compatible with E39 (39mm screw-in) lenses and features a double-hook design. While there are various versions of the IROOA, this particular one has markings for six compatible lenses.The compatible lenses include the Summicron 35mm f2 (8-...
-
Condition：
-
92% C
-
Leitz Lens hood IROOA
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica Standard Lens Hood, IROOA. The later product code is 12571J. This hood is compatible with E39 (39mm screw-in) lenses and features a double-hook design. While there are various versions of the IROOA, this particular one has a two-stage engraving with markings for four compatible lenses.The compatible lenses incl...
-
Condition：
-
93% B
-
Leitz Lens Hood FOOKH Black
¥70,000
For use with lenses like the Summaron 35mm and Elmar 35mm: the FOOKH black paint hood. It has a chrome retaining screw and a 36mm slip-on fit. Despite its simplicity, it has an exceptionally well-proportioned shape, suiting both nickel and chrome lenses perfectly. Many also use it with the Elmar 50mm. A similar hood, the earlier FLQOO for the Elmar 35mm, exists, but the FOOKH is slightly shorte...
-
Condition：
-
93% B
-
Leitz Lens Hood FIKUS
¥28,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Black/crinkle chrome. A zoom hood with an A36 diameter for 50mm, 90mm, and 135mm lenses. When the outer hood is fully retracted, it can also be used with the Elmar 35mm f3.5.It shows no signs of use and is in beautiful condition. It's hard to believe this is nearly 70 years old, as it appears almost like new. The ori...
-
Condition：
-
97% Like New
-
Leitz Lens Hood VALOO
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz's product code is VALOO, later changed to 16620. It’s an enlarger hood introduced in 1949. Originally designed to improve the aperture operation when using the Elmar 50mm lens on enlargers such as the Valoy or Focomat, or on focusing stages.In practice, it can also be used as a hood for photography, and today i...
-
Condition：
-
92% B
-
Leitz Lens Hood 12585
¥14,000
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
93% B
-
Actina Lens Hood for Summicron 50mm
*Shipping to Japan Only.Lens Hood Made by Schmidt & Co. Under the Actina Brand for Leica Lenses.This lens hood was produced by Schmidt & Co., which was the Leica distributor in Japan. It is compatible with 50mm lenses like the E39-threaded Summicron and Elmar 50mm f2.8, as well as other lenses such as ITDOO and IROOA. It can also be inserted and attached in reverse. Perfect for those looking fo...
-
Condition：
-
92% B
-
Leitz Lens Hood OLLUX
¥295,000
This is the original hood for the early version of the Summilux 35mm f1.4, commonly known as the Steel Rim. The previous code was OLLUX. This particular item is version 3, designated as 12522H. For reference, versions 1 and 2 are marked as OLLUX, while version 4 is labeled as 12522.The beloved Steel Rim spherical Summilux 35mm f1.4 was introduced at the 1960 Photokina as the world's brightest w...
-
Condition：
-
96% Mint
-
Leitz Lens Hood FISON Black
¥39,000
Lens hood for the Elmar 50mm, FISON. Black version. A36 size slip-ion type.This item is a rare all-aluminum version with black paint. The spring plate that attaches to the lens is also made of aluminum. It is very lightweight, weighing approximately 9.6g. The set screw is chrome plated.The rear side has a Germany engraving. According to Flashback’s own criteria (lol), the more characters, the c...
-
Condition：
-
92% B
-
Leitz Lens Hood FIKUS Nickel
This is a zoom hood for Leica 35mm, 50mm, 90mm, and 135mm lenses, known as FIKUS. It fits 36mm filter threads (A36) and is a rare nickel version. This particular item is engraved not only for the Hektor but also for the Elmar 3.5.When the outer hood is fully collapsed, it accommodates the Elmar 35mm and Hektor 50mm lenses. If you love using black-painted Barnack models like the DII or DIII alon...
-
Condition：
-
91% BC
-
Leitz Lens Hood IUFOO
¥19,000
*Shipping to Japan only. For overseas customer, please contact us before order.Leitz E39 diameter hood for medium telephoto lenses, IUFOO / 12575N. It is compatible with the Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4, among others.It features a double hook. This hood, which has been produced for a long time since the single hook type, comes i...
-
Condition：
-
96% Mint
-
Summaron 28mm f5.6 Lens Hood SOOBK
Hood for the Summaron 28mm f5.6 (Red Summaron). Leitz product code is SOOBK, later 12500Y. It is an A36 slip-on hood.This is a finely crafted hood with a crinkled baked finish. Although it is an expensive hood, when mounted on the Red Summaron, it presents a compact yet dignified appearance that fulfills the desire for ownership.For those who own a Red Summaron, this is a must-have item. Which ...
-
Condition：
-
96% Mint
-
Schmidt Lens Hood for Summarit 50mm f1.5
-
Condition：
-
94% A
-
Leitz Lens Hood FLQOO
Early Model FLQOO Hood for Elmar 35mm f3.5 This hood features a three-tier engraving with silver inlay. It is a clip-on type (A36). Made of brass with black paint, it has a chrome screw for fastening.While designed for the Elmar 35mm, it is also compatible with other lenses such as the Summaron 35mm and Elmar 50mm (fitment tested). This is a very stylish hood.Its simple design enhances the look...
-
Condition：
-
93% B
-
FB-10 真鍮素地 Hektor 50mm Lens Hood
*Ship to Japan ONLY.
-
Condition：
-
96% Mint
-
FB-07 真鍮素地 Elmar 50mm Lens Hood
*Ship to Japan ONLY
-
Condition：
-
95% Mint
-
Summarit 50mm f1.5 Lens Hood XOONS
¥45,000
The XOONS hood for the Summarit 50mm f1.5 is in like-new condition. It has a brass construction with a black crystalline coating, showcasing excellent craftsmanship and a substantial feel that’s rare in modern industrial products.This hood is compatible not only with the Summarit but also with the Leitz Xenon 50mm. Although it may appear bulky for a 50mm hood, it surprisingly complements a smal...
-
Condition：
-
98% Like New
-
Schmidt Lens Hood for Summarit 50mm f1.5
*Shipping to Japan Only. For overseas customer, please contact us before order.An ACTINA lens hood made for the Summarit 50mm, produced by Schmidt & Co., the Leica import agency. While not a genuine Leitz product, it is well-made and has a quality that feels comparable to original parts. The hood attaches to the lens with a screw mechanism and allows for the attachment of an E41 filter while in...
-
Condition：
-
93% B
-
Leitz Lens Hood FIKUS
¥28,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Black/texture chrome. Zoom hood for 50/90/135mm lenses with A36 diameter. Leica's product code is FIKUS, later 12530.The FIKUS hood, introduced in 1933 with black paint and nickel plating, was a long-standing product, manufactured until around 1965. This particular hood is believed to have been made in the late 1950s...
-
Condition：
-
97% Like New
-
Elmar 50mm Lens Hood ITOOY
*Shipping to Japan Only.Lens hood for the Elmar 50mm f2.8 and f3.5 with an E39 filter size, late version of the ITOOY. Features a double hook, allowing it to be attached in reverse. A simple yet elegantly designed hood.The hood has a tiny paint loss at the tip and some light scuffing on the chrome-finished base, but overall it maintains a clean and attractive appearance. The matte black coating...
-
Condition：
-
93% B
-
Rolleiflex Lens Hood (RIII)
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the Rolleiflex 2.8F and other RIII bayonet mount lenses. Suitable for Planar and Xenotar 80mm lenses. Features an old logo stamp and a classic look. It is in near-new condition!The hood shows almost no signs of use and is in very clean condition. The black paint on the interior is also well-preserved. T...
-
Condition：
-
95% Mint
-
Nikkor 35mm f2.5 (S) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.The genuine hood for the W-Nikkor 35mm f2.5 lens, designed for the Nikon S series. It resembles the hood for the 35mm f1.8 lens but is about 2mm longer. This particular item is the early version with the Mt. Fuji logo (optical mark, onigiri mark). It features an aluminum body with black paint. A rare item.There are n...
-
Condition：
-
96% Mint
-
Nikkor 35mm f2.5 (S) Lens Hood
¥32,000
*Shipping to Japan Only. For overseas customer, please contact us before order.The genuine hood for the W-Nikkor 35mm f2.5 lens, designed for the Nikon S series. This is the later version without the Mt. Fuji logo. It features an aluminum body with black paint. While it shares a similar shape with the hood for the S-mount W-Nikkor 35mm f1.8, this one is about 2mm longer. A rare item.There are s...
-
Condition：
-
92% B
-
Nikkor 35mm f1.8 (S) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.The dedicated lens hood for the Nikkor 35mm f1.8 in Nikon S mount. Made of metal, this is the early version with the Mt. Fuji mark (onigiri mark) engraved. It's becoming increasingly rare to come across these nowadays. Please note that the diameter is different for the Leica L-mount version of the same W-Nikkor 35mm ...
-
Condition：
-
92% B
-
Hasselblad Lens Hood 150
¥12,000
*Shipping to Japan Only. Lens hood for the Hasselblad Sonnar C 150mm. Made of metal with a black paint finish. Although marked for the 150mm, it is compatible with the 100mm, 120mm, 150mm, and 250mm lenses. In later years, the marking was changed to 100 - 250. From 1974 onward, the hood was replaced with a plastic version.There is minor paint loss on the edges, but the texture of the paint reta...
-
Condition：
-
94% A
-
Leitz Lens Hood FOOKH
*Shipping to Japan Only.Leica genuine 36mm slip-on lens hood, FOOKH. This is a genuine hood for lenses such as the Summaron 35mm f3.5 and Elmar 35mm f3.5. Chrome finish. Successor to the FLQOO hood for the Elmar 35mm f3.5. It is a simple yet stylish lens hood.There is overall light wear, and the tip of the hood has slight distortion, but it does not affect to use. The matte black finish on the ...
-
Condition：
-
92% B
-
Hasselblad Lens Hood Shu0006
¥17,000
*Shipping to Japan Only.Camera & Watch Bar in Yurakucho, Okadaya, has planned and manufactured this lens hood for Hasselblad cameras. Made in Japan.This hood can be fitted to various lenses, including the Planar C 80mm f2.8 and others like the 100mm and 150mm. It faithfully reproduces the early Hasselblad metal hoods with the characteristic palm-patterned crêpe finish on aluminum, while enhanci...
-
Condition：
-
96% Mint
-
Walz Lens Hood for Summicron 50mm
*Shipping to Japan Only.Slip-on lens hood for the Summicron 50mm f2, manufactured by the Japanese photo accessory company, Waltz. It shares a very similar design to the hood for the Summarit 50mm f1.5, model XOONS. With a 42mm slip-on fit, it is compatible with all E39-sized 50mm lenses.Although its appearance resembles the XOONS, it is designed to fit the Summicron and Summitar, which may be a...
-
Condition：
-
97% Like New
-
Wallace Heaton Hood for Elmar 50mm f3.5
*Shipping to Japan Only.Lens hood for the Elmar 50mm f3.5, made by Wallace Heaton in London, UK. The hood allows aperture control while attached to the lens. It fits perfectly with pre-war Elmar lenses.The aperture values are marked in continental style (3.5, 4.5, 6.3, 9, 12.5, 18). The hood is made of aluminum and weighs approximately 19g, making it lightweight.To attach the hood, loosen the s...
-
Condition：
-
92% B
-
Leitz Lens Hood ITDOO
*Shipping to Japan Only.The classic Leica lens hood, ITDOO.Designed for lenses with an E39 filter thread, such as the Summicron 35mm and 50mm, and the Summaron 35mm. It features a single hook attachment. When mounted on the lens, the ITDOO has a sleeker appearance compared to the later IROOA model, giving a more fitting impression for 35mm lenses like the 8-element Summicron.This hood embodies ...
-
Condition：
-
93% B
-
Rollei Lens Hood (RII)
*Shipping to Japan only.Genuine lens hood for the Rolleiflex 3.5F series. Commonly known as Bayonet 2, or Bay2.There are only very minor scuffs on the tip and mount area of the hood, but otherwise, it is in near-new condition. The matte finish inside the hood is also free of scuffs. It’s so pristine that you might hesitate to use it…It comes with the original leather case and box. The price inc...
-
Condition：
-
95% Mint
-
Janua Lens Hood
*Shipping to Japan Only.Genuine hood for the Leica-style camera Janua, made by San Giorgio in Italy. 36mm slip-on. Manufactured around 1949.Although the Janua has a dedicated bayonet mount and cannot be strictly called a Leica copy, it is a very unique and charming camera in both style and mechanism. In addition to the Essegi 50mm f3.5, lenses such as the Kritios 50mm f2 and f2.8 were developed...
-
Condition：
-
98% Like New
-
Actina Summicron 50mm Lens Hood
*Shipping to Japan Only.Actina Brand Lens Hood Made by Schmitt Shokai, Japan's Leica Agency.This lens hood was produced by Schmitt Shokai, which was the Japanese Leica agency, under the Actina brand for Leica lenses. It is compatible with 50mm lenses such as the Summicron and Elmar 50mm f2.8 with an E39 filter thread, including ITDOO and IROOA models. The hood can also be mounted in reverse. Wh...
-
Condition：
-
93% B
-
Macro-Elmarit-R 60mm f2.8 Lens Hood 12514
¥13,000
*Shipping to Japan Only.Macro-Elmarit-R 60mm f2.8, 1st Generation Lens Hood.This lens hood is designed for the first-generation Macro-Elmarit-R 60mm f2.8 and is also compatible with the Schneider PA-Curtagon 35mm f4. Both lens names are engraved on the hood. Additionally, it can accommodate Series 8 filters.There is a very minor mark near the top right of the 12514 engraving, but otherwise, the...
-
Condition：
-
92% B
-
Hektor 28mm f6.3 Lens Hood SOOHN
Lens hood for Hektor 2.8cm f6.3 Leitz product code: SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on type.The sleek and simple trumpet-shaped design of this classic hood will enhance the look of your camera and lens. Beyond its practical benefits as a hood, it adds a striking and stylish appearance.By the way, while there is also a N.Y. Leitz version of the SOOHN hoo...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Black
*Shipping to Japan only.Elmar 50mm f3.5 Hood. Early type of FISON without retaining screw. It is from an era when the hood was made in one piece. This is likely the model following the very first FISON, which required repositioning every time the shooting distance was changed due to its rectangular shape. Made of brass with black paint.The hood measures 20mm in total length and lacks markings s...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON
¥12,000
*Shipping to Japan Only.Leitz code: FISON / 12510. Elmar 50mm lens hood, FISON. A36 size.The FISON model comes in various types depending on the era, even under the same code name, making it a fascinating accessory for historical study. This FISON chrome version is likely one of the most common types among them.Satin chrome plating shows some general wear and scratches, but there are no dents o...
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
*Shipping to Japan Only.Leica’s classic lens hood, the IROOA, also known as the IROOA. The later product code is 12571J. It fits lenses with an E39 (39mm screw-in) diameter. This version features a double-hook design. There are various versions of the IROOA, but this one is engraved with four compatible lenses.The compatible lenses include the Summicron 35mm f2 8-element, Summaron 35mm, Summicr...
-
Condition：
-
93% B
-
Rollei Lens Hood (RIII)
*Shipping to Japan only.Genuine lens hood for the Rollei Rolleiflex 2.8F series. Commonly known as Bayonet 3 (Bay3). Features the new logo engraving.Overall, there are signs of use and some retouching, but there are no noticeable dents or distortions, making it in optimal condition for practical use. Comes with a genuine leather case. Price includes domestic shipping.
-
Condition：
-
92% B
-
Robot Lens Hood
¥11,000
*Shipping to Japan Only.Lens hood for Robot cameras. Screw-in type, mainly compatible with post-war lenses that have threaded filter mounts. The screw diameter is approximately 38mm, making it suitable for many Robot Royal lenses as well. By pressing the two protrusions on the side of the hood and pushing the hood section in, it can be folded. Price includes domestic shipping.The chrome-plated ...
-
Condition：
-
93% B
-
Summicron 50mm f2 Lens Hood SOOFM
*Shipping to Japan Only.Leitz-made folding lens hood for the Summicron 50mm.This type of folding hood originated with the Xenon 50mm f1.5, and later was used for the Summitar and then became compatible with both Summitar and Summicron with the advent of the Summicron. It was exclusively used for the Summicron after the retirement of the Summitar. Knowing this history, one can truly appreciate i...
-
Condition：
-
91% C
-
Leitz Lens Hood 12585
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 12585 Lens Hood. This is the original lens hood for the second generation of Summicron 35mm and 50mm lenses, succeeding the IROOA hood.It is a classic hood that fits most lenses with a 39mm filter thread (E39), including the Summicron 35mm f2, 50mm f2, as well as the Summaron and Elmar. This is an early type wi...
-
Condition：
-
94% A
-
Leitz Lens hood IROOA
*Shipping to Japan only. For overseas customer, please contact us before order.The classic Leica lens hood, IROOA. Double hook design. The later product code is 12571J. Suitable for E39 (39mm screw-in) lenses.Like other Leica hoods, the IROOA comes in various versions. This one is an early model with a shorter hood height and features engravings for six compatible lenses. It is one of the most ...
-
Condition：
-
95% Mint
- Choosing a selection results in a full page refresh.
- Opens in a new window.
