Skip to content
ACCESSORY
-
Leitz Lens Hood FISON
Lens hood for the Elmar 50mm. Leitz code FISON / 12510. A36 size (36mm slip-on).Even under the same code name FISON, there are various versions depending on the period, making it an accessory that is enjoyable to study from a historical perspective. This chrome FISON is probably the most common type among them.It fits all generations of A36-size Elmar lenses.There are extremely minor rub marks ...
-
Condition：
-
95% Mint
-
Elmar-M 50mm f2.8 Hood 12549
*Shipping to Japan only. For overseas customer, please contact us before order.A hood made for the Elmar-M 50mm f2.8, reissued in 1994. Leica product code 12549. Chrome finish.It uses an E39 screw mount, so it can be fitted not only to the Elmar but also to various Leitz lenses, including period Summicron models.A very practical hood that many photographers enjoy using.Minor marks are visible o...
-
Condition：
-
92% B
-
Leica Lens Hood 12538
¥9,000
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
95% Mint
-
Leitz VIDOM Finder VIOOH
Leitz VIOOH upright Vidom finder in black and chrome. Known overseas as the Imarect finder and in Japan as the Seisho Vidom. It was produced over a long period from around 1938 to 1964.It offers frame selection for 35, 50, 85, 90, and 135mm. When you change focal lengths while looking through the finder, the way the frame narrows with a firm mechanical motion feels strikingly futuristic and ver...
-
Condition：
-
94% A
-
Summilux 50mm f1.4 Lens Hood 12521G
¥28,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the Summilux 50mm f1.4, also known as the Lady. Compatible with both the first and second versions. Leitz product code is 12521G, equivalent to XOOIM.It features a finely executed finish with crinkle paint and matte chrome plating, showcasing the craftsmanship of Leitz during its golden era. A perfect m...
-
Condition：
-
93% B
-
Leitz Lens Hood IWKOO
¥40,000
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Lens hood for the Super Angulon 21mm f4. Leitz product code is IWKOO, later 12502N.Features the IWKOO engraving, with slightly smaller lettering. A very stylish hood when mounted on the lens.Light wear can be seen on the front edge of the hood and on the chrome finish, but the matte black coating inside r...
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH
¥18,000
*Shipping to Japan only. For overseas customer, please contact us before order.Leica genuine 36mm slip-on hood, FOOKH. This original hood fits the Summaron 35mm f3.5, Elmar 35mm f3.5 and related lenses, finished in chrome.It is the successor to the FLQOO hood for the Elmar 35mm f3.5.A simple yet stylish hood. Its shading performance is reduced when used this way, but it can also be mounted on 5...
-
Condition：
-
92% B
-
Leitz Lens Hood 12575
¥17,000
*Shipping to Japan Only.For overseas customers, please contact us before placing an order.A lens hood for the Tele Elmarit 90mm f2.8 and other lenses. Compatible with Leica E39 lenses in the 90mm to 135mm range. Black chrome finish. Model 12575, formerly coded IUFOO.Its all-black design is a perfect match for the later version of the Tele Elmarit 90mm f2.8 as well as the Tele Elmarit 135mm.Ther...
-
Condition：
-
93% B
-
Leitz Lens Hood VALAU Nickel
*Shipping to Japan Only.For overseas customers, please contact us before placing an order.A popular VALAU in nickel finish. This one is the version with the hexagonal logo engraving. It was originally designed for enlarging work using the Leica L mount Elmar 50mm f3.5. In the darkroom, it was a groundbreaking accessory that made aperture operation dramatically easier, but today it is more commo...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON Black
A lens hood for the Elmar 50mm from the Leica Model A era, known as FISON. Made of brass with a black paint finish. This is an early version without the retaining screw, featuring a one-piece construction with reinforcing ribs on the sides for added strength. It has the silver inlay Leitz Wetzlar inscription.As Leica’s very first lens hood, the FISON enjoyed an exceptionally long production run...
-
Condition：
-
92% B
-
Summar 50mm f2 Lens Hood SOOMP
¥17,000
*Shipping to Japan Only.For overseas customers, please contact us before placing an order.A genuine hood for the Summar 50mm f2. Leitz product code SOOMP. A36 slip-on type with a 36mm fitting. The retaining screw is finished in chrome.With its classical shape, it offers excellent shading performance.There is a small dent on the logo-side edge of the hood, along with light scuffing and minor mar...
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
¥17,000
*Shipping to Japan Only. The classic Leica lens hood, IROOA, commonly known as Irooa. The later product code is 12571J. This is the double hook version.There are various variations of the IROOA, but this one is the type engraved with six compatible lenses.It fits lenses with an E39 (39mm screw-in) filter thread. Compatible lenses include the Summicron 35mm f2 8-element, Summaron 35mm f2.8 and f...
-
Condition：
-
91% C
-
Elmar 50mm Lens Hood ITOOY
¥18,000
*Shipping to Japan Only.E39-size lens hood for Elmar 50mm f2.8 and f3.5 lenses. Leitz product code ITOOY.This is the later version with a double-hook design, allowing the hood to be mounted in reverse on the lens.Simple yet elegant in design, it remains a highly popular hood even today.There is a small mark below the Ernst engraving and some light scuffs throughout, but overall the hood remains...
-
Condition：
-
93% B
-
Leica Lens Hood 12526
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Lens hood for Leica wide-angle lenses, product code 12526.Compatible with the Summicron 35mm f2 (7-element version), Summicron-M 35mm f2 ASPH, and Elmarit-M 28mm f2.8.It is a clip-on type hood with two positioning tabs for secure attachment. Made of lightweight resin with a clean, minimalist design.An unu...
-
Condition：
-
99% Like New
-
Cook & Perkins Hood for Elmar 50mm f3.5
A rare lens hood made by Cook & Perkins Ltd., a British company also known for manufacturing lens barrels for Dallmeyer and others.It fits perfectly on the Elmar 50mm f3.5 with A36 mount. The hood is attached to the Elmar with a locking screw, and by rotating the front part of the hood, the aperture can be adjusted—a clever and practical design. Aperture values are engraved around the outer rim...
-
Condition：
-
92% B
-
Leitz Lens Hood IROOA
*Shipping to Japan only. For overseas customers, please contact us before placing an order.The classic Leica lens hood IROOA. Later assigned product code 12571J. This example is the double-hook version.There are several variations of the IROOA, and this one is the type engraved with six compatible lens names. It fits E39-thread (39 mm screw-in) lenses such as the Summicron 35 mm f2 eight-elemen...
-
Condition：
-
90% C
-
Nikkor 50mm f1.4 (S) Lens Hood
¥28,000
Made by Nippon Kogaku. Lens hood for Nikon S-mount Nikkor 50mm f1.4.Features the onigiri mark and engraved NIPPON KOGAKU name.Unused and in mint condition. Perfect for a collection.Literally in like-new condition. The black paint retains its beautiful semi-gloss finish.Comes with the original box stamped Snap-on LENS HOOD 5cm F/1.4.
-
Condition：
-
97% Like New
-
Nikkor 35mm f2.5 (S) Lens Hood
Genuine hood for the W-Nikkor 35mm f2.5 lens (barrel aperture type) for Nikon S series cameras.Although very similar in shape to the hood for the 35mm f1.8, this one is about 2mm longer.This example bears the Mount Fuji logo (optical mark, onigiri mark) and corresponds to the later version of this hood.Made of aluminum with black paint finish. Rare item.No signs of use and in very beautiful con...
-
Condition：
-
96% Mint
-
Nikkor 35mm f2.5 (S) Lens Hood
¥55,000
Genuine lens hood for the Nikon S series W-Nikkor 35mm f2.5 lens, designed for the later barrel-aperture version.This one is the letter-only type without the Mount Fuji logo, featuring larger and bolder engraving. It represents one of the earlier versions of this hood for the later type lens. Made of aluminum with a black paint finish.Its shape is similar to the hood for the W-Nikkor 35mm f1.8 ...
-
Condition：
-
95% Mint
-
Actina Summicron 50mm Lens Hood
¥18,000
*Shipping to Japan Only.
-
Condition：
-
93% B
-
Hasselblad Professional Lens Shade
¥15,000
*Shipping to Japan only. For overseas customers, please contact us before placing an order.First-generation professional lens hood for Hasselblad, model 40231.Introduced in 1969 and produced until 1981, it accommodates a wide range of lenses from 38 mm to 250 mm.Two types of masks are included — one for 120 / 135 / 150 mm lenses and another for 250 mm.Finely crafted and exhibiting the high-qual...
-
Condition：
-
95% Mint
-
Reid Lens Hood Shu 0003
*Shipping to Japan Only.Camera & Watch Bar in Yurakucho, produced and manufactured by Okadaya, lens hood for the standard lens of the British Leica copy Reid, the Taylor-Hobson 2 inch f2. 36mm slip-on type. Made in Japan. Shu0003. Aluminum body with black anodized finish. A hood released more than 20 years ago in a limited run of 50 pieces.It is said to be a dead copy of the original hood for t...
-
Condition：
-
93% B
-
Summilux 50mm f1.4 Lens Hood 12586
¥24,000
*Shipping to Japan Only.Beloved by all, the lens hood for the Summilux 50mm f1.4. Leitz product code is 12586. It is the successor to the original Lady hood XOOIM and 12521, with a much more modern design. Marked LEITZ WETZLAR GERMANY.This is an item previously sold at our store. It has been carefully used by the customer and has now returned to us. Just as when it was last sold, it shows virtu...
-
Condition：
-
95% Mint
-
FB-07 真鍮素地 Elmar 50mm Lens Hood
¥23,000
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Our original Elmar hood, FB-07. This item is a lightly used secondhand piece. The securing screw is bare brass.A unique hood with an aperture control feature, something that had never existed before. Designed for A36 diameter Elmar 50mm lenses. It covers a wide range, from the 1920s Anastigmat, Elmax, and...
-
Condition：
-
95% Mint
-
FB-10 真鍮素地 Hektor 50mm Lens Hood
*Shipping to Japan Only.Our original lens hood for the Hektor 50mm f2.5. Pre-owned, but with minimal signs of use.Equipped with an aperture control function. The fastening screw is bare brass.Based on the design of the FB-07 for the Elmar 50mm, it has been redesigned specifically for the Hektor. While similar in appearance, the aperture knobs of the Hektor 50mm differ depending on production pe...
-
Condition：
-
95% Mint
-
Summarit 50mm f1.5 Lens Hood XOONS
¥27,000
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Lens hood for Summarit 50mm f1.5, XOONS. Later code 12520. Made of brass with black crinkle finish, showcasing superb craftsmanship. It has a sense of weight and solidity rarely seen in modern industrial products.Not only for the Summarit, but it also fits the Leitz Xenon 50mm.Although it appears rather b...
-
Condition：
-
93% B
-
Leitz Lens Hood 12585
*Shipping to Japan Only.
-
Condition：
-
94% A
-
Nikkor 50mm f1.4 (S) Lens Hood
¥16,000
*Shipping to Japan Only.
-
Condition：
-
97% Like New
-
Rollei 35 Rubber Lens Hood
*Shipping to Japan Only.
-
Condition：
-
95% Mint
-
Xenon 50mm f1.5 Lens Hood XIOOM
Collapsible hood for Xenon 50mm f1.5, XIOOM. This type uses a set screw to secure the hood, a construction also seen on the Summitar hood SOOPD and the Summicron hood SOOFM.While its appearance when mounted is rather imposing, the effectiveness as a hood is outstanding.Leitz code name is XIOOM. The code closely resembles XOOIM, the hood for the first Summilux 50mm f1.4, yet it conveys the linea...
-
Condition：
-
93% B
-
Xenon 50mm f1.5 Lens Hood XIOOM New York Leitz
A folding hood for the Xenon made by New York Leitz. Leitz code XIOOM. Finished in black paint. Since it is a screw-type fastener, this is one of the earlier versions of the XIOOM. The screw itself is chrome.While chrome-finished XIOOM hoods with a side button locking mechanism are occasionally seen, the black paint screw-type is extremely rare. In addition, the fact that the word XENON is engr...
-
Condition：
-
93% B
-
Hektor 28mm f6.3 Lens Hood SOOHN
Lens hood for Hektor 2.8cm f6.3. Leitz product code SOOHN. Retaining screw in chrome. Made by Leitz Germany. Slip-on type for 36mm.A clean and simple trumpet-shaped design, this classic hood enhances the look of your camera and lens. Beyond its function as a hood, it greatly improves the overall appearance.There is also a version made by N.Y. Leitz, but the German-made example stands out for it...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
This is a genuine Leica lens hood made for the earliest version of the Summilux 35mm f1.4, commonly known as the Steel Rim. The earlier designation was OLLUX, but this particular piece is the third version, marked 12522H. For reference, versions 1 and 2 are engraved OLLUX, while the following version 4 is marked 12522.The beloved first-generation spherical Summilux 35mm f1.4, affectionately kno...
-
Condition：
-
97% Like New
-
Leitz VIDOM Finder VIOOH + TUVOO
Leitz upright viewfinder VIOOH, black/chrome finish. A standard Leitz viewfinder produced over a long period from around 1938 to 1964. Features frame selection for 35/50/85/90/135mm. Parallax correction is marked in meters. When you change the focal length while looking through it, the frame narrows dramatically, giving it a distinctly cyber-like feel.This example comes with the rare 28mm attac...
-
Condition：
-
94% A
-
Leitz Lens Hood 12585
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Leitz 12585 lens hood. This genuine hood was supplied during the era of the 2nd generation Summicron 50mm and 35mm, serving as the successor to the ITDOO and IROOA hoods.It is a standard hood compatible with many E39 diameter lenses, including the Summicron 35mm f2 and 50mm f2, as well as the Summaron and...
-
Condition：
-
96% Mint
-
Alpa Macro-Switar 50mm f1.9 Lens Hood
Genuine lens hood for the Alpa Macro-Switar 50mm f1.9. Alpa product code OMXABE / 72302. Naturally, it can also be used with the Macro-Switar f1.8. Made of aluminum with a solid build.Increasingly becoming a rare item, this hood for the Macro-Switar f1.9 is unused and comes with its original box. It is so pristine that it feels almost impossible to use.An exceptionally hard-to-find condition.A ...
-
Condition：
-
97% Like New
-
Leitz Lens Hood ITDOO
Leitz lens hood, ITDOO. A classic hood for the Summicron 50mm and Summaron 35mm lenses, featuring a single hook mount. Compared to its successor, the IROOA, the ITDOO has a cleaner, more stylish design. A beautifully minimal accessory, showcasing the excellence of Leitz craftsmanship.There are several variations of the ITDOO, and this one is the standard type with lens names engraved. In the ea...
-
Condition：
-
94% A
-
Nikkor 50mm f1.1 (S) Lens Hood
Genuine lens hood for the Nikkor-N 50mm f1.1. Made of plastic. Designed for the Nikon S series.It is said that the hood for the Leica L mount version of the same lens was made of metal.Screw-in type with 62mm thread.Far rarer than the lens itself, this is a highly scarce hood.There are slight scuffs on the outer surface of the hood, but no cracks or damage. It has been confirmed to fit the Nikk...
-
Condition：
-
93% B
-
Nikkor 28mm f3.5 Lens Hood Black
Later-type lens hood for the Nikkor 28mm f3.5 in Nikon S mount. This version features a two-tone finish with black paint and glossy chrome plating, designed to match the later black-bodied lens, in contrast to the earlier chrome-finished hood. Screw-in type with a two-piece structure that allows a Series 7 filter to be inserted between the components. It has an exceptionally high-quality and re...
-
Condition：
-
93% B
-
Nikkor 50mm f1.4 (L) Lens Hood
¥63,000
Lens hood for Nikkor 50mm f1.4, compatible with both Leica screw mount and Nikon S mount. Features a 43mm diameter and a two-piece screw-in design, model AN-43mm. While the early versions were made of aluminum, this particular item is the final version, made of brass with black paint finish.A Series 7 filter can be inserted between the hood and its base.In addition to the Nikkor 50mm f1.4, it a...
-
Condition：
-
97% Like New
-
Nikkor 35mm f1.8 (L) Lens Hood
Dedicated lens hood for the W-Nikkor 35mm f1.8 in Leica screw mount. Made of plastic.It has a different filter thread from the hood for the Nikkor 35mm f1.8 in Nikon S mount, so they are not compatible.The 35mm f1.8 lens for L mount itself is already quite rare and hard to find, but this plastic hood is even rarer and seldom seen on the market.It features a square-shaped plastic design, and the...
-
Condition：
-
94% A
-
Summaron 28mm f5.6 Lens Hood SOOBK
Lens hood for the Red Scale Summaron 28mm f5.6. Leica product code is SOOBK, later changed to 12500Y. A36 slip-on hood.A finely crafted hood with a wrinkle black enamel finish. Though expensive, its compact yet commanding presence when mounted on the Red Summaron makes it highly desirable and satisfying to own.A must-have item for those who own the Red Summaron. The real question is, which came...
-
Condition：
-
94% A
-
Leitz Lens Hood OLLUX
¥220,000
Lens hood specifically designed for the Summilux 35mm f1.4 1st version, commonly known as the Steel Rim. This hood is called OLLUX, with a later product code of 12522H. This particular piece is the earlier version engraved with OLLUX, which was later renamed to 12522. Moreover, it is the second variation among the OLLUX-marked hoods, featuring engraved arrows on both sides.With its stylish desi...
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH Black
A black paint version of the FOOKH lens hood, designed for Summaron 35mm, Elmar 35mm, and similar lenses. It features a chrome retaining screw and fits 36mm slip-on mounts.Though simple in design, the hood has an exceptionally well-balanced shape that complements both nickel and chrome lenses. Many users also use it with Elmar 50mm lenses.A similar hood is the earlier FLQOO, made for the first-...
-
Condition：
-
92% BC
-
Leitz Lens Hood FLQOO N.Y. Leitz
FLQOO lens hood made by Leitz New York. Black paint finish on brass with chrome screw. A36 size.Dimensions are nearly identical to the German-made FLQOO, but the engraving marking it for the Elmar 50mm is perhaps the most notable difference.It can also be used with the Elmar 35mm and Summaron 35mm lenses, not just the Elmar 50mm.Compared to the original German FLQOO, the front rim is thinner, a...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
Dedicated hood for the legendary Summilux 35mm f1.4 1st, commonly known as the Steel Rim. This hood is renowned not only for its function but also for its elegant appearance when mounted. Leica product code is OLLUX, and the later code is 12522H. Often referred to as Ollux in the collector community.This item is the early version with the OLLUX engraving (later versions are marked 12522H), spec...
-
Condition：
-
95% Mint
-
Nikkor 35mm f2.5 (S)
Wide-angle lens for Nikon S series, the W-Nikkor 35mm f2.5, later version with an aluminum barrel. Among the late models, this one has already lost the letter C from the Nikkor engraving. It comes just before the final version that featured a revised aperture ring. Starting around 1956, the lens adopted a lighter aluminum body with a beautiful black finish.It has a 4-group, 6-element double Gau...
-
Condition：
-
94% A
-
Leitz Lens Hood IWKOO
Super-Angulon 21mm f4 lens hood. Leica product code is IWKOO / 12502N.This is the later version engraved with 12502N.A beautifully designed hood that looks excellent when mounted on the lens.The item shows only the slightest signs of use and has an exceptionally clean appearance.The black-painted hood section has a small spot of paint loss at the tip, but overall it is in barely used condition....
-
Condition：
-
95% Mint
-
Voigtlander Lens Hood 32mm
¥6,500
*Shipping to Japan Only. For overseas customer, please contact us before order.After Voigtländer was absorbed by Zeiss, this lens hood was sold under their brand.The original box bears the Zeiss part number 20.5710, while the hood itself is engraved with Voigtländer’s former part number 310/32.The hood is an original Voigtländer product from that era, a 32mm slip-on type.It is designed for the ...
-
Condition：
-
99% Like New
-
Zeiss Lens Hood 40.5mm for Contax
¥15,000
*Shipping to Japan Only. For overseas customer, please conact us before order.
-
Condition：
-
93% B
-
Rollei Lens Hood (RII)
*Shipping to Japan only. For overseas customer, please contact us before order.Genuine lens hood for the Rolleiflex 3.5F series. Commonly known as Bayonet 2 or Bay2.There are minor scuff marks on the mounting surface from attachment, but the hood shows no signs of paint loss and remains in very clean condition.The included leather case is also in excellent condition.The price includes shipping.
-
Condition：
-
94% A
-
FB-07 Flashback Lens Hood 銀漆 for Elmar 50mm
*Shipping to Japan only. For overseas customers, please contact us before placing an order.FB-07 Custom Lens Hood for Elmar (A36) – Silver Screw Version.This is our original lens hood, designed specifically for A36-mount Elmar 50mm lenses. This particular item is a gently used unit with minimal signs of wear. The retaining screw features the silver lacquer version.A truly unique hood with integ...
-
Condition：
-
93% B
-
FB-08 真鍮黒染 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw painted in black. Black oxide finish. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
FB-08 真鍮素地 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw wtih no paint. Bare brass. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
FB-08 銀漆 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw lacquered in silver. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
Leitz Lens Hood FIKUS
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica’s zoom lens hood for 35/50/90/135mm lenses — the FIKUS. Designed for 36mm slip-on mounts (A36). This version features the earlier, simpler engraving style up to Elmar 5cm. While unmarked, when the outer hood is fully retracted, it can also accommodate the Elmar 35mm and Hektor 50mm lenses.The FIKUS hood was int...
-
Condition：
-
93% B
-
Cook & Perkins Hood for Elmar 50mm f3.5
Rare lens hood from Cook&Perkins, England. Fits with screw stopper. Move the apature ring with this hood. Light weight, made of aluminum. Very good condition for use and also collection! *The camera and lens are not included.
-
Condition：
-
93% B
-
Cook & Perkins Hood for Elmar 50mm f3.5
Rare lens hood from Cook&Perkins, England. Fits with screw stopper. Move the apature ring with this hood. Light weight, made of aluminum. No dents. Very good condition. Good for collection.
-
Condition：
-
94% A
-
Cook & Perkins Hood for Elmar 50mm f3.5
Cook & Perkins' lens hood for Elmar 50mm f3.5 prewar model. F numbers are f3.5, 4.5, 6.3, 9, 12.5, 18.Made of aluminium and very light. Very attractive accessory. Rare item.Very used condition. No dents. Looks like used Angenieux lens.Good working condition. Comes with protection filter inside.
-
Condition：
-
91% BC
-
Cook & Perkins Hood for Elmar 50mm f3.5
Cook & Perkins' lens hood for Elmar 50mm f3.5 prewar model. F numbers are f3.5, 4.5, 6.3, 9, 12.5, 18.Made of aluminium and very light. Very attractive accessory. Rare item.Very used condition. No dents. Looks like used Angenieux lens.Good working condition. Comes with protection filter inside.The stopper screw was replaced to Nickel and it probably not genuine parts.
-
Condition：
-
91% C
- Choosing a selection results in a full page refresh.
- Opens in a new window.
