Skip to content
Leica
-
Hektor 28mm f6.3 Lens Hood SOOHN
Lens hood for Hektor 2.8cm f6.3 Leitz product code: SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on type.The sleek and simple trumpet-shaped design of this classic hood will enhance the look of your camera and lens. Beyond its practical benefits as a hood, it adds a striking and stylish appearance.By the way, while there is also a N.Y. Leitz version of the SOOHN hoo...
-
Condition：
-
93% B
-
Leitz VIDOM Finder VISET
Leitz's first universal finder, introduced in 1931. This is an early model without built-in parallax correction. In Europe and America, it is also referred to as the Torpedo Viewfinder.There are 15 different variations based on the frame types displayed. This particular unit is a VISET/VISIL with frames for 35/50/90/135mm, finished in black paint.The finder shows a reversed image, and rotating ...
-
Condition：
-
93% B
-
Leitz Rangefinder FODIS Black
Leitz vertical rangefinder, FODIS.This is the early model with a small distance dial and a 5-digit serial number. It is believed to have been manufactured in the late 1920s.The rangefinder features a black and nickel finish, with distance markings in feet. With a baseline length of 83mm, it provides quite accurate measurements, with a minimum measuring distance of 3 feet.This vintage standalone...
-
Condition：
-
93% B
-
Hektor 73mm f1.9 Yellow FIlter FIREG
*Shipping to Japan Only.Genuine Yellow Filter for Hektor 73mm f1.9. Leitz Product Code FIREG. 39mm Screw-in Type. Black Rim.Manufactured around 1933. Yellow filters come in four levels of density, and this one is marked No.1, indicating the second-lightest yellow.While slip-on filters are common for the Hektor 73mm, screw-in types are rare. This filter is also compatible with other E39 mount le...
-
Condition：
-
94% A
-
Leitz 21mm Finder SBKOO Black
Leitz 21mm finder, SBKOO. Later code 12002. Black chrome finish. Suitable for Super-Angulon 21mm and Elmarit 21mm lenses. This is an ultra-wide-angle viewfinder with a bright frame, offering a bright and easy-to-see view.There is some evidence of use, such as wear on the black chrome at the corners and a small scratch on the eyepiece, but it's in good, practical condition. The glass was profess...
-
Condition：
-
92% B
-
Leitz SOOKY-M
*Shipping to Japan Only.Leica M-series close-up attachment. The product codes are SOOKY-M or SOMKY, later changed to 16507.This accessory allows for close-ups from approximately 1m to 0.5m when used with the collapsible Summicron 50mm f2 or the Elmar 50mm f2.8 lenses. When using regid Summicron, you need to remove the lens head and insert the UOORF/16508 adapter in between.Although it was origi...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Black
*Shipping to Japan only.Elmar 50mm f3.5 Hood. Early type of FISON without retaining screw. It is from an era when the hood was made in one piece. This is likely the model following the very first FISON, which required repositioning every time the shooting distance was changed due to its rectangular shape. Made of brass with black paint.The hood measures 20mm in total length and lacks markings s...
-
Condition：
-
92% B
-
Summarit 50mm f1.5 Skylight Filter
*Shipping to Japan only.A clip-on original Skylight filter compatible with the early version of the Summarit 50mm f1.5, as well as its predecessor, the Xenon 50mm f1.5. Made by Leitz New York.This filter can be used with the original XOONS lens hood while attached. The interior is lined with velvet, showcasing a refined design.The price includes domestic shipping.The chrome-plated filter frame ...
-
Condition：
-
93% B
-
Leitz Extention Ring 16469Y
*Shipping in Japan Only.Leica M-mount close-up (extension) ring. Product code: OUFRO / 16469. Originally designed for the Visoflex, but since it has Leica M-mounts on both sides, it can also be used with live-view cameras and mirrorless systems. It’s a very well-built item, as expected from a genuine Leitz product. While it doesn’t couple with the rangefinder, it allows for quite close focusing...
-
Condition：
-
92% B
-
Leitz MR Ring 14167
¥14,000
*Shipping to Japan Only.An adapter for mounting Visoflex lenses on Leica R bodies. It allows you to enjoy a wide range of Visoflex lenses on Leica R-type cameras.Minimal signs of use, in clean condition.The price includes consumption tax and domestic shipping.
-
Condition：
-
94% A
-
Leitz UVa Filter E60 13381
*Shipping to Japan Only.Leitz E60 UVa filter. Product code: 13381. It is compatible with lenses with a 60mm diameter, including the Noctilux 50mm f1 and Macro-Elmarit-R 60mm.In excellent condition with no signs of use; it appears to be almost unused. Comes with the original case and box. The Leitz branding is a key feature, making it ideal for those who value period accuracy.The price includes ...
-
Condition：
-
96% Mint
-
Summicron 50mm f2 Lens Hood SOOFM
*Shipping to Japan Only.Leitz-made folding lens hood for the Summicron 50mm.This type of folding hood originated with the Xenon 50mm f1.5, and later was used for the Summitar and then became compatible with both Summitar and Summicron with the advent of the Summicron. It was exclusively used for the Summicron after the retirement of the Summitar. Knowing this history, one can truly appreciate i...
-
Condition：
-
91% C
-
Leitz Rangefinder FODIS Black
FODIS rangefinder. A standalone rangefinder from Leitz, this early model features a small dial and is believed to have been manufactured in the late 1920s. It comes in black and nickel, with feet markings. The baseline length is 83mm, and the minimum measuring distance is 3 feet. The hexagonal logo, D.R.P. text, and various engravings are beautifully finished with silver inlay. The serial numbe...
-
Condition：
-
92% B
-
Rayqual Mount Adapter LR - LM
*Shipping to Japan Only.Rayqual Mount Adapter LR-LM V3.This adapter converts Leica R lenses to Leica M mount. You can enjoy legendary lenses such as the Summilux-R 35mm, 80mm, and Summicron-R on digital Leica M cameras. Note that it is not coupled with the rangefinder.Made by Miyamoto Seisakusho in Nerima, Tokyo. It offers reliable domestic design and manufacturing with a reputation for stable ...
-
Condition：
-
94% A
-
Leitz Tripod Head KGOON
*Shipping to Japan Only.Leitz medium-sized ball head. A universal type that supports both large and small screws on both male and female ends, marked with the D stamp as proof—hence the nickname D Head.This brilliant mechanism automatically switches between standard and smaller thread sizes with a spring-loaded adjustment when different sizes of equipment are attached. It’s a prime example of L...
-
Condition：
-
91% C
-
Leicavit M Black Paint
Leicavit M Black Paint. This rapid wind lever was supplied for the Leica MP6, with the product code 14009 from Leitz. It's a genuine Japanese Siebel-Hegner product.Compatible with Leica M6, M6TTL, M7, MP, M4-P, and M4-2. It is used by replacing the original bottom cover. The lever features a trigger built into the bottom that allows you to complete the winding simply by pulling and engaging the...
-
Condition：
-
94% A
-
Leitz Lens hood IROOA
*Shipping to Japan only. For overseas customer, please contact us before order.The classic Leica lens hood, IROOA. Double hook design. The later product code is 12571J. Suitable for E39 (39mm screw-in) lenses.Like other Leica hoods, the IROOA comes in various versions. This one is an early model with a shorter hood height and features engravings for six compatible lenses. It is one of the most ...
-
Condition：
-
95% Mint
-
Leica Body Cap Black
*Shipping to Japan Only.Genuine Leitz body cap. The body cap code numbers are IVZOO, later changed to 14056.This is a brass cap with a sleek black lacquer finish, suitable for use with black-painted bodies. While there are many variations of these black lacquered caps, this is a standard type among them. Nonetheless, it remains a rare cap.Mounted and verified on the body. Price includes domesti...
-
Condition：
-
93% B
-
Leitz UVa Filter E60 13381
*Shipping to Japan only.13381. Leitz UVa Filter. E60. 60mm screw-in. Suitable for lenses such as the Noctilux E60 and Summilux 75mm f1.4. The filter frame is engraved with Leitz. Comes with the original box for those who are particular about Leitz.The filter frame and glass are in the same condition as when new. There are no signs of use on the filter threads. The price includes domestic shipping.
-
Condition：
-
98% Like New
-
Leitz Lens Hood IUFOO
*Shipping to Japan Only.The Leitz E39 screw-mount lens hood, IUFOO/12575, is compatible with medium telephoto lenses such as the Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.This piece is a single-hook model, whereas later versions feature a double-hook design. It was produced for a long time with various shapes and engravings. This specific ex...
-
Condition：
-
93% B
-
Leicavit MP Black Paint
Leica Bit MP Black Paint. Leica code SYOOM-M, SMYOM, or 14018.This is a film winding mechanism compatible with Leica M2, M1, MD, and Leica MP. This particular unit is a rare original black paint version.It is an early model with three-line engravings on the back. The sight of it mounted on a Leica M2 Black Paint or similar always captivates.There is a very minor dent on one corner of the bottom...
-
Condition：
-
93% B
-
Summicron 50mm f2 Lens Hood VTROO
*Shipping to Japan Only.A lens hood for the rigid Summicron (both early and late versions) for enlarging purposes, introduced in 1956. The Leitz product code is VTROO, later updated to 16686. Although not its original purpose, it can also be used as a hood with aperture control functionality, similar to the VALOO for the Elmar 50mm.(Installation Instructions)1. Insert the two protruding parts o...
-
Condition：
-
93% B
-
Leitz A36 山高 Cap Black
A cap that covers the Elmar 50mm f3.5 with a 36mm diameter filter attached.This item is made of brass with black paint and features velvet on the back. It is quite hard to find.Considering it has been over 90 years since its manufacture, it is in remarkably good condition.There is minor deterioration of the paint due to aging, but there is almost no noticeable wear from use. The velvet on the b...
-
Condition：
-
94% A
-
Leitz Yellow Filter E41
*Shipping to Japan only. XOOQG. The later code is 13160. E41 diameter Yellow Filter No.1.Originally for the Summarit 50mm f1.5, it is also compatible with the Xenon 50mm f1.5 and the first-generation Summilux 35mm f1.4 Steel Rim.Price includes domestic shipping.The glass has a few very faint cleaning marks. The filter frame shows almost no signs of use and is in good condition. It comes with th...
-
Condition：
-
95% Mint
-
Leitz Sports Finder RASAL Black
eitz Sports Finder RASAL. This is a black paint version. It comes with frames for 35mm, 50mm, 73mm, 90mm, and 105mm. The objective section features a rotating axis that allows you to change the focal length, showcasing its superb craftsmanship. By adjusting the height of the eyepiece, it also accommodates parallax correction. Distance scale is in feet.The RASAL finder is composed of two parts: ...
-
Condition：
-
94% A
-
Leitz Lens Hood FIKUS Nickel
Leica Zoom Hood for 35/50/90/135mm, FIKUS. Rare nickel-plated finish. 36mm slip-on. This item features engravings for both Hektor and Summar.When the outer hood is fully retracted, it is compatible with the Elmar 35mm f3.5.The Ernst Leitz Wetzlar engraving is inlaid in silver. There is also a Germany engraving.The matte paint on the inside of the hood shows some signs of use, but otherwise, the...
-
Condition：
-
93% A
-
Leitz UVa Filter E41
*Shipping to Japan only.
-
Condition：
-
94% A
-
Leitz Green Filter E43
*Shipping to Japan only. For overseas customer, please contact us before order.A green filter for the Summilux 50mm f1.4. Specifically designed to be thin to avoid interference when the XOOIM or 12521G hood is attached. Price includes domestic shipping.Both the glass and filter frame are in excellent condition.
-
Condition：
-
95% Mint
-
Leitz SL Filter E39 New York
*Shipping to Japan Only.
-
Condition：
-
94% A
-
Leitz Tripod Head KGOON
¥18,000
The medium-sized ball head by Leitz, product code KGOON, later changed to 14115, with the E. Leitz hexagon logo. Both the male and female sides have a small screw.This model has been manufactured since 1936, with changes made over time. This particular piece is the fourth version, which has an added horizontal bar under the base for finger support, making it easier to attach the camera.It can b...
-
Condition：
-
92% C
-
Leitz VIDOM Finder VIOOH
Leitz's right-angle VIDOM viewfinder, VIOOH. Black/chrome. It was produced for a long period from around 1938 to 1964.It features frame switching for 35/50/85/90/135mm focal lengths. As you change the focal length while looking through it, the frame narrows in a very cyber and cool manner. Parallax correction is marked in feet.This is a clean right-angle VIDOM in terms of both appearance and gl...
-
Condition：
-
93% B
-
Leitz VIDOM Finder VIOOH
¥19,000
Leitz's right-angle VIOOH viewfinder. Black/chrome. It was produced for a long time from around 1938 to 1964.It has frame switching for 35/50/85/90/135mm focal lengths. As you change the focal length while looking through it, the frame narrows in a very cyber and cool manner. Parallax correction is marked in meters.There are small hand-engraved characters under the shoe mount. Although there ar...
-
Condition：
-
93% B
-
Leitz UVa Filter E43
Chrome-finished UVa filter for Summilux 50mm f/1.4. A perfect match for a noble lady. The Leitz code is YMZOO, later 13206. It has the ERNST LEITZ WETZLAR engraving and red-lettered U.V.a. engraving. With a diameter of E43, it is a 43mm screw-in filter. It is compatible with the spherical Summilux 50mm f/1.4. Specifically designed to be extremely thin, this filter is necessary when attaching th...
-
Condition：
-
93% B
-
Leitz Filter Adapter SOOGZ
Leitz filter adapter ring. It allows mounting an E39 filter onto an A36 lens. Leitz product code: SOOGZ / 13154. It features a charming design with screws protruding unexpectedly.Specifically, it enables A36 lenses such as Elmar 50mm f3.5, Hektor 50mm f2.5, Summar 50mm f2, Summaron 35mm f3.5, Elmar 35mm f3.5, and others with an outer diameter of 36mm (A36) to use E39 filters with an inner diame...
-
Condition：
-
95% Mint
-
Leitz Close-up Attachment ADVOO
Close-up Attachment for Leica IIIg, ADVOO. Later product code is 16503. Introduced in 1959.The Leica IIIg, the last model of the Barnack Leica series, has a taller body compared to previous models like the IIIf, making SOOKY and NOOKY unusable. This ADVOO attachment is a luxurious tool created solely for the IIIg, showcasing the opulence typical of Leitz. Manufactured during the golden age of p...
-
Condition：
-
95% Mint
-
Leitz Lens Hood 12585H
Leitz 12585H lens hood. This is the genuine hood from the second generation of Summicron 35mm and 50mm lenses, fitting most E39 diameter lenses. It succeeded the IROOA hood.It's a classic hood that can be used with lenses like the Summicron 35mm f2, 50mm f2, and others, including Summaron and Elmar lenses. This specific hood is a later type marked for the 35/2 lens.*Shipping to Japan Only. For ...
-
Condition：
-
93% B
-
Leitz Rangefinder FODIS Black
Vertical rangefinder by Leitz, product cord is FODIS. This is an early type with a small distance dial, finished in black/nickel and marked in meters. It features a five-digit serial number, dating back to the 1920s.With a baseline length of 83mm, it provides quite accurate measurements. The minimum measuring distance is 1m, same to internal rangefinders from the DII era onwards.Standing tall o...
-
Condition：
-
93% B
-
Leitz A36 山高 Cap Chrome
Leitz geninue A36 lens cap. This item is made of brass with a shiny chrome-plated finish. Does not have velvet lining on the inside of the cap. It is especially useful when small diameter filters are attached to the 36mm Elmar 50mm f3.5 or the Hektor 50mm f2.5 lenses. This cap is quite hard to come by.It is an extremely clean cap with hardly any signs of wear or scratches. Of course, there is ...
-
Condition：
-
94% A
-
Leitz Series 6 UVa Filter
*Shipping to Japan Only.Leitz Series VI (Series 6) UVa filter, product code 13012 by Leitz. Comes in its original red box. It's in excellent condition!
-
Condition：
-
95% Mint
-
Leitz A36 Filter
A screw-in type Leitz filter with an A36 diameter, suitable for lenses from the late 1920s to early 1930s. The filter frame is black-painted, split into two parts for inserting the filter between them, without retaining screws. There is an 'R' engraving on the side of the filter frame, indicating it was originally for a red filter, but it has been replaced with a clear, non-coated protective fi...
-
Condition：
-
94% A
-
Leica M3 Case
Leitz original leather case from the era of the late Leica M3 and M2. The Leitz code name is IDCOO. The tripod screw is a fine thread. The "LEITZ WETZLAR GERMANY" stamp is in uppercase letters.Made from high-quality leather, it still retains its original luster even after nearly 60 years since its manufacture. It's remarkable that it has remained in such condition!While there are very minor wri...
-
Condition：
-
93% AB
-
Leitz Lens Hood FLQOO Black
Hood for Elmar 35mm f3.5, FLQOO. Slip-on type for A36. Black paint on brass, with a chrome retaining screw. The engraving is not inlaid but filled with white.Although designed for the Elmar 35mm, it can also be used with lenses like the Summaron 35mm. It is a very stylish hood. Its simple design also matches well with lenses like the Elmar 50mm.A rare item.There is a spot on the base of the hoo...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
FLQOO. Hood for Elmar 35mm f3.5. A36. The retaining screw is chrome. The appearance is similar to the successor FOOKH, but the diameter and length are different. Its simple design enhances the look of your lens. As expected from Leitz.This item has an aluminum front end and features rare white paint markings instead of inlaid engravings. Similar models exist from N.Y. Leitz, but this one is mad...
-
Condition：
-
93% B
-
Summaron 28mm f5.6 Lens Hood SOOBK
12500Y. The old Leitz code is SOOBK. Lens hood for Summaron 28mm f5.6 (Red Summaron). A36 slip-on.A splendid hood with crinkle finish. Although it is quite an expensive hood, its appearance when mounted on the Red Summaron is compact yet imposing. For those who own or plan to purchase the Red Summaron, this is a must-have item. Which comes first, the lens or the hood? (LoL)There is some paint ...
-
Condition：
-
93% B
-
Hektor 28mm f6.3 Lens Hood SOOHN
Hood for Hektor 2.8cm f6.3. Leitz product code is SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on.The clean and simple trumpet-shaped design is a masterpiece hood that enhances your camera and lens. For those using the uncoated Hektor 28mm, this is an essential item.The white engravings are well-balanced and, combined with the attractive design, create a beautiful a...
-
Condition：
-
92% BC
-
Leitz Lens Hood OLLUX
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 Early type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.There are minor paint chips observed on the front edges of the hood, but it's in a condition suitable for practical use without any concerns.
-
Condition：
-
92% B
-
Leitz Lens Hood OLLUX
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 Early type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.Slightly used and faint paint peels on edges. Good fitting to Steel Rim.
-
Condition：
-
93% B
-
Leitz Tripod Head FOOMI
FOOMI / 14105. Leitz small-size tripod head. Universal type for both 1/4 and 3/8 tripod thread. Amazingly high quality product. @copy@Faint signs of use found. Good for use. Good working condition.*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
93% B
-
Hektor 73mm f1.9 UV FIlter FIWET
*Shipping to Japan Only. For overseas customer, please contact us before order.Genuine UV filter for Hektor 73mm f1.9, 39mm screw-in type. The Leitz product code is FIWET.This UV filter, from the era of black-and-white photography, has a strong yellow tint and is not suitable for color photography. For color, please use the later UVa filters.Additionally, there is also a slip-on type UV filter ...
-
Condition：
-
92% B
-
Hektor 73mm f1.9 Yellow Filter FIOPY
*Shipping to Japan Only. For overseas customer, please contact us before order.Genuine yellow filter for the Hektor 7.3cm f1.9, with product code FIOPY. It's a slip-on type manufactured around 1933, marked as No.0 and featuring a thin yellow tint.Despite its small size, it's remarkably well-made, with a velvet lining on the back for secure attachment to the lens. It has been confirmed to fit th...
-
Condition：
-
95% Mint
-
Summarit 50mm f1.5 Lens Hood XOONS
Hood for Summilux 50mm f1.5, designated XOONS. It features an impressive construction with brass and black wrinkle paint, providing a substantial feel rarely seen in modern industrial products.This hood can be used not only with the Summilux but also with the Leitz Xenon 50mm lens.While it may appear somewhat grand for a 50mm lens hood, it surprisingly complements the Barnack Leica cameras well...
-
Condition：
-
95% Mint
-
Leitz UVa Filter E41
*Shipping to Japan Only. For overseas customer, please contact us before order.XOOYL / 13205. E41. For the early version of the Summilux 35mm f1.4 with the steel rim. The OLLUX hood can also be used with it. It is also compatible with the Summarit 50mm f1.5, which has the same 41mm screw-in diameter.Both the frame and glass are in excellent condition. This is a somewhat rare filter that is hard...
-
Condition：
-
95% Mint
-
Leitz UVa Filter E39 Black
*Shipping to Japan Only. For overseas customer, please contact us before order.13131A. Genuine Leitz UVa filter. Black frame, E39 diameter, 39mm screw-in. Marked with "LEITZ WETZLAR GERMANY" in white lettering.Perfect for black-painted Summicron or Summilux lenses. Both the frame and glass are in excellent condition. Comes with the original box.
-
Condition：
-
95% Mint
-
Leitz Lens Hood IROOA
IROOA's early model. Slightly longer hood compared to later models. Later designated as 12571J. Designed for lenses with E39 diameter (39mm screw-in).Initially labeled for Summaron 3.5cm and Summicron 5cm, but also suitable for lenses like the Summicron 35mm f2 (8 elements) and Elmar 50mm f2.8.Compatible with various lenses, this simple and stylish design is a reassuring classic from Leica, the...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON Black
Lens hood for Elmar 50mm, black version of FISON. A36 size.This item is a rare all-aluminum version with black paint. The leaf spring part that attaches to the lens is also made of aluminum. It is very lightweight, weighing approximately 9g. The fastening screw is chrome.The engraving for Elmar 5cm is filled with white paint. A rare item.There is some chipping in the black paint on the leaf spr...
-
Condition：
-
94% A
-
Leitz Tripod head FOOMI
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz product code is FOOMI, later 14105. A compact ball head made by Leitz. Both the male and female threads are the larger type (a fine-thread adapter is included for the tripod side).Following the first compact ball head FIAKU, the product code was changed to FOOMI in 1938, and multiple variations appeared. This p...
-
Condition：
-
92% B
-
Leitz Adapter OUBIO
*Shipping to Japan Only. For overseas customer, please contact us before order.Intermediate Ring for Visoflex, OUBIO. Later code is 16466. This intermediate ring is used to attach Hektor 125mm, Elmar 135mm, Telyt 200mm, 280mm, and 400mm lenses to the Visoflex body. The black crinkle finish is beautiful, showcasing the excellent craftsmanship characteristic of Leitz products.It shows almost no s...
-
Condition：
-
98% Like New
-
Leitz Lens Hood VALOO
The product code from Leitz is VALOO, later designated as 16620. Introduced in 1949, this is a hood originally designed for enlarging purposes, intended to improve aperture control when used with lenses like the Elmar 50mm on enlargers such as Valoy or Focomat, and focusing stages.In practice, it is also usable as a shooting hood, primarily employed today as a hood for the Elmar 50mm lens. Weig...
-
Condition：
-
95% Mint
-
Leitz Rangefinder HFOOK Black / Nickel
HFOOK. Rangefinder with shoe attachment. This model is a standalone rangefinder FOKOS by Leitz with an added movable shoe FOKAB. Black/nickel finish. The distance dial is in meters. The baseline length is 75mm. The minimum focusing distance is 0.75 meters. It is used by attaching it to the accessory shoe.The distance markings are finely graduated. When operating the shutter dial, the rangefinde...
-
Condition：
-
93% B
-
Leica R - Alpa Adapter Leibag
*Shipping to Japan Only. For overseas customer, please contact us before order.Leibag. This adapter converts Leica R-mount lenses to Alpa mount. It is an original Alpa product with manual aperture control.While some may question the necessity of using R lenses on an Alpa camera, there are certainly those who are looking for this option. This adapter is somewhat rare.There are slight scuffs, but...
-
Condition：
-
93% B
- Choosing a selection results in a full page refresh.
- Opens in a new window.
