Skip to content
Leica
-
Hektor 28mm f6.3 Lens Hood SOOHN New York
SOOHN Hood for the Hektor 28mm Lens, made by Leitz New York. The retaining screw is chrome, and the construction differs slightly from the original Wetzlar-made version. While the interior of the hood is matte-coated, it lacks the fine ribbed texture of the German version, instead featuring a somewhat rounded finish that gives it a heavier, more handcrafted feel.Leitz New York versions of the S...
-
Condition：
-
93% B
-
Leica A Set Case ETRIN
¥45,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leather Set Case for Leica Model A.Designed to hold a Leica Model A body, FODIS rangefinder, and two film magazines.Leitz product code: ETRIN. Likely manufactured in the late 1920s to early 1930s. Overall, it is in remarkably clean condition.The ETRIN case has been available since the early days of the Leica A-type, ...
-
Condition：
-
93% B
-
Leitz Self Timer APDOO
*Shipping to Japan Only. For overseas customer, please contact us before order.Self-timer for Barnack Leica. Product code is APDOO, with the later code being 14003. Available in black/chrome finish. Manufactured from 1938 to around 1965. This particular unit is a late post-war model with a chrome dial and black-painted markings.To use, remove the shutter release button from the Leica, screw in ...
-
Condition：
-
93% B
-
Leitz UV Filter A36 FIOLA Black
Leitz-made UV filter. A Slip-on type for A36 lenses. The Leitz product code is FIOLA. The filter frame is black-painted, with a chrome retaining screw. It suits both nickel and chrome lenses. As a UV filter designed for monochrome photography in the past, it has a faint yellow tint. The original box is engraved with 2.8 - 3.5 - 5 - 9 - 13.5cm. It fits a wide range of lenses, including the Elmar...
-
Condition：
-
94% A
-
Leitz Lens Hood FISON Early
Early model of the FISON hood for the Leica A-type, specifically the rectangular type. It likely dates from the era of lenses such as the Leica Anastigmat, Elmax, and the early Elmar 50mm f3.5. The hood has a 36mm slip-on fitting and is molded as a single piece without any logos or engravings from Leica.The hood's base features a step, which indicates it is a later version of the rectangular-ty...
-
Condition：
-
90% C
-
Leitz Lens Hood FISON Black
¥43,000
Elmar 50mm lens hood, black version of the FISON. A36 size.This rare version is made entirely of aluminum, with a black paint finish. The spring-loaded part that attaches to the lens is also made of aluminum. It weighs only about 9.7g, making it exceptionally lightweight. The retaining screw is made of brass with chrome plating.The engraving is simple, with "E.Leitz Wetzlar" on the base and "El...
-
Condition：
-
94% A
-
Leitz Lens Hood ITDOO
¥21,000
*Shipping to Japan Only.The classic Leica lens hood, ITDOO.Designed for lenses with an E39 thread, such as the Summicron 35mm/50mm, Summaron 35mm, and Elmar 50mm. Featuring a single hook attachment system, the ITDOO offers a more streamlined appearance when mounted on a lens compared to the later IROOA, making it a preferred choice for some enthusiasts. Its minimalist design exudes a sense of f...
-
Condition：
-
90% C
-
Leitz L/M Adapter 50mm
*Shiping to Japan Only.IRZOO, later known as 14097, is a genuine Leitz adapter for 50mm lenses.When attached to an M-type Leica, it displays 50mm and 75mm viewfinder frames. As a genuine accessory, it offers reliability and compatibility. This model features a cutout design, ensuring it does not interfere with the infinity lock.There are faint scuff marks, but no noticeable scratches, dents, or...
-
Condition：
-
93% B
-
Leicavit for Leica IIIf / IIIg SYOOM
The Leica IIIf and IIIg Leica Bit, SYOOM. By pulling the trigger, you can quickly wind the film. This is faster than winding it with the knob on the camera body, allowing you to keep your eye on the viewfinder and capture the perfect moment without losing focus. A popular item among journalists in the past. At first glance, it may just look like a rod with the Leica engraving, but once attached...
-
Condition：
-
92% B
-
Leitz Sprit Level DOOLU Black
A Leitz-made spirit level introduced in 1929. The product code is DOOLU, with the earlier code being FIBLA. Finished in black paint, it mounts onto the accessory shoe of a Leica camera. This tiny gem boasts exceptional craftsmanship and precision, making it a joy to admire even as a standalone piece. Among Leica accessories, it’s one of the smallest ever produced. Practicality aside, sliding ...
-
Condition：
-
93% B
-
Leitz UVa Filter A36 FIOLA
*Shipping to Japan only. For overseas customer, please contact us before order.Leitz 36mm slip-on UVa filter from the post-war era. The Leitz codes are FIOLA or 13055. The UVa engraving is in red letters, making it a classic item.It is compatible with vintage Leitz lenses with an A36 diameter, including the Hektor 28mm, Summaron 35mm f3.5, Summar 50mm f2, Elmar 50mm f3.5, Elmar 90mm f4, Hektor ...
-
Condition：
-
94% A
-
Leica R-Adapter M 22228
An adapter for converting Leica R-mount lenses to Leica M-mount. Product code: 22228. Please note that rangefinder coupling is not supported, so this adapter is best suited for shooting with live view. Additionally, lenses with ROM contacts cannot be attached due to the stepped design of the mount, making this adapter compatible only with up to 3-cam lenses. The base of the mount features a r...
-
Condition：
-
96% Mint
-
Leitz 35mm Finder SBLOO
*Ship to Japan Only. For overseas customer, please contact us before order.The Leica SBLOO external 35mm viewfinder is a classic accessory, and this particular unit features the early model with the hexagonal Leitz logo, first released in 1951. Known for its exceptional optical quality, the SBLOO provides a bright and clear view, making it a joy to use.This viewfinder is a perfect match for Bar...
-
Condition：
-
93% B
-
Leitz UVa Filter A36 FIOLA Black
*Shipping to Japan Only. For overseas customer, please contact us before order.FIOLA. A Leica screw-on UVa filter for lenses with an A36 thread. The filter frame is painted black, and the retaining screw is chrome. It is compatible with both nickel and chrome lenses. The filter has been replaced from its original light-colored version to a colorless, transparent one. Non-coated.Compatible with ...
-
Condition：
-
93% B
-
Leitz Lens Hood IROOA
¥22,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica's classic lens hood, IROOA, commonly known as Iroa. The later product code is 12571J. Double-hook design.The IROOA comes in various versions, and this one is the type with six different compatible lenses engraved on it.It is compatible with lenses with a 39mm screw thread (E39). Compatible lenses include the Su...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
Early model hood for the Elmar 35mm f3.5, with the engraving done in three steps and featuring inlaid silver. It is a screw-on style (A36) and is made of brass with a black paint finish. The hood is equipped with rare nickel-plated screws.Though designed for the Elmar 35mm, it has been tested and can also be used with other lenses like the Summaron 35mm, Elmar 50mm, and others. The hood is a st...
-
Condition：
-
91% B
-
Leitz Lens Hood ITOOY
¥16,000
*Shipping to Japan Only. For overseas customer, please contact us before order.A lens hood for the Elmar 50mm f2.8 and f3.5, with an E39 filter thread. The Leitz product code is ITOOY, and it is a later model with double hooks that allow for reverse mounting. The base of the hood is marked with both f2.8 and f3.5 inscriptions. Among Leitz's many beautifully simple lens hoods, this one stands ...
-
Condition：
-
93% B
-
Leitz 85mm Finder SGOOD
¥58,000
*Ship to Japan Only. For overseas customer, please contact us before order.A dedicated finder for Leitz’s fast medium telephoto lens, the Summarex 85mm f1.5. Originally designated with the product code SGOOD, it was later updated to 12020. This finder features a parallax correction mechanism, with distance markings in feet. Its design, finish, optical clarity, and functionality are all of exce...
-
Condition：
-
93% B
-
Leitz 90mm Finder SOOUT
¥17,000
*Shipping to Japan Only. For overseas customer, please contact us before order.The Leitz 90mm Saddle Finder (SOOUT) is a remarkable accessory, introduced in 1943 as the successor to the SEROO folding finder. This model features an Alvarda silver-coated frame, offering sharp contrast and clarity, and includes parallax correction, which helps adjust the viewfinder's framing based on the distance ...
-
Condition：
-
93% B
-
Leitz Tripod TOOUG
¥20,000
*Ship to Japan only. For oversea customers, please contact us before order.Early model of the Leica tabletop tripod, with the product code TOOUG, later changed to 14100. It features the old E.LEITZ logo and uses a fine thread screw for mounting.The tripod body is made from cast aluminum and finished with a beautiful crystal coating. As expected from Leica, it has an exceptionally precise build,...
-
Condition：
-
94% A
-
Leitz Filter Adapter SOOGZ
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz Filter Adapter Ring, SOOGZ / 13154. This accessory allows E39 filters to be mounted on A36 lenses. Its charming design features a small protruding screw, adding a touch of character.Specifically, it enables the use of E39 filters, such as those for the Summicron, on lenses with a 36mm outer diameter (A36), incl...
-
Condition：
-
94% A
-
Thumb Support M11 Black
*Ship to Japan Only. For overseas customer, please contact us before order.Thumb Rest for Leica M11 (Black) Product code: 24030. This accessory attaches to the hot shoe of the Leica M11, enhancing grip and handling. It is particularly effective for improving hold in vertical shooting and reducing camera shake during slow shutter speeds.The finish is designed to match the matte black paint of th...
-
Condition：
-
96% Mint
-
FB-07 真鍮黒染 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*This is our original lens hood for the Elmar, featuring a brass black-dye retaining screw version. A hood with aperture control functionality, which has long been missing in the market, specifically designed for the A36-thread Elmar 50mm. It fits a wide range of Elmars, from the early 1920s versions to the r...
-
Condition：
-
100% Brand New
-
FB-07 銀漆 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback's handmade Elmar 50mm lens hood. When attached to any A36 diameter Elmar, it allows for easy aperture operation without any additional adjustments.This version features retaining screws with silver lacquer. The screws are subtly colored by mixing metal powder into the lacquer, and their refined app...
-
Condition：
-
100% Brand New
-
FB-07 真鍮素地 Elmar 50mm Lens Hood
¥28,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback Camera proudly presents the FB-07 lens hood for the Elmar 50mm f3.5. This model is compatible with the A36 version of the Elmar 50mm and Elmar 35mm lenses.This particular version features retaining screws made from raw brass.While the Leica FISON hood requires cumbersome aperture adjustments, the V...
-
Condition：
-
100% Brand New
-
FB-10 真鍮黒染 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Our store's original FB-10 lens hood for the Hektor 50mm f2.5, featuring aperture control functionality. The retaining screws are blackened brass.Based on the design of the FB-07 Elmar 50mm hood, this has been re-engineered specifically for the Hektor 50mm. To match the varying aperture control mechanisms of...
-
Condition：
-
100% Brand New
-
FB-10 銀漆 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Flashback Camera proudly presents the FB-10 hood for the Hektor 50mm f2.5. When placed on the Hektor, it allows direct control of the aperture.This product features retaining screws with silver lacquer, which deepens in character over time. The subtle accent of the retaining screws, made by mixing metal powd...
-
Condition：
-
100% Brand New
-
FB-10 真鍮素地 Hektor 50mm Lens Hood
¥30,000
*Domestic shipping only. Overseas customers, please contact us before placing an order.*Our store's original Hektor 5cm f2.5 dedicated hood, FB-10. The retaining screw is made of raw brass, allowing you to enjoy the aging process over time. This hood is specially designed for Hektor lens, featuring aperture control functionality.Based on the basic design of the FB-07 Elmar hood, it has been re-...
-
Condition：
-
100% Brand New
-
Leitz Rangefinder FOKOS Chrome
14011. The previous Leitz code was FOKOS. The distance is in meters. The minimum focusing distance is 0.75m.Compared to the previous horizontal rangefinder model HFOOK, the shoe has been removed, and it now features a vertical design similar to early rangefinders like the FODIS. The total length is about 7.5cm, making it significantly shorter than the FODIS, and it fits more neatly when attache...
-
Condition：
-
93% B
-
Leitz SOMKY
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a close-up attachment for Leica M-mount cameras, with product codes SOOKY-M, SOMKY, and later 16507.When attached to a collapsed Summicron 50mm f2 or Elmar 50mm f2.8, it allows close-up shooting from approximately 1 meter to 0.5 meters. For a fixed lens like the Summicron, you need to remove the lens head and...
-
Condition：
-
94% A
-
Leitz Lens Hood SOOFM
¥18,000
A folding lens hood compatible with both the Summitar and Summicron, product code SOOFM.This particular item was manufactured after the Summitar was discontinued and is marked exclusively for the Summicron, but it is fully compatible with the Summitar as well.Please note that the older model, SOOPD, marked only for the Summitar, cannot be used with the Summicron due to the slightly larger front...
-
Condition：
-
94% A
-
Leitz Aperture Ring VOOLA
*Shipping to Japan Only. For overseas customer, please contact us before order.The VOOLA, later known by the code 16621, is designed for the Elmar 50mm f3.5. This convenient ring allows you to operate the aperture while the FISON hood is attached. It was introduced in 1955 and has become a standard accessory for Elmar users. To use the VOOLA, insert it into the FISON hood, align the aperture le...
-
Condition：
-
93% B
-
Rollei UV Filter (RII)
*Shipping to Japan only. For overseas customer, please contact us before order.For Rolleiflex 3.5F and similar models. Bayonet RII. -0.5 A UV filter with a slightly yellow tint, designed for black-and-white photography. The price includes domestic shippingThere are minor scuffs on the filter frame, but both the appearance and the glass are in good condition. It has been confirmed to fit on a Ro...
-
Condition：
-
92% BC
-
Leitz Lens Hood FISON Black
¥43,000
Elmar 50mm Lens Hood, Black Version of FISON. A36 size. This is the second type, following the initial rectangular version, with a one-piece molded design. It has no securing screw. The addition of ribs for strength demonstrates the steady evolution in a short period. The hood features a silver inlaid Leitz Wetzlar engraving and is made of brass.There is some paint loss and slight distortion at...
-
Condition：
-
92% B
-
Hektor 73mm f1.9 Yellow Filter FIOPY
*Shipping to Japan Only. For overseas customer, please contact us before order.The genuine yellow filter for the Hektor 7.3cm f1.9 lens, with the code FIOPY, is a slip-on type, manufactured around 1933. It is marked with "No.0" and is a light yellow variant. The filter frame is made of aluminum, making it extremely lightweight. Although a small accessory, it is exceptionally well-crafted, with ...
-
Condition：
-
94% A
-
Leitz Close-up Attachment ADVOO
¥28,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica IIIg Close-Up Attachment, ADVOO. Later product code 16503. Introduced in 1959.The Leica IIIg, the final model of the Barnack Leica series, featured a taller body compared to earlier models like the IIIf, which made it incompatible with accessories like the SOOKY and NOOKY. This ADVOO attachment was specifically...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FOOKH
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica original 36mm slip-on hood, model FOOKH. Chrome finish. A36 mount.This is the successor to the FLQOO hood for the Elmar 35mm f3.5, featuring a 36mm slip-on design. It is compatible with the Summaron 35mm f3.5, Elmar 35mm f3.5, and similar lenses.Although designed for 35mm lenses, it can also be used with 50mm l...
-
Condition：
-
93% B
-
Leitz Lens Hood IROOA
¥23,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica Standard Lens Hood, IROOA. The later product code is 12571J.This hood is compatible with E39 (39mm screw-in) lenses and features a double-hook design. While there are various versions of the IROOA, this particular one has markings for six compatible lenses.The compatible lenses include the Summicron 35mm f2 (8-...
-
Condition：
-
92% C
-
Leitz Lens hood IROOA
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica Standard Lens Hood, IROOA. The later product code is 12571J. This hood is compatible with E39 (39mm screw-in) lenses and features a double-hook design. While there are various versions of the IROOA, this particular one has a two-stage engraving with markings for four compatible lenses.The compatible lenses incl...
-
Condition：
-
93% B
-
Leitz Lens Hood FOOKH Black
¥70,000
For use with lenses like the Summaron 35mm and Elmar 35mm: the FOOKH black paint hood. It has a chrome retaining screw and a 36mm slip-on fit. Despite its simplicity, it has an exceptionally well-proportioned shape, suiting both nickel and chrome lenses perfectly. Many also use it with the Elmar 50mm. A similar hood, the earlier FLQOO for the Elmar 35mm, exists, but the FOOKH is slightly shorte...
-
Condition：
-
93% B
-
Leitz 50mm Finder SBOOI
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica 50mm viewfinder with product code SBOOI, later designated as 12015. This is a masterpiece from Leitz, brimming with functional simplicity and offering exceptional clarity.This unit is an early version with the "5cm" engraving, featuring a chrome eyepiece. It has a single set screw on the shoe and lacks the knur...
-
Condition：
-
92% B
-
Leitz 35mm Finder SBLOO
The Leica SBLOO external 35mm viewfinder, a classic accessory. This early version, featuring the hexagonal Leitz logo, was released in 1951 with the later code 12010. Renowned for its clarity, this viewfinder offers a bright, vivid field of view, almost as if it reveals details beyond what’s visible through the built-in viewfinder. Perfect for Barnack Leicas or the M3, which lack a 35mm frame, ...
-
Condition：
-
92% B
-
Leitz Lens Hood FIKUS
¥28,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Black/crinkle chrome. A zoom hood with an A36 diameter for 50mm, 90mm, and 135mm lenses. When the outer hood is fully retracted, it can also be used with the Elmar 35mm f3.5.It shows no signs of use and is in beautiful condition. It's hard to believe this is nearly 70 years old, as it appears almost like new. The ori...
-
Condition：
-
97% Like New
-
Leitz Lens Hood VALOO
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz's product code is VALOO, later changed to 16620. It’s an enlarger hood introduced in 1949. Originally designed to improve the aperture operation when using the Elmar 50mm lens on enlargers such as the Valoy or Focomat, or on focusing stages.In practice, it can also be used as a hood for photography, and today i...
-
Condition：
-
92% B
-
Leitz Lens Hood 12585
¥14,000
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
93% B
-
Actina Lens Hood for Summicron 50mm
*Shipping to Japan Only.Lens Hood Made by Schmidt & Co. Under the Actina Brand for Leica Lenses.This lens hood was produced by Schmidt & Co., which was the Leica distributor in Japan. It is compatible with 50mm lenses like the E39-threaded Summicron and Elmar 50mm f2.8, as well as other lenses such as ITDOO and IROOA. It can also be inserted and attached in reverse. Perfect for those looking fo...
-
Condition：
-
92% B
-
Leitz UVa Filter E58 UVOOF
*Shipping to Japan only. For overseas customer, please contact us before order.Leitz product code: UVOOF, later 13270. 58mm screw-in filter. Compatible with lenses such as the Hektor 125mm f2.5, Summarex 85mm f1.5, and Noctilux 50mm f1 E58. Chrome frame. The UVa engraving is in black lettering.There are slight scratches near the UVa engraving, and some shine in the plating, but otherwise, the e...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
¥295,000
This is the original hood for the early version of the Summilux 35mm f1.4, commonly known as the Steel Rim. The previous code was OLLUX. This particular item is version 3, designated as 12522H. For reference, versions 1 and 2 are marked as OLLUX, while version 4 is labeled as 12522.The beloved Steel Rim spherical Summilux 35mm f1.4 was introduced at the 1960 Photokina as the world's brightest w...
-
Condition：
-
96% Mint
-
Leitz Lens Hood FISON Black
¥39,000
Lens hood for the Elmar 50mm, FISON. Black version. A36 size slip-ion type.This item is a rare all-aluminum version with black paint. The spring plate that attaches to the lens is also made of aluminum. It is very lightweight, weighing approximately 9.6g. The set screw is chrome plated.The rear side has a Germany engraving. According to Flashback’s own criteria (lol), the more characters, the c...
-
Condition：
-
92% B
-
Leitz Rangefinder FOKOS Chrome
*Shipping to Japan Only. For overseas customer, please contact us before order.The Leitz vertical rangefinder FOKOS. This is a late model produced after the war, from 1949 onwards. Among these, it appears to be the final version, where the Leitz hexagonal logo is engraved facing upwards. The product code is FOKOS, later referred to as 14011. The distance scale is in meters.Compared to the horiz...
-
Condition：
-
93% B
-
Leitz Lens Hood FIKUS Nickel
This is a zoom hood for Leica 35mm, 50mm, 90mm, and 135mm lenses, known as FIKUS. It fits 36mm filter threads (A36) and is a rare nickel version. This particular item is engraved not only for the Hektor but also for the Elmar 3.5.When the outer hood is fully collapsed, it accommodates the Elmar 35mm and Hektor 50mm lenses. If you love using black-painted Barnack models like the DII or DIII alon...
-
Condition：
-
91% BC
-
Leitz 28mm Finder SLOOZ Chrome
*Shipping to Japan Only.SLOOZ / 12007. A Leitz-made 28mm external viewfinder with a beautiful matte chrome finish. This particular piece is an early model with a 2.8cm marking and the hexagonal logo. Perfect for pairing with the Red Scale Summaron, Elmarit, or Hektor 28mm.There are quite a few light scuffs visible on the plating of each surface, but no major scratches or dents.The glass was cle...
-
Condition：
-
92% B
-
Leitz Lens Hood IUFOO
¥19,000
*Shipping to Japan only. For overseas customer, please contact us before order.Leitz E39 diameter hood for medium telephoto lenses, IUFOO / 12575N. It is compatible with the Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4, among others.It features a double hook. This hood, which has been produced for a long time since the single hook type, comes i...
-
Condition：
-
96% Mint
-
Summaron 28mm f5.6 Lens Hood SOOBK
Hood for the Summaron 28mm f5.6 (Red Summaron). Leitz product code is SOOBK, later 12500Y. It is an A36 slip-on hood.This is a finely crafted hood with a crinkled baked finish. Although it is an expensive hood, when mounted on the Red Summaron, it presents a compact yet dignified appearance that fulfills the desire for ownership.For those who own a Red Summaron, this is a must-have item. Which ...
-
Condition：
-
96% Mint
-
Summilux 35mm f1.4 Steel Rim Lens Cap FB-05
¥4,000
Lens cap for Steel Rim. Flashback Camera's orignal product.New condition. Made in Japan. *Shipping to Japan only. For oversea customers, please contact us before order.
-
Condition：
-
100% Brand New
-
Leica 21mm Finder Black 12024
12024. This is the current type of Leica 21mm viewfinder, which appears to have already been discontinued. It features a solid brass construction with a black chrome finish, reminiscent of the renowned SBKOO viewfinder from the past. The optical system is multi-coated, providing a very clear view.In like-new condition. There are no signs of use, and it is indistinguishable from unused items. It...
-
Condition：
-
98% Like New
-
Schmidt Lens Hood for Summarit 50mm f1.5
-
Condition：
-
94% A
-
Leitz Lens Hood FLQOO
Early Model FLQOO Hood for Elmar 35mm f3.5 This hood features a three-tier engraving with silver inlay. It is a clip-on type (A36). Made of brass with black paint, it has a chrome screw for fastening.While designed for the Elmar 35mm, it is also compatible with other lenses such as the Summaron 35mm and Elmar 50mm (fitment tested). This is a very stylish hood.Its simple design enhances the look...
-
Condition：
-
93% B
-
Alpa - Leica Adapter Alplei
Alplei. An Alpa lens mount adapter. This adapter converts Alpa mount lenses to Leica screw mount (LTM).It is not coupled to the rangefinder. While it might be common in today's mirrorless era, one wonders how it was used in the past...This is an original Alpa product. It allows you to attach Alpa's renowned lenses, such as the Macroswitar and the Kinoptic Apo-Chromat 100mm f2, to a Leica body. ...
-
Condition：
-
93% B
-
Leitz Sports Finder RASAL Black
The Leitz sports finder RASAL. This piece is finished in black paint. It features frames for 35mm, 50mm, 73mm, 90mm, and 105mm focal lengths. The lens section’s axis rotates, allowing for focal length adjustments, showcasing its remarkable craftsmanship. By adjusting the height of the eyepiece, it also accommodates parallax correction. Distance scale marked in meters. The RASAL finder consists...
-
Condition：
-
96% Mint
- Choosing a selection results in a full page refresh.
- Opens in a new window.
