Skip to content
ACCESSORY
-
Ducati Film Loader
*Shipping to Japan Only. For overseas customer, please contact us before order.A compact film loader for the small Italian Ducati camera. Made of Bakelite. Ducati catalog number OI 7205.1.After turning the handle 12 times, it stops at a length of approximately 47cm. An essential accessory for Ducati users, but one that is surprisingly difficult to find.Shows little sign of use and remains in go...
-
Condition:
-
93% B
-
Alpa Macro-Switar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.Original lens hood for the renowned Macro-Switar 50mm f1.8 and f1.9 lenses for ALPA cameras. ALPA product code: OMXABE. Type B.This is a relatively early version, featuring the old-style ALPA logo and a distinctive crinkle finish.There are some minor signs of wear overall, but there are no dents around the front edge...
-
Condition:
-
92% B
-
THE STRAP ショート | カーキ
*Shipping to Japan Only. For overseas customer, please contact us before order.
-
Condition:
-
100% Brand New
-
THE STRAP ショート | オリーブ
*Shipping to Japan Only.
For overseas customer, please contact us before order.
-
Condition:
-
100% Brand New
-
THE STRAP ショート | ブラック
*Shipping to Japan Only.
For overseas customer, please contact us before order.
-
Condition:
-
100% Brand New
-
THE STRAP ロング | カーキ
¥24,000
*Shipping to Japan Only.
For overseas customer, please contact us before order.
-
Condition:
-
100% Brand New
-
THE STRAP ロング | オリーブ
¥24,000
*Shipping to Japan Only.
For overseas customer, please contact us before order.
-
Condition:
-
100% Brand New
-
THE STRAP ロング | ブラック
¥24,000
*Shipping to Japan Only.
For overseas customer, please contact us before order.
-
Condition:
-
100% Brand New
-
Macro-Adapter-M 14409
¥45,000
Macro adapter for the first-generation Macro-Elmar-M 90mm f4. Leica product code 14409.The compact collapsible Macro-Elmar-M 90mm f4 was introduced in 2003. On its own, the lens has a minimum focusing distance of 0.7m, but with this goggled macro adapter attached, close-up focusing down to 50cm at 1:3 magnification is possible while retaining rangefinder coupling.When used with the second-gener...
-
Condition:
-
95% Mint
-
Leica M4 Soft Case 14538
*Shipping to Japan Only. For overseas customer, please contact us before order.A high-quality leather soft case for the Leica M4, finished in brown. The Leitz product code is 14538.Despite being called a soft case, reinforcing plates are built into the base and the section in front of the lens, providing reassuring protection for the camera.It can of course be used not only with the Leica M4, b...
-
Condition:
-
93% B
-
Leica 21mm Finder 12012
*Shipping to Japan Only. For overseas customer, please contact us before order.21mm viewfinder for Leica cameras. Leitz product code 12012. The successor to the SBKOO. The housing is made of plastic, making it significantly lighter in weight.The glass features multi-coating, providing excellent visibility even in bright sunlight. This is the later German-made version with a stopper.There are a ...
-
Condition:
-
93% B
-
Leitz 28mm Finder 12017
¥21,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 28mm viewfinder with a lightweight plastic body. Introduced as the successor to the metal SLOOZ / 12007 viewfinder. This example is an early version, made in Germany, with no stopper, the Leitz logo, and parallax correction lines.It may be unfair to compare this plastic-bodied version with the earlier metal SLO...
-
Condition:
-
92% B
-
Leitz 35mm Finder SBLOO
*Shipping to Japan Only. For overseas customer, please contact us before order.The SBLOO is Leica’s classic external 35mm viewfinder. Its later product code was 12010. This example is the early version with the hexagonal Leitz logo. Introduced in 1951, it succeeded the renowned WEISU viewfinder.It is, of course, ideal for Barnack Leicas without a built-in 35mm frame and for the M3, but even on ...
-
Condition:
-
95% Mint
-
Leitz VIDOM Finder VIOOH Black Nose
Leica VIOOH Universal Finder, commonly known as the upright-image VIDOM. A classic Leica finder produced over a long period from around 1938 to 1964.This example is a rare version with a black-painted nose section, believed to have been produced between 1945 and 1949. The black-painted area has a matte finish.This black-nose version is also known overseas as the Black Nose model. It is featured...
-
Condition:
-
93% B
-
Wray Universal Finder
¥18,000
*Shipping to Japan Only. For overseas customer, please contact us before order.A universal viewfinder made by Wray of England, a company known for its own Wrayflex SLR cameras and photographic lenses such as the Lustrar and Unilite. Finished in a combination of chrome plating and black paint.It is, quite simply, a complete copy of the Leitz VIOOH finder. The slightly less refined details and fi...
-
Condition:
-
91% C
-
Super-Angulon 21mm f4 Lens Hood IWKOO
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the Super-Angulon 21mm f4. Leitz product codes are IWKOO and 12502N.Engraved Super-Angulon 21mm, with relatively small lettering. A very stylish hood when mounted on the lens.There is some minor paint loss around the front edge of the hood, some light rubbing on the chrome-plated parts, and slight signs...
-
Condition:
-
93% B
-
Leitz Lens Hood FISON
¥20,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Elmar 50mm lenses. The Leitz product code is FISON / 12510. A36 size, slip-on type.There are many different versions of the FISON despite sharing the same code name, making it an interesting accessory to study by period. This chrome FISON is probably the most common version.It fits various generations o...
-
Condition:
-
95% Mint
-
Leitz Lens Hood 12585
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 12585 lens hood. This genuine Leitz hood was supplied during the era of the second-generation Summicron 50mm and 35mm lenses, and succeeded the ITDOO and IROOA hoods.A classic hood compatible with many E39 lenses, including the Summicron 35mm f2 and 50mm f2. It can also be used with Summaron and Elmar lenses.Al...
-
Condition:
-
96% Mint
-
Leitz Lens Hood ITDOO
¥32,000
*Shipping to Japan Only.For overseas customer, please contact us before order.Lens hood for E39 lenses such as the Summicron 35mm, Summicron 50mm, and Summaron 35mm. Single-hook type. When mounted on a lens, the ITDOO has a cleaner, more streamlined appearance than the later IROOA, and seems especially well suited to 35mm lenses such as the 8-element Summicron.A lens hood with a minimalist, fun...
-
Condition:
-
93% B
-
Leitz Visoflex / Leicaflex Adapter 14127
¥14,000
*Shipping to Japan Only. For overseas customer, please contact us before order.An adapter for mounting Visoflex lenses on the Leicaflex and Leica R cameras. The Leitz product code is 14127.Although there is no coupling with the lens itself, the adapter is equipped with an aperture setting and cam to transmit aperture information to the camera body. Both its construction and functionality are th...
-
Condition:
-
94% A
-
Hasselblad A12 Magazine
*Shipping to Japan Only. For overseas customer, please contact us before order.A12 film magazine for Hasselblad cameras. Chrome finish. The first two letters of the serial number are RI, indicating manufacture in 1984. The serial numbers of the magazine body and film holder do not match in the last three digits.Fully serviced and ready for practical use.There are some signs of use on the mounti...
-
Condition:
-
93% B
-
Hasselblad Reflex Viewfinder
*Shipping to Japan Only. For overseas customer, please contact us before order.Reflex viewfinder for the Hasselblad FlexBody, ArcBody, and 903SWC.It attaches to the camera body via a focusing screen adapter. As it uses only a mirror without a prism, the image is laterally reversed.It was sold from 1996 to 2007.The item shows almost no signs of use and is in very clean cosmetic condition. Both t...
-
Condition:
-
94% A
-
Leicavit MP Chrome
*Shipping to Japan Only. For overseas customer, please contact us before order.Leicavit MP in chrome. Leitz product codes SYOOM-M, SMYOM, or 14018. This Leicavit can be fitted to the Leica MP and Leica M2. The tripod socket is the large-thread type.Although the M-series Leica adopted lever film advance, this Leicavit allows even faster shooting.It looks superb on an MP, of course, but also espe...
-
Condition:
-
91% C
-
Leitz Strap 14092
*Shipping to Japan Only. For overseas customer, please contact us before order.14092. Genuine Leica leather strap. This example is made from thinner leather, giving it a softer and more flexible feel. As expected from Leitz, no compromises were made even with the strap, and high-quality leather was used throughout. The leather is stamped LEITZ WETZLAR GERMANY.It becomes softer and conforms more...
-
Condition:
-
95% Mint
-
Leitz Lens Hood FIKUS Nickel
¥50,000
Leitz FIKUS zoom lens hood for 35mm, 50mm, 90mm, and 135mm lenses. A36 clamp-on type. This is the rare nickel version.This example is marked for 13.5cm, 9cm, Summar 5cm, and Hektor 5cm. The hood section features a silver-inlaid Ernst Leitz Wetzlar engraving.An ideal accessory for those who use black-paint Barnack Leicas such as the DII and DIII, or nickel-finished lenses. A convenient hood that...
-
Condition:
-
93% B
-
Leitz VIDOM Finder Black / Nickel
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz VIDOM reverse-image universal finder. A beautifully finished accessory in black paint and nickel.This example is the early single-piece nose version of the reverse-image VIDOM. The section from the front of the finder through the main body is made as a single black-painted piece, and it also features the somewh...
-
Condition:
-
93% B
-
Leicavit M Black Paint
Leicavit M in black paint finish. Introduced in 2003 as the rapid winder supplied for the Leica MP 0.72 Black Paint. Leica product code 14009. This example was officially imported into Japan by Sibel Hegner.It can also be used with the Leica M6, M6 TTL, M7, MP, M4-P, and M4-2.A trigger is built into the baseplate. Simply pull it out, hook it with your finger, and pull to advance the film quickl...
-
Condition:
-
96% Mint
-
Leitz 28mm Finder SLOOZ Black Chrome
Leitz genuine metal 28mm finder, SLOOZ. Later code name 12007. Finished in black chrome. An ideal companion for the Elmarit 28mm or the red Summaron.It pairs beautifully with black paint bodies, offering a refined and understated look.There are some minor scuffs on the rim of the objective side and on the base of the shoe, but otherwise there is very little sign of use and the overall appearanc...
-
Condition:
-
93% B
-
Leitz 35mm Finder SBLOO
*Shipping to Japan Only. For overseas customer, please contact us before order.The SBLOO is Leica’s classic external 35mm finder, later assigned product code 12010. This example is the early version with the Leitz logo inside a hexagonal frame. Introduced in 1951, it succeeded the WEISU finder.It is an excellent accessory not only for Barnack Leicas and the M3, which lack a built-in 35mm frame,...
-
Condition:
-
93% B
-
Summarit 50mm f1.5 UV FIlter XOOYL
*Shipping to Japan Only. For overseas customer, please contact us before order.A genuine Leitz slip-on UV filter for the early Summarit 50mm f1.5 and Xenon 50mm f1.5. The Leitz product code is XOOYL, later 13205.The genuine XOONS hood can be attached while this filter is mounted on the lens. The inside is lined with velvet to protect the lens barrel, reflecting the exceptionally thoughtful cons...
-
Condition:
-
94% A
-
Leitz Lens Hood IROOA
¥45,000
*Shipping to Japan Only. For overseas customer, please contact us before order.The classic Leica lens hood, IROOA. This is the early version, characterized by a slightly longer hood than later models. It fits lenses with an E39 39mm screw-in filter thread.As an early IROOA, it is marked only for the Summaron 3.5cm and Summicron 5cm, but it can also be used with lenses such as the Summicron 35mm...
-
Condition:
-
97% Like New
-
Leitz Lens Loope VEHIG
¥18,000
*Shipping to Japan Only. For overseas customer, please contact us before order.VEHIG + LOOCG. A set consisting of a housing with ground glass and a sliding 5x magnifier. Made around 1933.This is the early version, with the magnifier simply sliding into place rather than using the later bayonet-type fitting. Originally intended as an attachment for copying equipment, it can also be used for chec...
-
Condition:
-
91% C
-
Leitz Tripod TOOUG
¥16,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz tabletop tripod. The product code is TOOUG, later changed to 14100. It bears the earlier E. LEITZ logo. The tripod screw is the large-thread type.The tripod body is made of cast aluminum and finished with an attractive textured black paint. It is made with the high precision typical of Leitz, giving it a very s...
-
Condition:
-
93% B
-
Schmidt Summarit 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.A lens hood made for the Summarit 50mm and sold under the Actina brand by Schmidt, the Japanese distributor for Leitz.It attaches to the lens with a retaining screw. The hood is a slip-on type and can be mounted while an E41 filter remains attached.Actual weight is approximately 31g. Compared with the substantial fee...
-
Condition:
-
94% A
-
Leica M3 Case
*Shipping to Japan Only. For overseas customer, please contact us before order.Genuine Leica M3 case with large tripod screw. This is an official Japanese-market version featuring the cloisonné enamel emblem of Schmidt Shokai, the authorized Leica distributor in Japan.It can also be used with Leica cameras from the M2 through the M6, as well as the current MP, except for the M5.There are some s...
-
Condition:
-
94% A
-
Leitz 50mm Finder SBOOI
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica 50mm finder. The Leitz product code is SBOOI, later changed to 12015. A masterpiece of Leitz finder design, combining simplicity with functional beauty. Look through it, and somehow the world seems just a little more beautiful.This example is the early version marked 5cm. As with many classic Leitz accessories,...
-
Condition:
-
93% B
-
Visoflex III
*Shipping to Japan Only. For overseas customer, please contact us before order.Visoflex III. Following the Visoflex I for Leica screw-mount cameras and the early Visoflex II for M-mount cameras, the Visoflex III was introduced in 1963. Leica product code 16498. The pentaprism and mirror housing are included as a set.Improved from the Visoflex II, the III allows the mirror speed to be changed by...
-
Condition:
-
94% A
-
Leitz Lens Hood OLLUX
Dedicated hood for the Summilux 35mm f1.4 1st, commonly known as the Steel Rim. Leitz product code OLLUX, later changed to 12522H. This stylish hood is widely known as the OLLUX.This example is the early type engraved OLLUX, before the designation was changed to 12522. Among OLLUX-marked hoods, this is the later Version 2, featuring arrow engravings on both sides.With its stylish design and pre...
-
Condition:
-
97% Like New
-
Summarit 50mm f1.5 Lens Hood XOONS
¥36,000
*Shipping to Japan Only. For overseas customer, please contact us before order.XOONS hood for the Summarit 50mm f1.5. The later product code is 12520. Made of brass with a black crinkle finish, it is beautifully constructed, with a substantial feel rarely seen in modern industrial products.It can be used not only with the Summarit, but also with its predecessor, the Leitz Xenon 50mm.It may look...
-
Condition:
-
95% Mint
-
Nikkor 35mm f1.8 (S) Lens Hood
Dedicated lens hood for the Nikkor 35mm f1.8 in Nikon S mount. Made of aluminum with a black paint finish.This example features the Mount Fuji logo, also known as the optical mark or onigiri mark, making it a later version of this hood.A handsome hood that further enhances the appearance of this renowned lens. Clean examples have become increasingly difficult to find in recent years.Please note...
-
Condition:
-
93% B
-
Leica M8 M9 Battery Charger 14470
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica genuine compact battery charger. Leica product code 14470.Used for charging the 14464 / BP-SCL1 lithium-ion battery for the Leica M8 / M8.2 / M9 / M9-P / M Monochrom / M-E.The batteries for the M8 and M9 have relatively limited capacity, so it is convenient for those who carry several spare batteries. Having an...
-
Condition:
-
95% Mint
-
Leica Lithium Ionen Battery BP-SCL2
*Shipping to Japan Only. For overseas customer, please contact us before order.Lithium-ion battery for the Leica M Typ 240 series. BP-SCL2. Product code 14499.This item is becoming increasingly difficult to find new. It is also compatible with related models including the Typ 246, Typ 262, and M-P Typ 240.It shows little sign of use and is in clean condition. We have tested both charging and us...
-
Condition:
-
95% Mint
-
Nikon Universal Finder MIOJ
A Nippon Kogaku erect-image universal finder, with a design closely resembling the Leitz VIDOM finder. Finished entirely in chrome plating.The eyepiece is engraved NIPPON KOGAKU TOKYO. On the underside of the accessory shoe foot is a discreet Made In Occupied Japan, or MIOJ, engraving, indicating manufacture in Japan during the Allied occupation. One can imagine how those involved in its produc...
-
Condition:
-
93% B
-
Nikkor 35mm f2.5 (S) Lens Hood
¥55,000
Genuine hood for the late barrel-aperture version of the W-Nikkor 35mm f2.5 for Nikon S-series cameras. It looks very similar to the hood for the 35mm f1.8, but is approximately 2mm longer.This example bears the Fuji mountain logo, also known as the optical mark or onigiri mark, making it the later version of this hood. In other words, the later version of the late-model hood.Aluminum with blac...
-
Condition:
-
96% Mint
-
Leitz Waist Level Finder AUFSU
Leitz waist-level 50mm reflex finder, AUFSU. This is the later version, introduced in 1932. The field of view corresponds to a 50mm lens.It is designed to be mounted on the accessory shoe. When mounted sideways at a 90-degree angle, it can also be used as a right-angle eye-level finder. Compact and precisely made in typical Leitz fashion, it is an appealing little accessory.Practicality aside, ...
-
Condition:
-
94% A
-
Leitz 90mm Finder SGVOO
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 90mm finder, SGVOO, later designated 12025.This is the later version with both meters and feet scales, and features parallax compensation. A well-made finder with a beautiful chrome-plated finish. It provides a life-size view with a bright frame, offering a very clear image.The SGVOO was the final development o...
-
Condition:
-
96% Mint
-
Leitz Finder WINTU
¥19,000
*Shipping to Japan Only. For overseas customer, please contact us before order.A Leitz right-angle finder, an improved version of the WINKO finder. It features a movable prism, and by lowering the arm, the rangefinder image can also be viewed from the side. This example is the chrome version.A fair number of these can still be found, so they must have sold reasonably well at the time. Whether p...
-
Condition:
-
93% AB
-
Leitz Lens Hood OLLUX
OLLUX hood, designed exclusively for the Summilux 35mm f1.4 1st version, commonly known as the Steel Rim. The later product code is 12522H. This hood is commonly referred to as the OLLUX.This example is an early version with the OLLUX engraving, Version 1 without the arrow marking. With its stylish design and precise construction, it complements the early Summilux both in performance and appear...
-
Condition:
-
90% C
-
Hasselblad Magnifying Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.42013. Magnifying hood for Hasselblad cameras. Early version. Compatible with the 500C/M, 500EL/M, and 200FC. It can also be used with the SWC/M when fitted with the separately sold focusing screen adapter.It is used in place of the original folding focusing hood. The magnified view and built-in diopter adjustment pr...
-
Condition:
-
94% A
-
Leitz Macro-Adapter-R 14256
Leitz Macro Adapter-R. Leitz product code 14256.This is an extension ring that allows 1:1 macro photography when used with the Macro-Elmarit-R 60mm f2.8. It also supports automatic diaphragm operation and can be used with other Leica R-mount lenses.In like-new condition with no signs of use.Comes with third-party front and rear caps and the original leather case.The price includes domestic ship...
-
Condition:
-
96% Mint
-
Leica IIIf Case
*Shipping to Japan Only. For overseas customer, please contact us before order.A rapid-wind leather case for Barnack Leicas such as the Leica IIIf. The camera mounting screw is the fine-thread type.The lens compartment has sufficient depth to accommodate not only 35mm lenses, but also bodies fitted with 50mm lenses such as the Summarit and collapsible Summicron.The price includes domestic shipp...
-
Condition:
-
93% AB
-
Nikon 35mm Finder
*Shipping to Japan Only. For overseas customer, please contact us before order.Nippon Kogaku Nikon 3.5cm finder for the Nikon S series. Introduced in 1957.This example features the Mt. Fuji mark. Its large eyepiece provides a bright, clear, and easy-to-view image. A perfect companion for Nikkor 35mm lenses such as the f1.8, f2.5, and f3.5!This item was previously sold by our shop and has now re...
-
Condition:
-
94% A
-
Leitz Lens Hood IROOA
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica’s classic lens hood, the IROOA, commonly known simply as the Irooa. The later product code is 12571J. This example features the double-hook design.There are several variations of the IROOA, and this particular version has six compatible lenses engraved on the hood.It fits lenses with an E39 39mm screw-in filter...
-
Condition:
-
91% C
-
Summilux 50mm f1.4 Lens Hood 12521G
¥23,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for the Summilux 50mm f1.4, commonly known as the Lady. It fits both the 1st and 2nd versions. Leitz product code 12521G. Equivalent to the XOOIM.The elaborate combination of textured black paint and matte bead-blasted chrome reflects the superb craftsmanship of Leitz’s golden era.An elegant hood that perfe...
-
Condition:
-
92% B
-
Voigtlander VC Meter II Silver
¥23,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Voigtländer VC Meter II. This is the silver version. Made by Cosina, it is a standalone exposure meter designed to be mounted on a camera accessory shoe.Set the ISO speed, then use the dials on either side to select a combination of shutter speed and aperture. When metering, a green lamp lights up when the exposure i...
-
Condition:
-
96% Mint
-
Alpa Kern Switar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.Type A. Designed for Alpa lenses with the Type A front diameter, including the Kern Switar 50mm f1.8 and Auto Switar. Though compact, its textured finish and solid, substantial construction are unmistakably Alpa, giving it a remarkably refined appearance.Please note that it is not compatible with the Macro Switar 50m...
-
Condition:
-
94% A
-
Leicavit MP Chrome
Leicavit MP Chrome. Leitz product codes are SYOOM-M, SMYOM, or 14018. This Leicavit is compatible with the Leica M2 and Leica MP, and features the large tripod thread.While M-series Leicas adopted lever film advance, fitting this Leicavit allows even faster winding and rapid shooting.It looks superb on the MP, of course, but the combination with an M2, with the Leicavit fitted beneath its rewin...
-
Condition:
-
92% B
-
Leitz Rangefinder HFOOK Black / Nickel
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz HFOOK shoe-mounted rangefinder. This model combines the standalone FOKOS rangefinder with the movable FOKAB accessory shoe. Black and nickel finish with a nickel foot. The distance dial is marked in feet. The base length is 75mm, with a minimum measuring distance of 2.6 feet, approximately 0.8m. This example is...
-
Condition:
-
94% A
-
Elmar 35mm f3.5 Lens Hood FLQOO N.Y. Leitz
¥52,000
A New York Leitz-made FLQOO hood. Brass with a black paint finish, fitted with a chrome screw. Its dimensions are almost identical to the German-made FLQOO, but the most notable difference is the engraving, which reads Elmar 50mm. Of course, it can also be used with the Elmar 35mm and Summaron 35mm. Fits A36 size lenses.Compared with the German version, the front rim of the hood is thinner, and...
-
Condition:
-
92% B
-
Elmar Lens Hood FISON New York Leitz Black
A FISON lens hood made by Leitz New York, designed for the Elmar 50mm. Made of brass. Chrome-plated examples are occasionally seen, but this one features a rare black paint finish. The side of the base is marked E. Leitz New York in white lettering.Several variations of the New York Leitz hood for the Elmar 50mm are known, and this example is the type with a locking screw and reinforcing ribs. ...
-
Condition:
-
92% B
- Choosing a selection results in a full page refresh.
- Opens in a new window.