Skip to content
ACCESSORY
-
Leitz 21mm Finder SBKOO Black
Leitz 21mm finder, SBKOO. Later code 12002. Black chrome finish. Suitable for Super-Angulon 21mm and Elmarit 21mm lenses. This is an ultra-wide-angle viewfinder with a bright frame, offering a bright and easy-to-see view.There is some evidence of use, such as wear on the black chrome at the corners and a small scratch on the eyepiece, but it's in good, practical condition. The glass was profess...
-
Condition：
-
92% B
-
Leitz 28mm Finder SLOOZ Black
Leitz Genuine Metal 28mm Finder, SLOOZ. Later Code 12007.This item is in black chrome, suitable for pairing with the Elmarit 28mm or red-scale Summaron. This finder complements not only black chrome bodies but also black paint bodies.The rubber on the eyepiece shows some signs of use, but the black chrome parts are in excellent condition. Overall, this finder has minimal signs of use and is ver...
-
Condition：
-
94% B
-
Leitz SOOKY-M
*Shipping to Japan Only.Leica M-series close-up attachment. The product codes are SOOKY-M or SOMKY, later changed to 16507.This accessory allows for close-ups from approximately 1m to 0.5m when used with the collapsible Summicron 50mm f2 or the Elmar 50mm f2.8 lenses. When using regid Summicron, you need to remove the lens head and insert the UOORF/16508 adapter in between.Although it was origi...
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Black
*Shipping to Japan only.Elmar 50mm f3.5 Hood. Early type of FISON without retaining screw. It is from an era when the hood was made in one piece. This is likely the model following the very first FISON, which required repositioning every time the shooting distance was changed due to its rectangular shape. Made of brass with black paint.The hood measures 20mm in total length and lacks markings s...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON
¥12,000
*Shipping to Japan Only.Leitz code: FISON / 12510. Elmar 50mm lens hood, FISON. A36 size.The FISON model comes in various types depending on the era, even under the same code name, making it a fascinating accessory for historical study. This FISON chrome version is likely one of the most common types among them.Satin chrome plating shows some general wear and scratches, but there are no dents o...
-
Condition：
-
92% B
-
Summarit 50mm f1.5 Skylight Filter
¥13,000
*Shipping to Japan only.A clip-on original Skylight filter compatible with the early version of the Summarit 50mm f1.5, as well as its predecessor, the Xenon 50mm f1.5. Made by Leitz New York.This filter can be used with the original XOONS lens hood while attached. The interior is lined with velvet, showcasing a refined design.The price includes domestic shipping.The chrome-plated filter frame ...
-
Condition：
-
93% B
-
Leitz Lens Hood IROOA
*Shipping to Japan Only.Leica’s classic lens hood, the IROOA, also known as the IROOA. The later product code is 12571J. It fits lenses with an E39 (39mm screw-in) diameter. This version features a double-hook design. There are various versions of the IROOA, but this one is engraved with four compatible lenses.The compatible lenses include the Summicron 35mm f2 8-element, Summaron 35mm, Summicr...
-
Condition：
-
93% B
-
Leitz Extention Ring 16469Y
*Shipping in Japan Only.Leica M-mount close-up (extension) ring. Product code: OUFRO / 16469. Originally designed for the Visoflex, but since it has Leica M-mounts on both sides, it can also be used with live-view cameras and mirrorless systems. It’s a very well-built item, as expected from a genuine Leitz product. While it doesn’t couple with the rangefinder, it allows for quite close focusing...
-
Condition：
-
92% B
-
Leitz MR Ring 14167
¥14,000
*Shipping to Japan Only.An adapter for mounting Visoflex lenses on Leica R bodies. It allows you to enjoy a wide range of Visoflex lenses on Leica R-type cameras.Minimal signs of use, in clean condition.The price includes consumption tax and domestic shipping.
-
Condition：
-
94% A
-
Leitz UVa Filter E60 13381
*Shipping to Japan Only.Leitz E60 UVa filter. Product code: 13381. It is compatible with lenses with a 60mm diameter, including the Noctilux 50mm f1 and Macro-Elmarit-R 60mm.In excellent condition with no signs of use; it appears to be almost unused. Comes with the original case and box. The Leitz branding is a key feature, making it ideal for those who value period accuracy.The price includes ...
-
Condition：
-
96% Mint
-
Rollei Lens Hood (RIII)
*Shipping to Japan only.Genuine lens hood for the Rollei Rolleiflex 2.8F series. Commonly known as Bayonet 3 (Bay3). Features the new logo engraving.Overall, there are signs of use and some retouching, but there are no noticeable dents or distortions, making it in optimal condition for practical use. Comes with a genuine leather case. Price includes domestic shipping.
-
Condition：
-
92% B
-
View Arco
The "View Arco" reflex finder, released in 1953 for the Arco 35, allows for close-up shooting down to 35 cm and provides depth-of-field preview based on aperture settings, making it a fun accessory. It is intricately designed to be parallax-corrected and synchronized with the camera's focusing mechanism. The accessory adds a unique, mechanical look when mounted on the camera body.The finder len...
-
Condition：
-
94% A
-
Robot Lens Hood
¥11,000
*Shipping to Japan Only.Lens hood for Robot cameras. Screw-in type, mainly compatible with post-war lenses that have threaded filter mounts. The screw diameter is approximately 38mm, making it suitable for many Robot Royal lenses as well. By pressing the two protrusions on the side of the hood and pushing the hood section in, it can be folded. Price includes domestic shipping.The chrome-plated ...
-
Condition：
-
93% B
-
Summicron 50mm f2 Lens Hood SOOFM
*Shipping to Japan Only.Leitz-made folding lens hood for the Summicron 50mm.This type of folding hood originated with the Xenon 50mm f1.5, and later was used for the Summitar and then became compatible with both Summitar and Summicron with the advent of the Summicron. It was exclusively used for the Summicron after the retirement of the Summitar. Knowing this history, one can truly appreciate i...
-
Condition：
-
91% C
-
Leitz Rangefinder FODIS Black
FODIS Rangefinder. A standalone rangefinder by Leica, featuring the early small dial type. Manufactured in the late 1920s. Black and nickel finish. Feet scale. Baseline length of 83mm. Minimum measuring distance is 3 feet.This early rangefinder is a perfect match for vintage Leica A-type models.There is some paint loss from use, but considering the accessory's age of over 90 years, it is in qui...
-
Condition：
-
92% B
-
Leitz Rangefinder FODIS Black
FODIS rangefinder. A standalone rangefinder from Leitz, this early model features a small dial and is believed to have been manufactured in the late 1920s. It comes in black and nickel, with feet markings. The baseline length is 83mm, and the minimum measuring distance is 3 feet. The hexagonal logo, D.R.P. text, and various engravings are beautifully finished with silver inlay. The serial numbe...
-
Condition：
-
92% B
-
Zeiss 85/135mm Finder
*Shipping to Japan Only.Finder mask for Contax II, model 543/7, made by Zeiss-Ikon. For Contax III, the code is 544/7.When mounted on the accessory shoe, it covers the front of the viewfinder and provides frames for 85mm or 135mm lenses. The mechanism allows the 135mm frame to be retracted by turning the knob on the front of the finder mask.This mask does not obstruct the rangefinder's double i...
-
Condition：
-
93% B
-
Zeiss 85/135mm Finder
*Shipping to Japan Only.Contax IIa and IIIa Finder Mask, model 563/03. Post-war Zeiss manufacture. This mask is designed to be inserted between the viewfinder's eyepiece and the front of the viewfinder on the right side of the camera body. It features a 135mm frame inside the 85mm frame, which can be switched using the side knob.The eyepiece side includes a parallax correction ring, which shoul...
-
Condition：
-
94% A
-
Rayqual Mount Adapter LR - LM
¥12,500
*Shipping to Japan Only.Rayqual Mount Adapter LR-LM V3.This adapter converts Leica R lenses to Leica M mount. You can enjoy legendary lenses such as the Summilux-R 35mm, 80mm, and Summicron-R on digital Leica M cameras. Note that it is not coupled with the rangefinder.Made by Miyamoto Seisakusho in Nerima, Tokyo. It offers reliable domestic design and manufacturing with a reputation for stable ...
-
Condition：
-
94% A
-
Leitz Tripod Head KGOON
*Shipping to Japan Only.Leitz medium-sized ball head. A universal type that supports both large and small screws on both male and female ends, marked with the D stamp as proof—hence the nickname D Head.This brilliant mechanism automatically switches between standard and smaller thread sizes with a spring-loaded adjustment when different sizes of equipment are attached. It’s a prime example of L...
-
Condition：
-
91% C
-
Leitz Lens Hood 12585
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 12585 Lens Hood. This is the original lens hood for the second generation of Summicron 35mm and 50mm lenses, succeeding the IROOA hood.It is a classic hood that fits most lenses with a 39mm filter thread (E39), including the Summicron 35mm f2, 50mm f2, as well as the Summaron and Elmar. This is an early type wi...
-
Condition：
-
94% A
-
Leicavit M Black Paint
Leicavit M Black Paint. This rapid wind lever was supplied for the Leica MP6, with the product code 14009 from Leitz. It's a genuine Japanese Siebel-Hegner product.Compatible with Leica M6, M6TTL, M7, MP, M4-P, and M4-2. It is used by replacing the original bottom cover. The lever features a trigger built into the bottom that allows you to complete the winding simply by pulling and engaging the...
-
Condition：
-
94% A
-
Leitz Lens hood IROOA
*Shipping to Japan only. For overseas customer, please contact us before order.The classic Leica lens hood, IROOA. Double hook design. The later product code is 12571J. Suitable for E39 (39mm screw-in) lenses.Like other Leica hoods, the IROOA comes in various versions. This one is an early model with a shorter hood height and features engravings for six compatible lenses. It is one of the most ...
-
Condition：
-
95% Mint
-
Leitz Lens Hood IROOA
*Shipping to Japan only. For overseas customer, please contact us before order.The classic Leica lens hood, IROOA. Double hook design, with the later product code 12571J. It fits E39 (39mm screw-on) lenses.The IROOA comes in many variations, and this particular model is a later version with a shorter hood height compared to earlier IROOA models, featuring engravings for four compatible lenses. ...
-
Condition：
-
91% C
-
Leica Body Cap Black
*Shipping to Japan Only.Genuine Leitz body cap. The body cap code numbers are IVZOO, later changed to 14056.This is a brass cap with a sleek black lacquer finish, suitable for use with black-painted bodies. While there are many variations of these black lacquered caps, this is a standard type among them. Nonetheless, it remains a rare cap.Mounted and verified on the body. Price includes domesti...
-
Condition：
-
93% B
-
Leitz UVa Filter E60 13381
*Shipping to Japan only.13381. Leitz UVa Filter. E60. 60mm screw-in. Suitable for lenses such as the Noctilux E60 and Summilux 75mm f1.4. The filter frame is engraved with Leitz. Comes with the original box for those who are particular about Leitz.The filter frame and glass are in the same condition as when new. There are no signs of use on the filter threads. The price includes domestic shipping.
-
Condition：
-
98% Like New
-
Leitz Lens Hood IUFOO
*Shipping to Japan Only.The Leitz E39 screw-mount lens hood, IUFOO/12575, is compatible with medium telephoto lenses such as the Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.This piece is a single-hook model, whereas later versions feature a double-hook design. It was produced for a long time with various shapes and engravings. This specific ex...
-
Condition：
-
93% B
-
Leicavit MP Black Paint
Leica Bit MP Black Paint. Leica code SYOOM-M, SMYOM, or 14018.This is a film winding mechanism compatible with Leica M2, M1, MD, and Leica MP. This particular unit is a rare original black paint version.It is an early model with three-line engravings on the back. The sight of it mounted on a Leica M2 Black Paint or similar always captivates.There is a very minor dent on one corner of the bottom...
-
Condition：
-
93% B
-
Summicron 50mm f2 Lens Hood VTROO
*Shipping to Japan Only.A lens hood for the rigid Summicron (both early and late versions) for enlarging purposes, introduced in 1956. The Leitz product code is VTROO, later updated to 16686. Although not its original purpose, it can also be used as a hood with aperture control functionality, similar to the VALOO for the Elmar 50mm.(Installation Instructions)1. Insert the two protruding parts o...
-
Condition：
-
93% B
-
Leitz A36 山高 Cap Black
A cap that covers the Elmar 50mm f3.5 with a 36mm diameter filter attached.This item is made of brass with black paint and features velvet on the back. It is quite hard to find.Considering it has been over 90 years since its manufacture, it is in remarkably good condition.There is minor deterioration of the paint due to aging, but there is almost no noticeable wear from use. The velvet on the b...
-
Condition：
-
94% A
-
Leitz Yellow Filter E41
*Shipping to Japan only. XOOQG. The later code is 13160. E41 diameter Yellow Filter No.1.Originally for the Summarit 50mm f1.5, it is also compatible with the Xenon 50mm f1.5 and the first-generation Summilux 35mm f1.4 Steel Rim.Price includes domestic shipping.The glass has a few very faint cleaning marks. The filter frame shows almost no signs of use and is in good condition. It comes with th...
-
Condition：
-
95% Mint
-
FB-07 真鍮素地 Elmar 50mm Lens Hood
*Shipping to Japan Only.
-
Condition：
-
95% Mint
-
FB-07 真鍮黒染 Elmar 50mm Lens Hood
*Shipping to Japan Only.
-
Condition：
-
94% A
-
Leitz Sports Finder RASAL Black
eitz Sports Finder RASAL. This is a black paint version. It comes with frames for 35mm, 50mm, 73mm, 90mm, and 105mm. The objective section features a rotating axis that allows you to change the focal length, showcasing its superb craftsmanship. By adjusting the height of the eyepiece, it also accommodates parallax correction. Distance scale is in feet.The RASAL finder is composed of two parts: ...
-
Condition：
-
94% A
-
Leitz Lens Hood FIKUS Nickel
Leica Zoom Hood for 35/50/90/135mm, FIKUS. Rare nickel-plated finish. 36mm slip-on. This item features engravings for both Hektor and Summar.When the outer hood is fully retracted, it is compatible with the Elmar 35mm f3.5.The Ernst Leitz Wetzlar engraving is inlaid in silver. There is also a Germany engraving.The matte paint on the inside of the hood shows some signs of use, but otherwise, the...
-
Condition：
-
93% A
-
Leitz Lens Hood IROOA Bundeseigentum
IROOA hood for the West German Federal Army Leica M3 and others. Engraved with Bundeseigentum 12-130-0927. It is believed to have been included with military Summaron 35mm f2.8 lenses with goggles.The lens name engraving is the 6-line type. This is the final version of the IROOA designation. It is compatible with E39 type 35-50mm lenses.There are some scuffs and signs of use on the front edge a...
-
Condition：
-
93% B
-
Leitz UVa Filter E41
*Shipping to Japan only.
-
Condition：
-
94% A
-
Leitz Green Filter E43
*Shipping to Japan only. For overseas customer, please contact us before order.A green filter for the Summilux 50mm f1.4. Specifically designed to be thin to avoid interference when the XOOIM or 12521G hood is attached. Price includes domestic shipping.Both the glass and filter frame are in excellent condition.
-
Condition：
-
95% Mint
-
Leitz SL Filter E39 New York
*Shipping to Japan Only.
-
Condition：
-
94% A
-
Leica R - Alpa Adapter Leibag
*Shipping to Japan Only. For overseas customer, please contact us before order.Leibag. An adapter to convert Leica R-mount lenses to Alpa mount. It is an Alpa original part, though it is unmarked. Manual aperture control.This item might initially cause some head-scratching, as it allows you to use R-mount lenses on Alpa cameras. However, there may be enthusiasts among Alpa users who are searchi...
-
Condition：
-
94% A
-
Leitz Lens Hood 12585
*Shipping to Japan Only.Leitz 12585 lens hood, designed for the second generation of lenses like the Summicron 50mm and 35mm. It succeeded the IROOA hood.This is a classic hood that fits most E39 diameter lenses, including the Summicron 35mm f2 and 50mm f2, as well as lenses like the Summaron and Elmar. This particular hood is an early version without the 35/2 marking.It shows minimal signs of ...
-
Condition：
-
96% Mint
-
Leitz Tripod Head KGOON
¥18,000
The medium-sized ball head by Leitz, product code KGOON, later changed to 14115, with the E. Leitz hexagon logo. Both the male and female sides have a small screw.This model has been manufactured since 1936, with changes made over time. This particular piece is the fourth version, which has an added horizontal bar under the base for finger support, making it easier to attach the camera.It can b...
-
Condition：
-
92% C
-
Leitz 50mm Finder SBOOI
*Shipping to Japan Only. The classic 50mm viewfinder for Leica, the SBOOI, with the later code 12015. This is an early model marked with 5cm, and the eyepiece is also chrome-plated. It has one shoe mounting screw, and both sides of the viewfinder body feature knurled grips for slip resistance.A masterpiece from Leitz, this viewfinder exudes simple functional beauty and provides the best view. W...
-
Condition：
-
90% B
-
Leitz VIDOM Finder VIOOH
Leitz's right-angle VIDOM viewfinder, VIOOH. Black/chrome. It was produced for a long period from around 1938 to 1964.It features frame switching for 35/50/85/90/135mm focal lengths. As you change the focal length while looking through it, the frame narrows in a very cyber and cool manner. Parallax correction is marked in feet.This is a clean right-angle VIDOM in terms of both appearance and gl...
-
Condition：
-
93% B
-
Leitz VIDOM Finder VIOOH
¥19,000
Leitz's right-angle VIOOH viewfinder. Black/chrome. It was produced for a long time from around 1938 to 1964.It has frame switching for 35/50/85/90/135mm focal lengths. As you change the focal length while looking through it, the frame narrows in a very cyber and cool manner. Parallax correction is marked in meters.There are small hand-engraved characters under the shoe mount. Although there ar...
-
Condition：
-
93% B
-
Leitz Visoflex / Leicaflex Adapter 14127
*Shipping to Japan Only.This is an adapter for mounting a Biso Flex lens onto a Leica Flex or Leica R camera, with product code 14127.While it does not provide lens linkage, it includes an aperture and cam to transfer aperture information to the camera body. The construction and functionality are quite precise.Recently, Biso Flex lenses have gained attention for their performance when used digi...
-
Condition：
-
92% B
-
Leitz UVa Filter E43
Chrome-finished UVa filter for Summilux 50mm f/1.4. A perfect match for a noble lady. The Leitz code is YMZOO, later 13206. It has the ERNST LEITZ WETZLAR engraving and red-lettered U.V.a. engraving. With a diameter of E43, it is a 43mm screw-in filter. It is compatible with the spherical Summilux 50mm f/1.4. Specifically designed to be extremely thin, this filter is necessary when attaching th...
-
Condition：
-
93% B
-
Ducati Lens Hood for Vitor 35mm f3.5
Italian-made 35mm half-frame camera standard lens hood for the Ducati Sogno and Simplex, Vitor 35mm f3.5. Ducati product code: OI 3401.1. Made of aluminum.This is a slim and charming hood. All Ducati accessories are exceptionally well-made and highly collectible.It shows almost no signs of use and is very clean.The original box is included. A rare item.
-
Condition：
-
95% Mint
-
Ducati Filter Set
UV and yellow filter set for Ducati Sogno and Simplex's Vitor 35mm and Etar 35mm lenses.Ducati product codes: UV filter is 2401.1, and yellow filter is 2401.3.The filters are screw-in type with internal threads. The design of the knurled outer ring on the tip of the Vitor lens serves as the threading mechanism.While similar internal screw-in filters are also found on lenses from Zeiss and Voigt...
-
Condition：
-
93% B
-
Leitz Filter Adapter SOOGZ
Leitz filter adapter ring. It allows mounting an E39 filter onto an A36 lens. Leitz product code: SOOGZ / 13154. It features a charming design with screws protruding unexpectedly.Specifically, it enables A36 lenses such as Elmar 50mm f3.5, Hektor 50mm f2.5, Summar 50mm f2, Summaron 35mm f3.5, Elmar 35mm f3.5, and others with an outer diameter of 36mm (A36) to use E39 filters with an inner diame...
-
Condition：
-
95% Mint
-
Leitz Close-up Attachment ADVOO
Close-up Attachment for Leica IIIg, ADVOO. Later product code is 16503. Introduced in 1959.The Leica IIIg, the last model of the Barnack Leica series, has a taller body compared to previous models like the IIIf, making SOOKY and NOOKY unusable. This ADVOO attachment is a luxurious tool created solely for the IIIg, showcasing the opulence typical of Leitz. Manufactured during the golden age of p...
-
Condition：
-
95% Mint
-
Leitz Lens Hood 12585H
Leitz 12585H lens hood. This is the genuine hood from the second generation of Summicron 35mm and 50mm lenses, fitting most E39 diameter lenses. It succeeded the IROOA hood.It's a classic hood that can be used with lenses like the Summicron 35mm f2, 50mm f2, and others, including Summaron and Elmar lenses. This specific hood is a later type marked for the 35/2 lens.*Shipping to Japan Only. For ...
-
Condition：
-
93% B
-
Exakta - Alpa Adapter Exabag
Exakta Bug. This is an Alpa-made lens mount adapter that converts Exakta mount lenses to Alpa mount.Though unbranded, it's a genuine Alpa product. For Alpa users, this accessory is irresistible.*Shipping to Japan Only. For oveseas customer, please contact us before order.There is some minor wear from use, but there are no noticeable scratches or dents. It's in a condition that poses no problems...
-
Condition：
-
92% B
-
Rolleinar 1 (RIII)
Close-up lens for Rolleiflex 2.8F and similar models, RIII, Bayonet III. It attaches to the inner bayonet of the RIII. When attached, it allows for close-up shooting from 47 to 100 cm. The price includes shipping.*Shipping to Japan Only. For overseas customer, please contact us before order.There are signs of mounting and dismounting on the mount part of the taking lens, but the rest of the ext...
-
Condition：
-
94% A
-
Nikkor 50mm f2 (S)
Nikkor-H 5cm f2, a standard lens for the Nikon S series. It features a Sonnar-type construction with 3 groups and 6 elements. A perfect match for later models of the Nikon S2 with the black dial.At wide open, it produces soft images, but stopping down by about two stops reveals the sharp and crisp rendering typical of Nikkor lenses. It can also be used with mirrorless cameras via an adapter!The...
-
Condition：
-
93% B
-
Leitz Rangefinder FODIS Black
Vertical rangefinder by Leitz, product cord is FODIS. This is an early type with a small distance dial, finished in black/nickel and marked in meters. It features a five-digit serial number, dating back to the 1920s.With a baseline length of 83mm, it provides quite accurate measurements. The minimum measuring distance is 1m, same to internal rangefinders from the DII era onwards.Standing tall o...
-
Condition：
-
93% B
-
Leitz A36 山高 Cap Chrome
Leitz geninue A36 lens cap. This item is made of brass with a shiny chrome-plated finish. Does not have velvet lining on the inside of the cap. It is especially useful when small diameter filters are attached to the 36mm Elmar 50mm f3.5 or the Hektor 50mm f2.5 lenses. This cap is quite hard to come by.It is an extremely clean cap with hardly any signs of wear or scratches. Of course, there is ...
-
Condition：
-
94% A
-
Leitz 35mm Finder SBLOO
Leica's classic 35mm viewfinder, SBLOO. This unit features the early hexagonal Leitz logo and was released in 1951.It offers a sparkling view that reveals details not visible through built-in viewfinders. It's a wonderful item that enhances the mood whether used on Barnack Leicas without a 35mm frame or on Leica bodies with integrated frames.Once you experience this viewfinder, you might find b...
-
Condition：
-
92% BC
-
Leitz 35mm Finder SBLOO
SBLOO / 12010. A classic 35mm viewfinder by Leica. This unit features the Leitz logo in cursive and the later flat-footed attachment type.Looking through it offers a sparkling view of the world. It elevates the experience not only for Barnack and Leica M3 without frame lines but also for Leica with built-in frame lines!There are a few very light scratches on the side and top, and some scratches...
-
Condition：
-
93% B
-
Hasselblad A16 Magazine
Hasselblad V-series A16 Magazine. Manufactured in 1977. Uses 120 film, allowing for 16 exposures in 6x4.5 format.While Hasselblad is known for its 12-exposure 6x6 format magazines, the A16 is for those who want to enjoy Hasselblad's imaging capabilities in both portrait and landscape orientations!It has minimal signs of use and is in very good cosmetic condition. The mating surfaces with the ca...
-
Condition：
-
95% Mint
- Choosing a selection results in a full page refresh.
- Opens in a new window.
