Skip to content
Leica
-
Xenon 50mm f1.5 Lens Hood XIOOM New York Leitz
Collapsible hood for Xenon produced by Leitz New York. XIOOM. Black paint finish. Chrome plated clamping screw type and early model.
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
This is a genuine Leica lens hood made for the earliest version of the Summilux 35mm f1.4, commonly known as the Steel Rim. The earlier designation was OLLUX, but this particular piece is the third version, marked 12522H. For reference, versions 1 and 2 are engraved OLLUX, while the following version 4 is marked 12522.The beloved first-generation spherical Summilux 35mm f1.4, affectionately kno...
-
Condition：
-
97% Like New
-
Leitz Rangefinder FODIS Black
Leitz vertical rangefinder FODIS. Early type with a small-diameter distance dial. Distance scale in feet. Minimum focusing distance is 3 feet (about 1 m). Features a five-digit serial engraving. Manufactured in the 1920s.The black-painted body is complemented by a nickel-plated dial, and the silver inlaid hexagonal E. Leitz logo adds a touch of elegance. A masterpiece that embodies the precisio...
-
Condition：
-
94% A
-
Leitz VIDOM Finder VIOOH + TUVOO
Leitz upright viewfinder VIOOH, black/chrome finish. A standard Leitz viewfinder produced over a long period from around 1938 to 1964. Features frame selection for 35/50/85/90/135mm. Parallax correction is marked in meters. When you change the focal length while looking through it, the frame narrows dramatically, giving it a distinctly cyber-like feel.This example comes with the rare 28mm attac...
-
Condition：
-
94% A
-
Leitz Lens Hood 12585
*Shipping to Japan only. For overseas customers, please contact us before placing an order.Leitz 12585 lens hood. This genuine hood was supplied during the era of the 2nd generation Summicron 50mm and 35mm, serving as the successor to the ITDOO and IROOA hoods.It is a standard hood compatible with many E39 diameter lenses, including the Summicron 35mm f2 and 50mm f2, as well as the Summaron and...
-
Condition：
-
96% Mint
-
Leica M10 Hand Grip 24018
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a dedicated handgrip for the Leica M10 series in black chrome finish, product code 24018.The original baseplate is removed and replaced with this grip, significantly enhancing stability when held in hand.A finger loop is included, which can be attached to the screw hole on the side of the grip to provide an e...
-
Condition：
-
95% Mint
-
Leitz Strap 14092
Genuine Leica leather strap, product code 14092. This model features thinner leather for added suppleness. As expected from Leitz, no compromises were made, using only high-quality leather. The strap becomes softer and more comfortable with use, while maintaining ample strength. Many users return to this strap after trying others.There are only slight signs of use, with one very small cut in th...
-
Condition：
-
93% B
-
Leitz Lens Hood ITDOO
Leitz lens hood, ITDOO. A classic hood for the Summicron 50mm and Summaron 35mm lenses, featuring a single hook mount. Compared to its successor, the IROOA, the ITDOO has a cleaner, more stylish design. A beautifully minimal accessory, showcasing the excellence of Leitz craftsmanship.There are several variations of the ITDOO, and this one is the standard type with lens names engraved. In the ea...
-
Condition：
-
94% A
-
Leitz Rangefinder FOKOS Chrome
¥25,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz vertical rangefinder FOKOS in chrome finish. This is a later model produced after 1949, and appears to be the final version with the Leitz hexagonal logo engraved facing upward. The product code is FOKOS, later changed to 14011. Distance scale is in feet.Unlike the horizontal rangefinder HFOOK which includes an...
-
Condition：
-
93% A
-
Leica M11 Hand Grip 24025
*Shipping to Japan Only. For overseas customer, please contact us before order.Handgrip for Leica M11. Finished in matte black paint to perfectly match the Leica M11 Black. Leica product code is 24025.When attached, it provides a more stable grip on the camera, especially useful for vertical shots or one-handed shooting.The bottom features a rubber-covered flap that opens for easy access to the...
-
Condition：
-
96% Mint
-
なにがし サムレスト M 真鍮素地 ライカ M10 / M11用
¥32,200
*Shipping to Japan Only.
-
Condition：
-
100% Brand New
-
なにがし サムレスト M ブラック 黒染め ライカ M10 / M11用
¥36,600
*Shipping to Japan Only.
-
Condition：
-
100% Brand New
-
なにがし サムレスト M ブラックペイント ライカ M10 / M11用
¥39,900
*Shipping to Japan Only.
-
Condition：
-
100% Brand New
-
なにがし サムレスト M 銀漆 シルバー ライカ M10 / M11用
¥36,600
*Shipping to Japan Only.
-
Condition：
-
100% Brand New
-
Summaron 28mm f5.6 Lens Hood SOOBK
Lens hood for the Red Scale Summaron 28mm f5.6. Leica product code is SOOBK, later changed to 12500Y. A36 slip-on hood.A finely crafted hood with a wrinkle black enamel finish. Though expensive, its compact yet commanding presence when mounted on the Red Summaron makes it highly desirable and satisfying to own.A must-have item for those who own the Red Summaron. The real question is, which came...
-
Condition：
-
94% A
-
Leitz Lens Hood OLLUX
¥220,000
Lens hood specifically designed for the Summilux 35mm f1.4 1st version, commonly known as the Steel Rim. This hood is called OLLUX, with a later product code of 12522H. This particular piece is the earlier version engraved with OLLUX, which was later renamed to 12522. Moreover, it is the second variation among the OLLUX-marked hoods, featuring engraved arrows on both sides.With its stylish desi...
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH Black
A black paint version of the FOOKH lens hood, designed for Summaron 35mm, Elmar 35mm, and similar lenses. It features a chrome retaining screw and fits 36mm slip-on mounts.Though simple in design, the hood has an exceptionally well-balanced shape that complements both nickel and chrome lenses. Many users also use it with Elmar 50mm lenses.A similar hood is the earlier FLQOO, made for the first-...
-
Condition：
-
92% BC
-
Leitz Lens Hood FLQOO N.Y. Leitz
FLQOO lens hood made by Leitz New York. Black paint finish on brass with chrome screw. A36 size.Dimensions are nearly identical to the German-made FLQOO, but the engraving marking it for the Elmar 50mm is perhaps the most notable difference.It can also be used with the Elmar 35mm and Summaron 35mm lenses, not just the Elmar 50mm.Compared to the original German FLQOO, the front rim is thinner, a...
-
Condition：
-
93% B
-
Leica Visoflex 2
Visoflex 2 is an electronic viewfinder compatible with the Leica M10 and M11 series. Leica's product code is 24028.It features a high-resolution 3.7 million-dot OLED display that delivers vivid colors and a large, detailed viewing experience. An integrated eye sensor automatically switches the display on and off. The unit includes a diopter adjustment dial, and the angle of the finder itself ca...
-
Condition：
-
96% Mint
-
Leitz 35mm Finder SBLOO
Leica’s classic external 35mm viewfinder, the SBLOO. This is an early version featuring the hexagonal Leitz logo, released in 1951.A masterpiece among Leitz finders, offering a brilliant and luminous viewing experience.An excellent accessory not only for Barnack Leicas or the M3, which lack a built-in 35mm frame, but even for later models with built-in framelines—it instantly elevates the shoot...
-
Condition：
-
95% Mint
-
Leitz Visoflex / Leicaflex Adapter 14127
¥11,000
*Shipping to Japan Only.
-
Condition：
-
92% B
-
Rayqual L/M Adapter 28/90mm L Black
¥7,000
*Shipping to Japan only. For overseas customers, please contact us before placing an order.
-
Condition：
-
95% A
-
Rayqual Mount Adapter EXA - LM
*Shipping to Japan only. For overseas customers, please contact us before placing an order.
-
Condition：
-
97% Like New
-
Leitz Aperture Ring VOOLA
*Shipping to Japan Only.
-
Condition：
-
94% A
-
Leica L/M adapter 35/135mm
*Ship to Japan Only. For overseas customer, please contact us before order.
-
Condition：
-
95% Mint
-
Leitz Tripod Head KGOON
*Shipping to Japan Only.Leitz medium-sized ball head. A universal type compatible with both large and small tripod screws on both the male and female sides. Engraved with the letter D, the mark of this versatile head—commonly known as the D head.It features an astonishing mechanism where the screw size automatically switches via a spring-loaded system when different equipment is mounted. A prim...
-
Condition：
-
92% B
-
Leitz Tripod TOOUG
Early model of the Leitz tabletop tripod. The product code is TOOUG, later changed to 14100. Features the old E. LEITZ logo and a large thread screw.The tripod body is made of cast aluminum with an exquisite hammered finish. It is crafted with the exceptional precision typical of Leitz, offering a remarkably satisfying handling feel. Locks firmly in place with minimal effort.A true Leitz access...
-
Condition：
-
94% A
-
Leitz Hand Strap TROOV
A genuine leather hand strap by Leitz, model TROOV, introduced in 1938. It dates back to the era of the Leica IIIa and features a large tripod screw.There is no Leitz logo found anywhere on it, and most were likely discarded over time, making this strap quite rare today.As expected from a genuine Leitz product, the quality of the tripod screw, snap fastener, and leather is outstanding. The leat...
-
Condition：
-
91% C
-
Leitz Strap 14092
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica genuine leather strap, model 14092. This version features thinner leather for a more supple and flexible feel. As expected from Leitz, even the strap reflects their uncompromising quality, crafted from high-grade leather. It becomes softer and more comfortable with use while maintaining sufficient strength. Man...
-
Condition：
-
94% A
-
Leitz 28mm Finder SLOOZ Black
¥48,000
Leitz original metal 28mm viewfinder, SLOOZ. Later designated as code 12007. This one is finished in black chrome. A perfect match for lenses like the Elmarit 28mm or red-scale Summaron.Not only does it pair well with black chrome bodies, but it also complements black paint bodies beautifully.There are only minimal signs of wear, and the finder remains in exceptionally clean condition with bare...
-
Condition：
-
95% Mint
-
Leitz Lens Hood OLLUX
Dedicated hood for the legendary Summilux 35mm f1.4 1st, commonly known as the Steel Rim. This hood is renowned not only for its function but also for its elegant appearance when mounted. Leica product code is OLLUX, and the later code is 12522H. Often referred to as Ollux in the collector community.This item is the early version with the OLLUX engraving (later versions are marked 12522H), spec...
-
Condition：
-
95% Mint
-
Leica Meter MR Black Paint
Leica Meter MR-4 in black paint finish. A CdS-type exposure meter, catalog number 14218 from Leitz.It attaches to the top plate of M-series Leica cameras and couples with the shutter speed dial for synchronized exposure readings.With the MR-4 model, the ON/OFF switch no longer interferes with the M4’s rewind crank.This particular unit shows minimal signs of use, and the black paint retains a ma...
-
Condition：
-
93% B
-
Leitz 50mm Finder SBOOI
Leitz's classic 50mm viewfinder. Product code is SBOOI, later changed to 12015.This example is a later model with the 50mm marking and large capital-letter engraving, giving it a more modern appearance.Like many of Leitz's standard accessories, the SBOOI has more than eight known variations. This particular one features knurled grips on both sides for slip resistance, a black-painted eyepiece s...
-
Condition：
-
98% Like New
-
Leitz 35mm Finder SBLOO
Leica’s classic external 35mm finder, SBLOO. This particular piece is an early version with the hexagonal Leitz logo, released in 1951.A masterpiece among Leitz finders, offering a brilliantly clear view.Not only ideal for Barnack Leicas or the M3, which lack a built-in 35mm frame, but also a joy to mount even on models that do—just attaching it instantly lifts your spirits.A brilliant accessor...
-
Condition：
-
96% Mint
-
Leica Visoflex 2
*Shipping to Japan Only. For overseas customer, please contact us before order.Electronic viewfinder Visoflex 2, compatible with Leica M10 and M11 series. Leica product code is 24028.It features a high-resolution 3.7-million-dot OLED display that offers a large, vivid view with rich color depth.Equipped with an eye sensor that automatically turns the display on or off, and a diopter adjustment ...
-
Condition：
-
94% A
-
Leitz Rangefinder Filter OKARO
*Shipping to Japan only. For overseas customers, please contact us before placing an order.The Leitz product code is OKARO, later changed to 14058. This is a rangefinder filter for Leica IIIb, IIIc, IIId, and IIIf.When attached, the rangefinder's double image turns orange, enhancing contrast and making focusing easier.A modest but highly practical accessory.Both the frame and the glass are in e...
-
Condition：
-
94% A
-
Leica M Typ240
11770. Leica M Typ240 in black paint finish. This is the third-generation model in Leica’s digital M lineup. Unlike the M9 and earlier models which used CCD sensors, the M240 features a CMOS sensor, enabling live view and video recording capabilities.At our store, we have used multiple units of the M240 extensively as demo models. Its neutral color rendering, long-lasting battery, and robust, r...
-
Condition：
-
92% B
-
Leitz Lens Hood IWKOO
Super-Angulon 21mm f4 lens hood. Leica product code is IWKOO / 12502N.This is the later version engraved with 12502N.A beautifully designed hood that looks excellent when mounted on the lens.The item shows only the slightest signs of use and has an exceptionally clean appearance.The black-painted hood section has a small spot of paint loss at the tip, but overall it is in barely used condition....
-
Condition：
-
95% Mint
-
Leitz Rangefinder FOKOS Chrome
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz vertical rangefinder FOKOS in chrome finish. This is the later version produced after 1949, and among those, it appears to be the final type with the hexagonal Leitz logo oriented upward. The product code is FOKOS, later changed to 14011. Distance scale is in meters.It is a vertical type rangefinder like the ea...
-
Condition：
-
93% B
-
Leica M3 Case
*Shipping to Japan Only. For overseas customer, please contact us before order.Late-model Leica M3 and M2 era original leather case by Leitz. Catalog number is IDCWO. The tripod screw is the small type.Compared to standard cases, the front section protrudes less, making it suitable for collapsible Elmar and collapsible Summicron lenses. It can also accommodate Summaron 35mm and 8-element Summic...
-
Condition：
-
93% B
-
Leica M5 Case 14544
*Shipping to Japan Only.
-
Condition：
-
93% B
-
Leicavit for Leica IIIf / IIIg SYOOM
¥110,000
The Leica Rapid Winder SYOOM for IIIf and IIIg, following the Leica Pistol, is a quick-wind attachment.By pulling the trigger, the film can be advanced swiftly—much faster than turning the knob on the camera body—allowing you to capture the decisive moment without taking your eye off the viewfinder.It was a must-have tool for press photographers of the time.At first glance, it looks like a simp...
-
Condition：
-
93% B
-
Leitz 50mm Finder SBOOI
A classic 50mm finder for Leica. Product code is SBOOI, later changed to 12015.A masterpiece by Leitz, known for its simple functional beauty and outstanding clarity.This example features the 5cm marking and is an early version with lowercase engraving.There are nearly eight known variations of the SBOOI, and this one has a black-painted eyepiece, a single grub screw on the shoe, and knurled gr...
-
Condition：
-
92% B
-
Leitz Filter Adapter SOOGZ
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz filter adapter ring, SOOGZ / 13154. This allows you to mount E39 filters onto A36 lenses.Specifically, it enables the use of E39 filters from lenses like the Summicron on A36 lenses such as the Elmar 50mm f3.5, Hektor 50mm f2.5, Summar 50mm f2, Summaron 35mm f3.5, and Elmar 35mm f3.5.Its charming design feature...
-
Condition：
-
95% Mint
-
FB-07 Flashback Lens Hood 銀漆 for Elmar 50mm
*Shipping to Japan only. For overseas customers, please contact us before placing an order.FB-07 Custom Lens Hood for Elmar (A36) – Silver Screw Version.This is our original lens hood, designed specifically for A36-mount Elmar 50mm lenses. This particular item is a gently used unit with minimal signs of wear. The retaining screw features the silver lacquer version.A truly unique hood with integ...
-
Condition：
-
93% B
-
FB-05 Summilux 35mm f1.4 Steel Rim Lens Cap
¥4,000
Lens cap for Steel Rim. Flashback Camera's orignal product.New condition. Made in Japan. *Shipping to Japan only. For oversea customers, please contact us before order.
-
Condition：
-
100% Brand New
-
FB-08 真鍮黒染 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw painted in black. Black oxide finish. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
FB-08 真鍮素地 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw wtih no paint. Bare brass. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
FB-08 銀漆 Flashback Hood Screw
Specially designed for Flashback Lens Hood FB-07 and FB-10. Set screw lacquered in silver. With initial logo mark of Flashback Camera . Made in Japan. *Ship to Japan Only.
-
Condition：
-
100% Brand New
-
Leica UVa Filter E39 Chrome 13132
*Shipping to Japan only. For overseas customer, please contact us before order
-
Condition：
-
96% Mint
-
Leitz L/M Adapter 90mm
*Shipping to Japan Only.
-
Condition：
-
93% AB
-
Leitz L/M Adapter 50mm
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
93% B
-
Leitz L/M Adapter 50mm
*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
94% A
-
Leitz Lens Hood FIKUS
¥13,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica’s zoom lens hood for 35/50/90/135mm lenses — the FIKUS. Designed for 36mm slip-on mounts (A36). This version features the earlier, simpler engraving style up to Elmar 5cm. While unmarked, when the outer hood is fully retracted, it can also accommodate the Elmar 35mm and Hektor 50mm lenses.The FIKUS hood was int...
-
Condition：
-
93% B
-
Cook & Perkins Hood for Elmar 50mm f3.5
Rare lens hood from Cook&Perkins, England. Fits with screw stopper. Move the apature ring with this hood. Light weight, made of aluminum. Very good condition for use and also collection! *The camera and lens are not included.
-
Condition：
-
93% B
-
FB-07 真鍮黒染 Elmar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.Our original Elmar lens hood, the FB-07. The retaining screw is made of blackened brass. This particular item is in like-new condition with no signs of use.A lens hood with an aperture control feature—something that surprisingly didn’t exist until now. Designed for A36 diameter Elmar 50mm lenses, it is compatible wit...
-
Condition：
-
96% Mint
-
Leitz Lens Hood ITDOO Early
¥52,000
Early version of the ITDOO. A rare plastic model with a single hook. The metal base of the hood is engraved with Summaron 3.5cm and Summicron 5cm in slightly smaller letters than those found on later ITDOO versions.This plastic hood offers a bit of a thrill—set it down too hard and it might crack. A perfect piece for those who appreciate something a little out of the ordinary. Also a great addi...
-
Condition：
-
93% B
-
Leitz 21mm Finder SBKOO Chrome
¥55,000
Leitz 21mm viewfinder with chrome finish. Product code is SBKOO, later updated to 12002. Released in 1960.Perfect companion for the Super-Angulon 21mm, Elmarit 21mm, and similar lenses.There are light scuffs on the base including the shoe, and some glossiness on the edges, but the top surface remains clean with no noticeable wear.The glass was cleaned in May 2025. There is a small chip on the l...
-
Condition：
-
94% A
-
Leitz Lens Hood IUFOO
¥20,000
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz hood for medium telephoto lenses with E39 thread, model IUFOO (12575). Compatible with Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.This example features a single hook. The design was later updated to a double hook, and over its long production run, various ver...
-
Condition：
-
96% Mint
-
Leitz Film Template ABLON Nickel
¥27,000
*Shipping to Japan Only. For overseas customer, please contact us before order.A genuine Leitz film template (film trimmer). This is the later version in nickel finish.A handy accessory used to cut film for Barnack Leica cameras. Leitz code ABLON, later changed to 14126. Manufactured from 1931 to 1964.A beautifully crafted accessory that embodies the very essence of Leica—one can't help but adm...
-
Condition：
-
90% C
- Choosing a selection results in a full page refresh.
- Opens in a new window.
