Skip to content
ACCESSORY
-
Leicavit MP Black Paint
Leica Bit MP Black Paint. Leica code SYOOM-M, SMYOM, or 14018.This is a film winding mechanism compatible with Leica M2, M1, MD, and Leica MP. This particular unit is a rare original black paint version.It is an early model with three-line engravings on the back. The sight of it mounted on a Leica M2 Black Paint or similar always captivates.There is a very minor dent on one corner of the bottom...
-
Condition：
-
93% B
-
Summicron 50mm f2 Lens Hood VTROO
*Shipping to Japan Only.A lens hood for the rigid Summicron (both early and late versions) for enlarging purposes, introduced in 1956. The Leitz product code is VTROO, later updated to 16686. Although not its original purpose, it can also be used as a hood with aperture control functionality, similar to the VALOO for the Elmar 50mm.(Installation Instructions)1. Insert the two protruding parts o...
-
Condition：
-
93% B
-
Leitz A36 山高 Cap Black
A cap that covers the Elmar 50mm f3.5 with a 36mm diameter filter attached.This item is made of brass with black paint and features velvet on the back. It is quite hard to find.Considering it has been over 90 years since its manufacture, it is in remarkably good condition.There is minor deterioration of the paint due to aging, but there is almost no noticeable wear from use. The velvet on the b...
-
Condition：
-
94% A
-
Leitz Yellow Filter E41
*Shipping to Japan only. XOOQG. The later code is 13160. E41 diameter Yellow Filter No.1.Originally for the Summarit 50mm f1.5, it is also compatible with the Xenon 50mm f1.5 and the first-generation Summilux 35mm f1.4 Steel Rim.Price includes domestic shipping.The glass has a few very faint cleaning marks. The filter frame shows almost no signs of use and is in good condition. It comes with th...
-
Condition：
-
95% Mint
-
Leitz Sports Finder RASAL Black
eitz Sports Finder RASAL. This is a black paint version. It comes with frames for 35mm, 50mm, 73mm, 90mm, and 105mm. The objective section features a rotating axis that allows you to change the focal length, showcasing its superb craftsmanship. By adjusting the height of the eyepiece, it also accommodates parallax correction. Distance scale is in feet.The RASAL finder is composed of two parts: ...
-
Condition：
-
94% A
-
Leitz Lens Hood FIKUS Nickel
Leica Zoom Hood for 35/50/90/135mm, FIKUS. Rare nickel-plated finish. 36mm slip-on. This item features engravings for both Hektor and Summar.When the outer hood is fully retracted, it is compatible with the Elmar 35mm f3.5.The Ernst Leitz Wetzlar engraving is inlaid in silver. There is also a Germany engraving.The matte paint on the inside of the hood shows some signs of use, but otherwise, the...
-
Condition：
-
93% A
-
Leitz UVa Filter E41
*Shipping to Japan only.
-
Condition：
-
94% A
-
Leitz Green Filter E43
*Shipping to Japan only. For overseas customer, please contact us before order.A green filter for the Summilux 50mm f1.4. Specifically designed to be thin to avoid interference when the XOOIM or 12521G hood is attached. Price includes domestic shipping.Both the glass and filter frame are in excellent condition.
-
Condition：
-
95% Mint
-
Leitz SL Filter E39 New York
*Shipping to Japan Only.
-
Condition：
-
94% A
-
Leitz Tripod Head KGOON
¥18,000
The medium-sized ball head by Leitz, product code KGOON, later changed to 14115, with the E. Leitz hexagon logo. Both the male and female sides have a small screw.This model has been manufactured since 1936, with changes made over time. This particular piece is the fourth version, which has an added horizontal bar under the base for finger support, making it easier to attach the camera.It can b...
-
Condition：
-
92% C
-
Leitz VIDOM Finder VIOOH
Leitz's right-angle VIDOM viewfinder, VIOOH. Black/chrome. It was produced for a long period from around 1938 to 1964.It features frame switching for 35/50/85/90/135mm focal lengths. As you change the focal length while looking through it, the frame narrows in a very cyber and cool manner. Parallax correction is marked in feet.This is a clean right-angle VIDOM in terms of both appearance and gl...
-
Condition：
-
93% B
-
Leitz VIDOM Finder VIOOH
Leitz's right-angle VIOOH viewfinder. Black/chrome. It was produced for a long time from around 1938 to 1964.It has frame switching for 35/50/85/90/135mm focal lengths. As you change the focal length while looking through it, the frame narrows in a very cyber and cool manner. Parallax correction is marked in meters.There are small hand-engraved characters under the shoe mount. Although there ar...
-
Condition：
-
93% B
-
Leitz UVa Filter E43
Chrome-finished UVa filter for Summilux 50mm f/1.4. A perfect match for a noble lady. The Leitz code is YMZOO, later 13206. It has the ERNST LEITZ WETZLAR engraving and red-lettered U.V.a. engraving. With a diameter of E43, it is a 43mm screw-in filter. It is compatible with the spherical Summilux 50mm f/1.4. Specifically designed to be extremely thin, this filter is necessary when attaching th...
-
Condition：
-
93% B
-
Ducati Lens Hood for Vitor 35mm f3.5
Italian-made 35mm half-frame camera standard lens hood for the Ducati Sogno and Simplex, Vitor 35mm f3.5. Ducati product code: OI 3401.1. Made of aluminum.This is a slim and charming hood. All Ducati accessories are exceptionally well-made and highly collectible.It shows almost no signs of use and is very clean.The original box is included. A rare item.
-
Condition：
-
95% Mint
-
Ducati Filter Set
UV and yellow filter set for Ducati Sogno and Simplex's Vitor 35mm and Etar 35mm lenses.Ducati product codes: UV filter is 2401.1, and yellow filter is 2401.3.The filters are screw-in type with internal threads. The design of the knurled outer ring on the tip of the Vitor lens serves as the threading mechanism.While similar internal screw-in filters are also found on lenses from Zeiss and Voigt...
-
Condition：
-
93% B
-
Leitz Filter Adapter SOOGZ
Leitz filter adapter ring. It allows mounting an E39 filter onto an A36 lens. Leitz product code: SOOGZ / 13154. It features a charming design with screws protruding unexpectedly.Specifically, it enables A36 lenses such as Elmar 50mm f3.5, Hektor 50mm f2.5, Summar 50mm f2, Summaron 35mm f3.5, Elmar 35mm f3.5, and others with an outer diameter of 36mm (A36) to use E39 filters with an inner diame...
-
Condition：
-
95% Mint
-
Leitz Close-up Attachment ADVOO
Close-up Attachment for Leica IIIg, ADVOO. Later product code is 16503. Introduced in 1959.The Leica IIIg, the last model of the Barnack Leica series, has a taller body compared to previous models like the IIIf, making SOOKY and NOOKY unusable. This ADVOO attachment is a luxurious tool created solely for the IIIg, showcasing the opulence typical of Leitz. Manufactured during the golden age of p...
-
Condition：
-
95% Mint
-
Leitz Lens Hood 12585H
Leitz 12585H lens hood. This is the genuine hood from the second generation of Summicron 35mm and 50mm lenses, fitting most E39 diameter lenses. It succeeded the IROOA hood.It's a classic hood that can be used with lenses like the Summicron 35mm f2, 50mm f2, and others, including Summaron and Elmar lenses. This specific hood is a later type marked for the 35/2 lens.*Shipping to Japan Only. For ...
-
Condition：
-
93% B
-
Exakta - Alpa Adapter Exabag
Exakta Bug. This is an Alpa-made lens mount adapter that converts Exakta mount lenses to Alpa mount.Though unbranded, it's a genuine Alpa product. For Alpa users, this accessory is irresistible.*Shipping to Japan Only. For oveseas customer, please contact us before order.There is some minor wear from use, but there are no noticeable scratches or dents. It's in a condition that poses no problems...
-
Condition：
-
92% B
-
Rolleinar 1 (RIII)
Close-up lens for Rolleiflex 2.8F and similar models, RIII, Bayonet III. It attaches to the inner bayonet of the RIII. When attached, it allows for close-up shooting from 47 to 100 cm. The price includes shipping.*Shipping to Japan Only. For overseas customer, please contact us before order.There are signs of mounting and dismounting on the mount part of the taking lens, but the rest of the ext...
-
Condition：
-
94% A
-
Nikkor 50mm f2 (S)
Nikkor-H 5cm f2, a standard lens for the Nikon S series. It features a Sonnar-type construction with 3 groups and 6 elements. A perfect match for later models of the Nikon S2 with the black dial.At wide open, it produces soft images, but stopping down by about two stops reveals the sharp and crisp rendering typical of Nikkor lenses. It can also be used with mirrorless cameras via an adapter!The...
-
Condition：
-
93% B
-
Leitz Rangefinder FODIS Black
Vertical rangefinder by Leitz, product cord is FODIS. This is an early type with a small distance dial, finished in black/nickel and marked in meters. It features a five-digit serial number, dating back to the 1920s.With a baseline length of 83mm, it provides quite accurate measurements. The minimum measuring distance is 1m, same to internal rangefinders from the DII era onwards.Standing tall o...
-
Condition：
-
93% B
-
Leitz A36 山高 Cap Chrome
Leitz geninue A36 lens cap. This item is made of brass with a shiny chrome-plated finish. Does not have velvet lining on the inside of the cap. It is especially useful when small diameter filters are attached to the 36mm Elmar 50mm f3.5 or the Hektor 50mm f2.5 lenses. This cap is quite hard to come by.It is an extremely clean cap with hardly any signs of wear or scratches. Of course, there is ...
-
Condition：
-
94% A
-
Hasselblad A16 Magazine
Hasselblad V-series A16 Magazine. Manufactured in 1977. Uses 120 film, allowing for 16 exposures in 6x4.5 format.While Hasselblad is known for its 12-exposure 6x6 format magazines, the A16 is for those who want to enjoy Hasselblad's imaging capabilities in both portrait and landscape orientations!It has minimal signs of use and is in very good cosmetic condition. The mating surfaces with the ca...
-
Condition：
-
95% Mint
-
Hasselblad Lens Hood 80
Lens hood for Hasselblad Planar 80mm lens. Made of light weight plastic.*Shipping to Japan Only. For overseas customer, please contact us before order.There are minor signs of use such as slight scratches, but no cracks are visible. It's in a good condition for practical use. Price includes tax and domestic shipping.
-
Condition：
-
93% B
-
Hasselblad Proxar 1m / 2m set
Proxar for Hasselblad. A set of two close-up lenses for 50 size. Compatible with Planar 80mm lens, etc. When attached to the front of the lens, allows for close-up photography. Made by the renowned Carl Zeiss, Germany. Includes f=1m and f=2m types. This black rim version was manufactured from 1973 to 1988.*Shipping to Japan Only. For overseas customer, please contact us before order.The frames ...
-
Condition：
-
93% B
-
Leitz Series 6 UVa Filter
*Shipping to Japan Only.Leitz Series VI (Series 6) UVa filter, product code 13012 by Leitz. Comes in its original red box. It's in excellent condition!
-
Condition：
-
95% Mint
-
Leitz A36 Filter
A screw-in type Leitz filter with an A36 diameter, suitable for lenses from the late 1920s to early 1930s. The filter frame is black-painted, split into two parts for inserting the filter between them, without retaining screws. There is an 'R' engraving on the side of the filter frame, indicating it was originally for a red filter, but it has been replaced with a clear, non-coated protective fi...
-
Condition：
-
94% A
-
Nikon Zoom Finder
Nippon Kogaku's variable magnification universal finder, later model. It supports five focal lengths: 35mm, 50mm, 85mm, 105mm, and 135mm. The scales without numbers indicate 1x and 1/2x magnification. Parallax correction is adjusted by rotating the outer ring of the eyepiece (previously, it was adjusted using a lever on the base).*Shipping to Japan Only. For overseas customer, please contact us...
-
Condition：
-
91% C
-
Zeiss Universal Finder
436/70. Universal finder made by Carl Zeiss Jena. It is a product from the Contax II era, featuring black paint and chrome finish. The parallax correction is marked in meters. The turret-style finder supports lenses with focal lengths of 28mm, 35mm, 50mm, 85mm, and 135mm.Due to the finder body protruding to the right when viewed from the eyepiece direction, if attached to a Leica, the finder wi...
-
Condition：
-
93% B
-
Tewe Zoom Finder
Zoom finder made by Tewe in Germany. This universal finder was widely used in Europe at the time and can be attached to cameras like Leica and Contax. There were also versions for 24x24 format Robot cameras. Impressively, it supports a variety of lenses: 35mm, 50mm, 75mm, 85mm, 100mm, 135mm, 150mm, 180mm, and 200mm. It features a parallax correction mechanism (marked in feet). Its charming desi...
-
Condition：
-
93% B
-
Leica M3 Case
Leitz original leather case from the era of the late Leica M3 and M2. The Leitz code name is IDCOO. The tripod screw is a fine thread. The "LEITZ WETZLAR GERMANY" stamp is in uppercase letters.Made from high-quality leather, it still retains its original luster even after nearly 60 years since its manufacture. It's remarkable that it has remained in such condition!While there are very minor wri...
-
Condition：
-
93% AB
-
Leitz Lens Hood FLQOO Black
Hood for Elmar 35mm f3.5, FLQOO. Slip-on type for A36. Black paint on brass, with a chrome retaining screw. The engraving is not inlaid but filled with white.Although designed for the Elmar 35mm, it can also be used with lenses like the Summaron 35mm. It is a very stylish hood. Its simple design also matches well with lenses like the Elmar 50mm.A rare item.There is a spot on the base of the hoo...
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
FLQOO. Hood for Elmar 35mm f3.5. A36. The retaining screw is chrome. The appearance is similar to the successor FOOKH, but the diameter and length are different. Its simple design enhances the look of your lens. As expected from Leitz.This item has an aluminum front end and features rare white paint markings instead of inlaid engravings. Similar models exist from N.Y. Leitz, but this one is mad...
-
Condition：
-
93% B
-
Summaron 28mm f5.6 Lens Hood SOOBK
12500Y. The old Leitz code is SOOBK. Lens hood for Summaron 28mm f5.6 (Red Summaron). A36 slip-on.A splendid hood with crinkle finish. Although it is quite an expensive hood, its appearance when mounted on the Red Summaron is compact yet imposing. For those who own or plan to purchase the Red Summaron, this is a must-have item. Which comes first, the lens or the hood? (LoL)There is some paint ...
-
Condition：
-
93% B
-
Hektor 28mm f6.3 Lens Hood SOOHN
Hood for Hektor 2.8cm f6.3. Leitz product code is SOOHN. The retaining screw is chrome. Made by Leitz in Germany. 36mm slip-on.The clean and simple trumpet-shaped design is a masterpiece hood that enhances your camera and lens. For those using the uncoated Hektor 28mm, this is an essential item.The white engravings are well-balanced and, combined with the attractive design, create a beautiful a...
-
Condition：
-
92% BC
-
Nikkor 28mm f3.5 Lens Hood Chrome
A rare item, a hood for the Nikkor 28mm f3.5 with Nikon S mount. This is an early chrome-finished model. It is believed to have been supplied with the white barrel lens that appeared in 1952.Screw-in type. It has a two-piece structure, allowing a Series 7 filter to be sandwiched in between. The front part is matte chrome, and the rear part is gloss chrome.As is generally the case with Nikkor wi...
-
Condition：
-
97% Like New
-
Nikkor 28mm f3.5 Lens Hood Black
Rare item. Late model hood for the Nikkor 28mm f3.5 with Nikon S mount. Unlike the early chrome-finished model, this late model matches the black barrel of the later lenses with a two-tone finish of black paint and glossy chrome plating.Screw-in type. It has a two-piece structure, allowing a Series 7 filter to be sandwiched in between. The finish is exceptionally high-quality and beautiful.As w...
-
Condition：
-
94% A
-
Janua Lens Hood
*Shipping to Japan Only.Genuine hood for the Leica-style camera Janua, made by San Giorgio in Italy. 36mm slip-on. Manufactured around 1949.Although the Janua has a dedicated bayonet mount and cannot be strictly called a Leica copy, it is a very unique and charming camera in both style and mechanism. In addition to the Essegi 50mm f3.5, lenses such as the Kritios 50mm f2 and f2.8 were developed...
-
Condition：
-
93% B
-
Leitz Lens Hood OLLUX
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 Early type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.There are minor paint chips observed on the front edges of the hood, but it's in a condition suitable for practical use without any concerns.
-
Condition：
-
92% B
-
Leitz Lens Hood OLLUX
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 Early type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.Slightly used and faint paint peels on edges. Good fitting to Steel Rim.
-
Condition：
-
93% B
-
Leitz Tripod Head FOOMI
FOOMI / 14105. Leitz small-size tripod head. Universal type for both 1/4 and 3/8 tripod thread. Amazingly high quality product. @copy@Faint signs of use found. Good for use. Good working condition.*Shipping to Japan only. For overseas customer, please contact us before order.
-
Condition：
-
93% B
-
Hektor 73mm f1.9 UV FIlter FIWET
*Shipping to Japan Only. For overseas customer, please contact us before order.Genuine UV filter for Hektor 73mm f1.9, 39mm screw-in type. The Leitz product code is FIWET.This UV filter, from the era of black-and-white photography, has a strong yellow tint and is not suitable for color photography. For color, please use the later UVa filters.Additionally, there is also a slip-on type UV filter ...
-
Condition：
-
92% B
-
Hektor 73mm f1.9 Yellow Filter FIOPY
*Shipping to Japan Only. For overseas customer, please contact us before order.Genuine yellow filter for the Hektor 7.3cm f1.9, with product code FIOPY. It's a slip-on type manufactured around 1933, marked as No.0 and featuring a thin yellow tint.Despite its small size, it's remarkably well-made, with a velvet lining on the back for secure attachment to the lens. It has been confirmed to fit th...
-
Condition：
-
95% Mint
-
Summarit 50mm f1.5 Lens Hood XOONS
Hood for Summilux 50mm f1.5, designated XOONS. It features an impressive construction with brass and black wrinkle paint, providing a substantial feel rarely seen in modern industrial products.This hood can be used not only with the Summilux but also with the Leitz Xenon 50mm lens.While it may appear somewhat grand for a 50mm lens hood, it surprisingly complements the Barnack Leica cameras well...
-
Condition：
-
95% Mint
-
Leitz UVa Filter E41
*Shipping to Japan Only. For overseas customer, please contact us before order.XOOYL / 13205. E41. For the early version of the Summilux 35mm f1.4 with the steel rim. The OLLUX hood can also be used with it. It is also compatible with the Summarit 50mm f1.5, which has the same 41mm screw-in diameter.Both the frame and glass are in excellent condition. This is a somewhat rare filter that is hard...
-
Condition：
-
95% Mint
-
Leitz UVa Filter E39 Black
*Shipping to Japan Only. For overseas customer, please contact us before order.13131A. Genuine Leitz UVa filter. Black frame, E39 diameter, 39mm screw-in. Marked with "LEITZ WETZLAR GERMANY" in white lettering.Perfect for black-painted Summicron or Summilux lenses. Both the frame and glass are in excellent condition. Comes with the original box.
-
Condition：
-
95% Mint
-
Leitz Lens Hood IROOA
IROOA's early model. Slightly longer hood compared to later models. Later designated as 12571J. Designed for lenses with E39 diameter (39mm screw-in).Initially labeled for Summaron 3.5cm and Summicron 5cm, but also suitable for lenses like the Summicron 35mm f2 (8 elements) and Elmar 50mm f2.8.Compatible with various lenses, this simple and stylish design is a reassuring classic from Leica, the...
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON Black
Lens hood for Elmar 50mm, black version of FISON. A36 size.This item is a rare all-aluminum version with black paint. The leaf spring part that attaches to the lens is also made of aluminum. It is very lightweight, weighing approximately 9g. The fastening screw is chrome.The engraving for Elmar 5cm is filled with white paint. A rare item.There is some chipping in the black paint on the leaf spr...
-
Condition：
-
94% A
-
Rollei Lens Hood (RIII)
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Bayonet III, suitable for Rolleiflex 2.8F. It features the old logo engraving, giving it a classic feel.There are slight signs of use on the paint inside the hood, but otherwise, it is a very clean hood. Comes with the case and original box.The price includes domestic shipping charges.
-
Condition：
-
94% A
-
Zeiss Lens Hood 40.5mm for Contax
Made by Zeiss Ikon Stuttgart, post-war. Catalog No. 1119. From the age of Contax IIa/IIIa. Screw-in hood for Sonnar 50mm etc. Used condition. No distortion. No dents.*Shipping to Japan Only.
-
Condition：
-
92% B
-
Canon 50mm f1.2 (L) Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Canon 50mm f1.2 for Leica screw mount. Slip-on type, 58mm diameter. Can also be used with various other lenses.There is some minor paint loss on the upper edge of the hood. Otherwise, there are no significant scratches, making it a rather clean hood.Comes with an original leather case.Price includes dom...
-
Condition：
-
92% C
-
Leitz Tripod head FOOMI
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz product code is FOOMI, later 14105. A compact ball head made by Leitz. Both the male and female threads are the larger type (a fine-thread adapter is included for the tripod side).Following the first compact ball head FIAKU, the product code was changed to FOOMI in 1938, and multiple variations appeared. This p...
-
Condition：
-
92% B
-
Leitz Adapter OUBIO
*Shipping to Japan Only. For overseas customer, please contact us before order.Intermediate Ring for Visoflex, OUBIO. Later code is 16466. This intermediate ring is used to attach Hektor 125mm, Elmar 135mm, Telyt 200mm, 280mm, and 400mm lenses to the Visoflex body. The black crinkle finish is beautiful, showcasing the excellent craftsmanship characteristic of Leitz products.It shows almost no s...
-
Condition：
-
98% Like New
-
Leitz Lens Hood VALOO
The product code from Leitz is VALOO, later designated as 16620. Introduced in 1949, this is a hood originally designed for enlarging purposes, intended to improve aperture control when used with lenses like the Elmar 50mm on enlargers such as Valoy or Focomat, and focusing stages.In practice, it is also usable as a shooting hood, primarily employed today as a hood for the Elmar 50mm lens. Weig...
-
Condition：
-
95% Mint
-
Leitz Rangefinder HFOOK Black / Nickel
HFOOK. Rangefinder with shoe attachment. This model is a standalone rangefinder FOKOS by Leitz with an added movable shoe FOKAB. Black/nickel finish. The distance dial is in meters. The baseline length is 75mm. The minimum focusing distance is 0.75 meters. It is used by attaching it to the accessory shoe.The distance markings are finely graduated. When operating the shutter dial, the rangefinde...
-
Condition：
-
93% B
-
Hasselblad Lens Hood 150
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Hasselblad Zeiss Sonnar C 150mm. Made of metal with a black paint finish.It is marked as 150, but it is compatible with 100mm, 120mm, 150mm, and 250mm lenses. In later years, the marking was changed to 100-250. Note that from 1974 onwards, it was made of plastic.There is minor paint loss on the edges, b...
-
Condition：
-
93% B
-
Leica R - Alpa Adapter Leibag
*Shipping to Japan Only. For overseas customer, please contact us before order.Leibag. This adapter converts Leica R-mount lenses to Alpa mount. It is an original Alpa product with manual aperture control.While some may question the necessity of using R lenses on an Alpa camera, there are certainly those who are looking for this option. This adapter is somewhat rare.There are slight scuffs, but...
-
Condition：
-
93% B
-
Rayqual L/M Adapter 35/135mm LW Chrome
¥8,800
*Shipping to Japan only. For overseas customer, please contact us before order.Rayqual L/M ring adapter for 35mm and 135mm lenses.Machined from brass with a chrome finish.Manufactured by Miyamoto Seisakusho in Nerima, Tokyo. Designed and made in Japan, it is known for its stable quality and high precision craftsmanship. Its precision rivals that of genuine Leitz products, and we use it for test...
-
Condition：
-
100% Brand New
-
Rayqual Mount Adapter SC - LM
*Shipping to Japan Only. For overseas customer, please contact us before order.Rayqual Mount Adapter SC-LM O. For external bayonet lenses.Converts external bayonet mount lenses from RF Contax and Nikon S series to Leica M mount. Enjoy the superb lenses from Contax and Nikkor on your digital Leica M. Not compatible with internal bayonet mounts. No rangefinder coupling.Please note that some lense...
-
Condition：
-
95% Mint
- Choosing a selection results in a full page refresh.
- Opens in a new window.
