Skip to content
ACCESSORY
-
Leitz Lens Hood 12585
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz 12585 lens hood. A genuine hood for the second generation Summicron 50mm and 35mm lenses. Finished in black chrome, it is the successor to the IROOA hood. This particular item is the later version with the 35/2 engraving.A classic hood that can be attached to most lenses with an E39 diameter, making it compatib...
-
Condition：
-
92% B
-
Leitz Lens Hood 12585
¥11,000
*Shipping to Japan Only. For overseas customer, please contact us befor order.The Leitz 12585 lens hood, an original hood from the era of the second-generation Summicron 50mm and 35mm lenses.It is the successor to the ITDOO and IROOA hoods.A true classic, this hood fits most E39-diameter lenses, including the Summicron 35mm f/2, 50mm f/2, as well as the Summaron and Elmar lenses.This particular...
-
Condition：
-
91% C
-
Leica Pistol SCNOO Chrome for Leica IIIc
eica Pistol — Leitz product code: SCNOO.This is a somewhat rare rapid winder designed exclusively for the Leica IIIc, specifically for bodies with serial numbers below 399999.It was manufactured around 1940.For Leica IIIc bodies with serial numbers 400000 and above, the appropriate winder is the Leica Motor SYOOM.Mounting this SCNOO on your IIIc will instantly enhance its aesthetic appeal—an un...
-
Condition：
-
93% B
-
Leitz Tripod Head FIAKU Nickel
An early Leitz compact tripod head—FIAKU. Large thread type. Nickel-plated finish. Believed to be a product from the early 1930s. It locks firmly with just light tightening, showcasing the impressive precision of its machining.This particular unit is a rare variation of the FIAKU, featuring the locking wing screw mounted on the opposite side from the usual design.There are minor scuffs, but no ...
-
Condition：
-
93% B
-
Leica Viewfinder Magnifier M 1.25x 12004
*Shipping to Japan Only. For overseas customer, please contact us before order.Leica magnifier with 1.25x viewfinder magnification. Leica product code: 12004.It greatly assists with precise focusing, especially when using telephoto lenses.Compatible with M-type Leica cameras from the M3 up to the M240, excluding the Leica CL.Please note that it cannot be attached to models from the M10 onward, ...
-
Condition：
-
95% Mint
-
Leitz Filter Adapter SOOGZ E. Leitz N.Y.
*Shipping to Japan Only. For overseas customer, please contact us before order.SOOGZ made by Leitz New York.This is an adapter that allows screw-in E39 filters to be used on A36-type lenses such as the Elmar 50mm f/3.5 or the Wollensak Velostigmat 50mm f/3.5.As is often the case, the Leitz New York version differs in shape and materials from the original German-made ones—making the unique finis...
-
Condition：
-
93% B
-
Schmidt Summarit 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.This lens hood was released under the Actina brand by Schmidt Shokai, the former official Leica distributor in Japan, specifically for the Summarit 50mm lens.It attaches to the lens via a locking screw, and being a slip-on type, it can be mounted with an E41 filter already in place.It weighs approximately 31g (measur...
-
Condition：
-
93% B
-
Actina Summitar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.This lens hood was released under the Actina brand by Schmidt Shokai, the former official Leica distributor in Japan, specifically for the Summitar 50mm f/2 lens.It is a slip-on type with a locking screw. Although not an official Leitz product, it is solidly built and has the refined presence of a genuine accessory. ...
-
Condition：
-
94% A
-
Actina Elmar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a lens hood for collapsible Elmar lenses with an A36 diameter, sold under the Actina name by Schmidt Shokai. Made in Japan.While it may appear to be a copy of the Leitz ITOOY hood, it is actually a unique accessory with a 36mm diameter.It mounts in the same way as the ITDOO or IROOA hoods, offering both ease ...
-
Condition：
-
93% B
-
Actina Elmar 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.A lens hood for collapsible Elmar lenses with an A36 diameter, sold under the Actina name by Schmidt Shokai. Made in Japan.While it appears to be a copy of the Leitz ITOOY hood, it is actually a unique accessory with a 36mm diameter.It attaches in the same manner as the ITDOO or IROOA hoods, offering ease of use and ...
-
Condition：
-
93% B
-
Actina Summicron 50mm Lens Hood
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a lens hood from the Actina brand, produced by Schmidt Shokai, the former official Leica distributor in Japan, for Leica lenses.Compatible with 50mm lenses that accept ITDOO or IROOA hoods, such as E39-mount Summicron or Elmar 50mm f/2.8.The hood can also be mounted in reverse for storage.Slightly heavier tha...
-
Condition：
-
91% C
-
Wallace Heaton Hood for Elmar 50mm f3.5
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens Hood for Elmar 50mm f/3.5 by Wallace Heaton, LondonThis lens hood allows for aperture operation while mounted—compatible even with the engraved aperture scale of prewar Elmars.The aperture values are displayed in the continental system (3.5, 4.5, 6.3, 9, 12.5, 18). Made of aluminum, it is lightweight at approxim...
-
Condition：
-
92% B
-
Leitz Lens Hood FISON
*Shipping to Japan Only. For overseas customer, please contact us before order.Lens hood for Elmar 50mm, FISON. A36 size. Chrome finish. Later renamed with the code 12510.The FISON hood came in various types depending on the era, making it a fascinating accessory for historical research.This particular piece features a design with less curvature at the front edge, giving it a sharper, more defi...
-
Condition：
-
95% Mint
-
Leitz Lens Hood VALOO
*Shipping to Japan Only. For overseas customer, please contact us before order.Leitz product code: VALOO, later changed to 16620.Introduced in 1949, this is an enlarging lens hood originally designed for use with the Elmar 50mm lens on enlargers such as the Valoy and Focomat, or on focusing stages. Its purpose was to improve the ease of aperture operation during enlarging work.In practice, it c...
-
Condition：
-
92% B
-
Leitz Lens Hood IUFOO
*Shipping to Japan Only.The Leitz E39 screw-mount lens hood, IUFOO/12575, is compatible with medium telephoto lenses such as the Elmar 90mm f4, Elmarit 90mm f2.8, Tele-Elmarit 90mm f2.8, Hektor 135mm f4.5, and Elmar 135mm f4.This piece is a single-hook model, whereas later versions feature a double-hook design. It was produced for a long time with various shapes and engravings. This specific ex...
-
Condition：
-
94% A
-
Leica Motor M 14408
*Shipping to Japan only. For overseas customers, please contact us before order.Leica Motor for M-series cameras. Leica catalog number: 14408.When attached to M4-2 and later models such as the M6, M7, and MP, it enables motorized film advance. Designed to maintain the classic aesthetics of the Leica M series, it features a compact form factor and quiet operation. Powered by two CR123A batteries...
-
Condition：
-
94% A
-
Zeiss Lens Hood 40.5mm for Contax
*Shipping to Japan Only. For overseas customer, please conact us before order.Made in postwar West Germany by Zeiss Ikon Stuttgart. Catalog number: 1119. This is a 40.5mm screw-in hood.Compatible with lenses such as the Sonnar 50mm for Contax IIa / IIIa, and can also be mounted on many prewar Zeiss lenses. Fit has been confirmed on the appropriate lenses.There are some signs of wear and light s...
-
Condition：
-
92% B
-
Zeiss Lens Hood 49mm for Contax
*Shipping to Japan Only. For overseas customer, please contact us before order.Made in postwar West Germany by Zeiss Ikon Stuttgart. Catalog number: 1120. This is a 49mm screw-in hood, made of lightweight aluminum with a beautifully refined finish.Designed for the Sonnar 85mm f/2 used on Contax IIa / IIIa cameras. It also fits many prewar Sonnar lenses.Please note: it is not compatible with the...
-
Condition：
-
92% B
-
Summarit 50mm f1.5 Lens Hood XOONS
The XOONS hood for the Summarit 50mm f1.5 is in like-new condition. It has a brass construction with a black crystalline coating, showcasing excellent craftsmanship and a substantial feel that’s rare in modern industrial products.This hood is compatible not only with the Summarit but also with the Leitz Xenon 50mm. Although it may appear bulky for a 50mm hood, it surprisingly complements a smal...
-
Condition：
-
98% Like New
-
Leitz 135mm Finder SHOOC
¥15,000
*Shipping to Japan Only. For overseas customer, please contact us before order.SHOOC / 12030. A genuine Leitz 135mm viewfinder with parallax correction. Exceptional clarity, with a bright frame that appears when you look through it.This is an early version of the SHOOC, featuring a mix of lowercase lettering and parallax correction markings in meters only.There is a tiny ding on the top of the ...
-
Condition：
-
93% B
-
Leitz Lens Hood IUFOO
*Shipping to Japan Only. For overseas customer, please contact us before order.IUFOO lens hood, later as 12575N, was produced by Leitz for telephoto lenses. It is compatible with E39-thread lenses such as the Elmar 90mm, Elmarit 90mm, Tele-Elmarit 90mm, and Hektor 135mm. The hood features a double-hook locking mechanism, with a black-painted finish on the hood section and a matte chrome finish ...
-
Condition：
-
91% C
-
Exakta - Alpa Adapter Exabag
*Shipping to Japan only. For overseas customer, please contact us before order.Exabug. An Alpa-made lens mount adapter. It converts lenses with Exakta mounts to Alpa mounts.Though unmarked, this is an authentic Alpa original accessory. For It is offering the ability to explore Exakta lenses on the Alpa system.There are a few scratches on the lens mount side, but otherwise, it's clean. Tested f...
-
Condition：
-
92% B
-
Leitz Lens Hood FIKUS Nickel
Leitz FIKUS Zoom Hood for 35/50/90/135mm lenses. A36 slip-on (36mm). A rare nickel version.This unit is engraved with markings for 13.5cm, 9cm, Elmar 5cm, and Hektor 5cm. The hood section features a silver inlay Ernst Leitz Wetzlar engraving.An excellent accessory for those who use black-painted Barnack Leicas such as the DII or DIII, or nickel-finished lenses. A versatile hood that fits four d...
-
Condition：
-
93% B
-
Voigtlander 50mm Finder
A standalone viewfinder made by Cosina Voigtländer, designed for 50mm lenses. It features an easy-to-see bright frame system and is also 1:1 magnification, which is a key point.Its compact design closely resembles Leitz’s classic SBOOI viewfinder, offering excellent visibility.The combination of black paint and chrome plating gives it a classic aesthetic.There are only very slight scuffs on the...
-
Condition：
-
96% Mint
-
Voigtlander 75mm Finder
A standalone viewfinder made by Cosina Voigtländer, designed for 75mm lenses. It features an easy-to-see bright frame system and is also 1:1 magnification, which is a key point.Its compact design closely resembles Leitz’s classic SBOOI viewfinder, offering excellent visibility. The combination of black paint and chrome plating gives it a classic aesthetic.Originally made for Cosina’s Bessa seri...
-
Condition：
-
96% Mint
-
M42 - Alpa Adapter Autobag
The Auto-Bag is a lens mount adapter made by Alpa, designed to convert a wide variety of M42 mount lenses to the Alpa mount. It supports automatic aperture control.For manual aperture lenses that do not support automatic aperture control, the corresponding adapter is the Practibag.Please note: This adapter cannot be used on rangefinder-equipped Alpa bodies such as the Alpa 7 or Alpa 8.Overall, ...
-
Condition：
-
92% B
-
Leica Pistol SCNOO Chrome
SCNOO. Leica Pistol, chrome finish.Compatible with Leica DII, DIII, IIIa, and IIIb models from serial number 159000 onward. It can also be used with earlier models if the film advance shaft is modified (modification service available for a fee).Simply attaching it instantly elevates both the look and handling, making it a mood-boosting accessory!This particular piece lacks the Germany engraving...
-
Condition：
-
92% B
-
Rollei Panorama Head
¥15,000
PANORAMAKOPF – A panorama head for Rolleiflex and Rolleicord cameras. Both the tripod side and camera side feature large threads.This product is from the Rolleiflex Standard era. The black crystalline finish and beautiful nickel plating, along with the satisfying click of the head mechanism and the rigidity of the components, showcase the excellent craftsmanship that is characteristic of vintag...
-
Condition：
-
94% A
-
Rollei Mutar 1.5x (RIII)
The Rollei Mutar 1.5x is a teleconverter attachment for Rollei Flex RIII bayonet mount, designed to turn standard lenses into telephoto lenses. It is compatible with the Rollei Flex 2.8 series.When attached, it converts focal lengths like 75mm to 110mm and 80mm to 116mm (with the minimum focusing distances becoming 1.65m and 1.86m, respectively). While it doesn’t quite reach the 135mm telephoto...
-
Condition：
-
92% B
-
Walz Lens Hood for Summicron 50mm
*Shipping to Japan Only.The Summicron 50mm f2 push-on lens hood, made by the Japanese photo equipment manufacturer, Waltz. It is similar in design to the hood for the Summarit 50mm f1.5, resembling the XOONS design. With a 42mm push-on diameter, it fits most 50mm lenses with an E39 size.Although the design is similar to the XOONS, it fits both the Summicron and Summitar lenses, which makes it a...
-
Condition：
-
94% A
-
Walz Lens Hood for Summarit 50mm
*Shipping to Japan Only. For overseas customer, please contact us before order.This is a Japanese-made copy of the XOONS hood, designed for the Summarit/Xenon 50mm lens, produced by the WALTZ company. It fits 44mm screw-on threads. There is also a similar version for 42mm (E39) threads, suitable for lenses like the Summicron.When compared to the original XOONS, the texture of the finish and the...
-
Condition：
-
94% A
-
Leitz 28mm Finder SUOOQ
Hektor 28mm f6.3 Folding Viewfinder, SUOOQ, also known as the Saikoro-Finder (Dice Finder) in Japan.Finished in chrome, this compact folding viewfinder becomes extremely small when collapsed. Its design, which folds down neatly, is full of the typical Leitz craftsmanship and precision, offering a delightful mechanical charm.A stylish accessory typical of pre-war Leitz, this finder pairs perfect...
-
Condition：
-
92% C
-
Hektor 28mm f6.3 Lens Hood SOOHN
Hektor 2.8cm f6.3 Lens Hood. Leitz product code: SOOHN. The retaining screw is chrome-plated. Made by Leitz Germany. This hood is a 36mm slip-on type with the engraving 2.8 E.Leitz Wetzlar Germany. Notably, the cm is not engraved next to the 2.8.This sleek and simple trumpet-shaped design is a classic hood that enhances the appearance of your Leica and Hektor lens. Not only does it offer excell...
-
Condition：
-
91% C
-
Walz Lens Hood for Summicron 50mm
*Shipping to Japan Only.Slip-on lens hood for the Summicron 50mm f2, manufactured by the Japanese photo accessory company, Waltz. It shares a very similar design to the hood for the Summarit 50mm f1.5, model XOONS. With a 42mm slip-on fit, it is compatible with all E39-sized 50mm lenses.Although its appearance resembles the XOONS, it is designed to fit the Summicron and Summitar, which may be ...
-
Condition：
-
96% Like New
-
Leica Pistol SCNOO Chrome
SCNOO. Leica Pistol, chrome finish. Compatible with Leica DII, DIII, IIIa, and IIIb models with serial numbers from 159000 onward. It can also be used with earlier models if the film advance shaft is modified (modification service available for a fee).Simply attaching it instantly enhances the camera’s style, making it a truly iconic accessory for Barnack Leicas—both in function and aesthetics....
-
Condition：
-
96% Mint
-
なにがし レリーズ・ボタン L 真鍮シルバー
¥5,800
*Shipping to Japan Only.
-
Condition：
-
100% Brand New
-
なにがし レリーズ・ボタン S 真鍮ブラックペイント
¥6,350
*Shipping to Japan Only.
-
Condition：
-
100% Brand New
-
なにがし レリーズ・ボタン L 真鍮ブラックペイント
¥6,350
*Shipping to Japan Only.
-
Condition：
-
100% Brand New
-
Nikon Mini Finder 35mm
A 35mm mini viewfinder for Nikon rangefinder cameras, designed to mount onto the hot shoe. With its flat, compact design, this viewfinder can remain attached while still allowing the original leather case to close. Despite its small size, it offers a clear and bright viewing experience. Its stylish design was so well-regarded that other manufacturers later produced similar copies. A small yet...
-
Condition：
-
94% A
-
Nikon Sport Finder
Nippon Kogaku Sports Finder. This finder was manufactured during the Nikon S series era, from around 1953 to 1960. This particular unit is a later model, featuring an inner frame painted in a pale yellow for better visibility. When the frame is raised and viewed from the front, the angle markings are inverted. In contrast, the earlier model had a full chrome-plated finish with the angle marking...
-
Condition：
-
94% A
-
Elmar-M 50mm f2.8 Hood 12549
*Shipping to Japan only. For overseas customer, please contact us before order.A hood for the Elmar-M 50mm f2.8, reissued in 1994. Leica’s product code is 12549. It features a chrome-plated finish. With its E39 screw-in design, this hood is not limited to the Elmar; it can also be attached to a variety of lenses, including vintage Summicron models and even non-Leitz lenses. Many of our custom...
-
Condition：
-
93% B
-
Rollei Panorama Head
¥16,000
*Shipping to Japan Only. For overseas customer, please contact us before order.In German, it's called Panoramakopf and in English, it's known as the Panorama Head. This is a panorama head designed for Rolleiflex and Rolleicord cameras. On the tripod side, it features a large screw, while on the camera side, there is a small screw with a large screw adapter, allowing it to accommodate both smal...
-
Condition：
-
95% Mint
-
Exakta - Alpa Adapter Exabag
*Shipping to Japan Only. For overseas customer, please contact us before order.Exabag. An Alpa-made lens mount adapter. It converts lenses with Exakta mounts to Alpa mounts.Although unbranded, it is a genuine Alpa product. For Alpa users, this accessory would be irresistible.The Alpa body has been tested with Exakta lenses for compatibility.
-
Condition：
-
92% B
-
M42 - Alpa Adapter Practibag
*Shipping to Japan Only. For overseas customer, please contact us before order.The adapter shows minimal signs of use and is in excellent condition. It has been tested with an Alpa body and M42 lenses.The price includes domestic shipping.
-
Condition：
-
93% B
-
Leitz Lens Hood FLQOO
The hood for the Elmar 35mm f3.5, FLQOO. A36 push-on type. The retaining screw is chrome-plated. This particular model features white-painted lettering in the engraving. The appearance is similar to the FISON and FLQOO hoods, but the diameter and length differ.With its simple design, this hood enhances the appearance of your lenses. True to Leitz’s craftsmanship, it’s a slightly rare hood.This ...
-
Condition：
-
92% B
-
Rolleifix
*Shipping to Japan Only. For overseas customer, please contact us before order.Rollei Fix. A quick release for the Rolleiflex twin-lens reflex camera. This sturdy quick release allows you to securely and swiftly attach the heavy Rolleiflex to a tripod. The quality and precision of the build are excellent, making it a well-crafted item. It also minimizes stress on your valuable Rolleiflex camera...
-
Condition：
-
93% AB
-
Zeiss Lens Hood 40.5mm for Contax
*Shipping to Japan Only.A lens hood for Contax cameras, manufactured by Zeiss Ikon Stuttgart. Product code: 1104. 40.5mm screw-in. Both the hood and the base are made of bakelite and are molded as a single piece.This product dates back to the era of the Contax IIa and IIIa models and is compatible with the 50mm Sonnar and Tessar lenses.Around the same time, Zeiss Ikon East Germany also released...
-
Condition：
-
92% B
-
Leitz Tripod Head KGOON Nickel
The early version of the Leitz medium-sized ball head, KGOON. Only the part supporting the ball is chrome-plated, while the rest is finished with nickel plating. Both the male and female threads are large. The medium-sized ball head was first introduced around 1936, but Leitz's nickel-plated ball heads are extremely rare, with the small-sized FIAKU being the only one occasionally found in nicke...
-
Condition：
-
92% B
-
Visoflex II
*Shipping to Japan Only. For overseas customer, please contact us before order.Visoflex II with original box, designed for Leica M cameras. This set includes the Visoflex II body (OTDYM/16455) and the prism viewfinder (OTXBO/16460). The set code is OCLOM/16456.The Visoflex II introduced significant improvements over the Visoflex I, such as the adoption of a pentaprism, allowing for an upright i...
-
Condition：
-
93% B
-
Leica L/M Adapter 50mm
*Shipping to Japan Only. For overseas customer, please contact us before order.14097. Leica genuine LM adapter for 50mm lens. The logo features digital lettering and a cut-out design, indicating a more recent product.When mounted on an M-type Leica, it displays the 50mm and 75mm finder frames. A reliable, genuine product.In like-new condition. No signs of use, it is very clean.The rangefinder c...
-
Condition：
-
96% Mint
-
Hasselblad Exposure Meter Knob
*Shipping to Japan Only. For overseas customer, please contact us before order.54011 / TIMCC. Hasselblad genuine knob meter. This is an exposure meter-equipped wind-up knob, designed to replace the wind-up knob on the 500C, 500 C/M, and 503CX models. It was supplied until 1991.Please note that it cannot be used with the 503CXi, 501C, 501CM, or 503CW models.It incorporates a Gossen-made selenium...
-
Condition：
-
95% Mint
-
Rolleinar 2 (RIII)
*Shipping to Japan Only. For overseas customer, please contact us before order.The Rolleinar 2, designed for Bay III (Bay3) bayonet mounts, is a close-up lens for cameras such as the Rolleiflex 2.8F. When attached, it allows for close-up photography with a focusing range of 30cm to 50cm.Both the exterior and glass show minimal signs of use and are in excellent condition. The leather case is als...
-
Condition：
-
94% A
-
Leitz Left Hand Shutter Release
Left-Handed Shutter Release for Barnack Leica.A custom-made shutter release attachment produced in the 1930s for left-handed users. This accessory was not featured in product catalogs and appears to lack an official code number.Cameras compatible with both right- and left-handed shutter releases are rare, with the Exakta Real being one of the few examples. Similarly, cameras with left-handed sh...
-
Condition：
-
94% A
-
Leitz Lens Hood OLLUX
¥195,000
OLLUX / 12522H. Specially designed hood for 1st model of Summilux 35mm f1.4 OLLUX engrave. Eerly type with 2 arrows. Version 2. Very stylish and elaborate design. Fitting tested on lens.Very used condition. Good fitting on lens. No backlash. No warp. Very good atmosphere with used body and lens.
-
Condition：
-
90% C
-
Rolleinar 1 (RIII)
Close-up lens for Rolleiflex 2.8F and similar models, RIII, Bayonet III. It attaches to the inner bayonet of the RIII. When attached, it allows for close-up shooting from 47 to 100 cm. *Shipping to Japan Only. For overseas customer, please contact us before order.Clean both filter frame and glass. Case condition is also good.
-
Condition：
-
94% A
-
Leitz 28mm Finder SLOOZ Black
The original metal 28mm finder from Leitz, the SLOOZ, later designated as Code 12007. This particular item features a black chrome finish, making it an excellent companion for lenses like the Elmarit 28mm and the red-scale Summaron. Not only does it pair perfectly with black chrome bodies, but it also complements black paint bodies beautifully.There are only minimal marks on the shoe from moun...
-
Condition：
-
96% Mint
-
Hektor 28mm f6.3 Lens Hood SOOHN New York
SOOHN Hood for the Hektor 28mm Lens, made by Leitz New York. The retaining screw is chrome, and the construction differs slightly from the original Wetzlar-made version. While the interior of the hood is matte-coated, it lacks the fine ribbed texture of the German version, instead featuring a somewhat rounded finish that gives it a heavier, more handcrafted feel.Leitz New York versions of the S...
-
Condition：
-
93% B
-
Leica A Set Case ETRIN
*Shipping to Japan Only. For overseas customer, please contact us before order.Leather Set Case for Leica Model A.Designed to hold a Leica Model A body, FODIS rangefinder, and two film magazines.Leitz product code: ETRIN. Likely manufactured in the late 1920s to early 1930s. Overall, it is in remarkably clean condition.The ETRIN case has been available since the early days of the Leica A-type, ...
-
Condition：
-
93% B
-
Nikon S3 Case
*Shipping to Japan Only. For overseas customer, please contact us before order.Leather case for Nikon S3. Brown. The tripod screw is a small screw type.Crafted from high-quality leather, it remains supple to this day.There are minor scratches and slight discoloration on the strap area, but the leather is in excellent condition, making it a worthy addition to any collection.
-
Condition：
-
95% Mint
-
Leitz Self Timer APDOO
*Shipping to Japan Only. For overseas customer, please contact us before order.Self-timer for Barnack Leica. Product code is APDOO, with the later code being 14003. Available in black/chrome finish. Manufactured from 1938 to around 1965. This particular unit is a late post-war model with a chrome dial and black-painted markings.To use, remove the shutter release button from the Leica, screw in ...
-
Condition：
-
93% B
- Choosing a selection results in a full page refresh.
- Opens in a new window.
