Skip to content
ACCESSORY
-
Rolleiflex Rubber Lens Hood (RIII)
¥9,000
Rolleiflex rubber hood for Bay 3, Rolleiflex 2.8F etc. Rubber is in good condition without wear or tear. *Shipping to Japan only.
-
Condition：
-
93% B
-
Leitz Lens Hood FISON
FISON / 12510. A36. Manufactured since 1925. Long seller model. Chrome plated. Early model. Slight signs of use. Good condition. *Shipping to Japan only
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH
FOOKH. A36, 36mm slip-on hood. For Summaron 35mm f3.5, Elmar 35mm f3.5 Leica screw mount. No sign of use. Like new condition. With an original box.
-
Condition：
-
97% Like New
-
Leitz Lens hood ITDOO
ITDOO. E39. Single hook. For Summicron 35mm, 50mm and Summaron 35mm. Very beautiful condition with like-new atmosphere. Good for collection.
No signs of use. Almost new condition. Beautifully matte black painted surface.
-
Condition：
-
98% Like New
-
Schmidt Lens Hood for Summarit 50mm f1.5
Made by ACTINA which is the original brand of Schmidt, the import agency of Leitz. For Summarit 50mm. Useable it on E41 filter. It is not geniune Leica , yet good looking with Summarit.
Slight scuffs are seen, yet still in good shape without dents. Rare item.
-
Condition：
-
93% B
-
Leitz Lens Hood XOOIM
XOOIM / 12521G. Fits on Summilux 50mm f1.4 1st and 2nd generations. With hood cap.
Slight scuffs on the edge of the hood part. Other parts are very clean!
-
Condition：
-
94% A
-
Leitz Lens Hood VALOO
VALOO / 16620. Released in 1949. Combination lens hood and diaphragm adjusting ring for Elmar 50mm. The aperture operation part has built-in click stops. A36 size. Cap can be fitted to the hood.
Used condition. Good workig condition. Good for use.
-
Condition：
-
93% B
-
Leitz Lens Hood SOOMP for Summar 50/2
SOOMP. Genuine lens hood for Summar 50mm f2. A36 size. Stopper screw in Chrome plating. No signs of use. Like new condition.
Like new condition. Paint keeps matte surface. Good for collection or display. Comes with used box.
-
Condition：
-
96% Mint
-
Leitz Lens Hood IROOA
IROOA / 12571J. Double hook. Standard hood for Summicron 35mm, 50mm and etc. Simple & Stylish design. Comes with box.
Faint signs of use close to inner part around hook. Very clean condition.
-
Condition：
-
95% Mint
-
Leitz Lens Hood 12504
12504. Genuine hood for Summilux 35mm f1.4 2nd and Summicron 35mm f2 etc. Series 7 filter to be inserted between upper part and lower part. No sign of use, like new condition.
-
Condition：
-
98% Like New
-
Leitz Lens Hood FOOKH
FOOKH. A36, 36mm slip-on hood. For Summaron 35mm f3.5, Elmar 35mm f3.5 Leica screw mount. No sign of use. Like new condition. With an original box.
-
Condition：
-
95% Mint
-
Leitz Lens Hood FISON
FISON / 12510. Manufactured since 1925. Long seller model. Chrome platted. Comes with an original box. Good for collection.
Fitting tested. Faint signs of use. Clean appearance. No dents. No distortion. Black paint inside remains in good condition.
-
Condition：
-
95% Mint
-
Leitz Lens Hood XOONS for Summarit 50mm
Lens hood for Summarit 50mm f1.5 XOONS / 12520K. Also usable with Leitz Xenon 50mm f2. No signs of use. Like new condition. Comes with original box indicating Leitz code 12520K.
-
Condition：
-
96% Mint
-
Leitz Lens Hood VALAU Nickel
Early type of aperture ring for Elmar 50mm f3.5 which was designed for enlarger, yet it is also used for shooting. Nice design! Rare accessory. Slight signs of use but still in clean condition.
-
Condition：
-
93% B
-
Kodak Lens Hood Series VII for Ektar 80mm
Kodak genuine Aluminium Lens Hood. Series 7. Fits on Ektar, Tessar 80mm for Hasselblad 1000F. Made in USA. Serie VII filter is useable.
Dead stock. No signs of use, Like New. The box is damaged.
-
Condition：
-
96% Mint
-
Zeiss Lens Hood 40.5mm for Contax S
Made by Pentacon, East Germany. For Pentacon SLR, Contax S series. Product cord is 20601. 40.5mm screw in type. Hood part is Bakelite and base part is Chrome prating on brass. Useable for Contax Sonnar also.
Some scuffs found, yet still clean and good condition.
-
Condition：
-
93% B
-
Leitz Lens Hood 12501
12501. For Super Angulon 21mm f3.4, Elmarit 28mm f2.8. No sign of use.
-
Condition：
-
96% Mint
-
Nikkor 35mm f2.5 (L) Lens Hood
For W-Nikkor 35mm f2.5 with Leica screw mount. Different shape from the hood for S mount. The hood for L mount is getting very difficult to find.
Some used marks on the plastic part, yet still clean and in good condition.
-
Condition：
-
93% B
-
Actina Lens Hood for Elmar 50mm
Lens hood for collapsible type Elmar. Made in Japan. Looks like ITOOY copy, yet it is 36mm diameter. With signs of use. *RARE*
-
Condition：
-
92% B
-
Leitz Lens Hood FOOKH
FOOKH. A36, 36mm slip-on hood. For Summaron 35mm f3.5, Elmar 35mm f3.5 Leica screw mount. No sign of use. Like new condition. With an original box.
-
Condition：
-
98% Like New
-
Leitz Lens Hood SOOFM
Folding type lens hood for Summitar and Summicron 50mm. Double name version with engraving both lens name. Slight signs of use, yet still in good condition. Box separated and repaired.
-
Condition：
-
93% B
-
Voigtlander Lens Hood 32mm
32mm slip-on hood for Vito series and etc. Released after Voigtlander merged with Zeiss. Items number of Zeiss 20.5710 on the box. Old Voigtlander item number 310/32 is engraved on the hood. New old stock.
-
Condition：
-
99% Like New
-
Leitz Lens Hood 12514 for Macro-Elmarit-R 60mm f2.8
Lens hood for Marco-Elmarit-R 60mm f2.8 and PA-Curtagon 35mm f4. No signs of use on hood. New old stock. Some writing on box with felt-tip pen.
-
Condition：
-
98% Like New
-
Leitz Lens Hood 12501
12501. For Super Angulon 21mm f3.4, Elmarit 28mm f2.8. Slight sign of use. Very good conditioned one.
-
Condition：
-
93% B
-
Foca Rubber Hood
Rubber hood for FOCA cameras, made by O.P.L., France. For 50mm standard lens such as Oplar, Oplex, Oplarex etc. Comes with box. Good condition. *Shipping to Japan only. For oversea customers, please contact us before order.
-
Condition：
-
93% B
-
Leitz Lens Hood 12575
IUFOO / 12575N. For E39, Elmar, Elmarit, Tele-Elmarit 90mm, Hektor 135mm and etc. Double hook type. Like new condition without signs of use. Comes with box.
-
Condition：
-
98% Like New
-
Leitz Lens Hood 12571J
IROOA/12575J. Double hook. Standard hood for Summicron 35mm, 50mm and etc. With engraving ERNST LEITZ WETZLAR GERMANY. Some paint peels are seen on the edge and slight scuffs found, yet still in good condition for use.
-
Condition：
-
93% B
-
Leica Lens Hood 12586
For Summilux 50mm f1.4 Early and 2nd models, E43 Summilux. Successor hood of XOOIM. With LEICA engraving. Fitting on lens was checked. Good for use!
-
Condition：
-
96% Mint
-
Leitz Lens Hood 12521G
12521G. Lens hood for Summilux 50mm f1.4 chrome 1st and 2nd generation. Slight paint peels in front edge of hood. Faint used marks on chrome plate. No dents. Good for use.
-
Condition：
-
93% B
-
Cooke & Perkins Hood for Elmar 50/3.5
Rare lens hood from Cooke&Perkins, England. Fits with screw stopper. Move the apature ring with this hood. Light weight, made of aluminum.
No dents. Very good condition. Good for collection.
-
Condition：
-
94% A
-
Hasselblad Lens Hood Shu0004 for Ektar 80mm
Lens hood for Hasselblad 1600F / 1000F. For Kodak Ektar 80mm f2.8. Screw-in type and able to set filter inside. Made by solid aluminium. Shipping to Japan only.
-
Condition：
-
93% B
-
Walz Lens Hood for Summarit
Copy hood for Summarit 50mm f1.5, produced by Walz. Copy type of XOONS. Lighter thant Leitz original one. Usable with Xenon, too.
-
Condition：
-
92% B
-
Rolleiflex Standard Lens Hood
Original lens hood for Rolleiflex Standard. Good condition for its age!
-
Condition：
-
93% B
-
Rectaflex Lens Hood ASVOP
Rectaflex hood for standard lens. For 50mm lens of Angenieux, Som Berthiot Flor, Xenon, Rectar, Etar, Esar, Heligon, Beta, Akton and etc. Released in 1952. 47mm diameter, Slip-on type.
Hood and mount part can be separated and filter could be inserted. Front part is changeable for wide angle lens and telephoto lens.
-
Condition：
-
93% B
-
Waltz Rolleiflex Lens Hood Set (RII)
Lens hood for Rolleiflex 3.5F. Made by Waltz. Set with Yellow, Green, Orange and Red color filters. Bayonet II (Bay 2). Very similar to genuine Rollei hood. Fitting tested with our Rolleiflex 3.5F.
-
Condition：
-
94% A
-
Leitz Lens Hood FISON Black + VOOLA
FISON and VOOLA. Lens hood for Elmar 50mm with aperture ring. A36. Nickel plated stopper screw. Exported type with Germany engrave. Rare item.
Used and good condition.
-
Condition：
-
92% B
-
Leitz Lens hood FLQOO
FLQOO. For Elmar 35mm f3.5. A36 slip-on type. Stopper screw is in chrome. Late type with white paint letters.
Faint paint off found close to Elmar 3.5cm letters, yet still very clean condition rarely seen.
-
Condition：
-
93% B
-
Leitz Lens Hood FISON New York Leitz
FISON produced by N.Y. Leitz and with its logo. For Elmar 50mm. Chrome plating on brass. Little rare item!
Some scuffs are seen on the chrome plating, yet still in good shape without dent or warp. Fitting tested on Elmar 50mm.
-
Condition：
-
92% B
-
Leica Lens Hood 12549
12549. For Elmar 50mm f2.8, revival in 1994. E39 screw-in type and usable for other lens, too. Like new condition. No used marks and very clean! *Shipping to Japan only. For oversea customers, please contact us before order.
-
Condition：
-
96% Mint
-
Leitz Lens Hood IWKOO
IWKOO/12502N. For Super Angulon 21mm f4. With IWKOO engrave. Very clean without any marks.
-
Condition：
-
96% Mint
-
Leitz Lens Hood SOOPD for Summitar 50mm
@@@Collapsible type lens hood for Summitar 50mm lens. Some scuffs, yet still in good condition for use!
-
Condition：
-
93% B
-
Leitz Lens Hood FIKUS
Black/Chrome. Zoom hood for 50/90/135mm A36. Also usable for Elmar 35mm f3.5 when it is totally overlapped. Very clean without sign of use. Comes with original box (repaired).
-
Condition：
-
94% A
-
Rolleiflex Lens Hood (RII)
Rollei genuine hood for Rolleiflex 3.5F. Some slight scuffs on the mount, yet the other parts are very clean without major marks. The case and box are also in good shape.
-
Condition：
-
94% A
-
Rectaflex Lens Hood ASRAP
Original Lens Hood for Rectaflex Lens, Angenieux 35mm f2.5 Type R1 Retrofocus. It's fittable to the same type lens of LTM, M42, Exacta mount. Very Cool Design. Lock screw connection to lens. Rare.
-
Condition：
-
95% Mint
-
Leica Lens Hood 12586
For Summilux 50mm f1.4 Early and 2nd models, E43 Summilux. Successor hood of XOOIM. With LEICA engraving. A dent found on the side of the hood. Fitting on lens was checked. Good for use!
-
Condition：
-
91% C
-
Actina Lens Hood for Summicron 50mm
Made by Schmidt with brand name of Actina. For E39 Summicron, Elmar. Useable for 50mm lens which fits ITDOO and IROOA. It can be fit upside down also. Slight scuffs are seen, yet still very clean without any warp. *Rare Item.
-
Condition：
-
93% B
-
Leitz Lens Hood FISON Early
For Elmar 50mm. Black Paint on Brass. Early type of FISON without screw. For smoothness of attach and remove, it seems that a slit was spreaded. Pretty good condition as its age. Rare item.
-
Condition：
-
92% B
-
Leitz Lens Hood FISON Early
For Elmar 50mm. Black paint on brass. Early type without stopper screw. Square cover removed from the 1st model of FISON. Leitz hood design kept changing at early era in very short period. It is a great fun to study history of Leitz. Rare Item
-
Condition：
-
92% B
-
Rolleilux
Lens hood with exposure meter for Baby Rollei 4x4 and Rolleiflex 6x6. Collapsible. Slight used marks found. Good conditioned. Exposure meter working. Good for use.
-
Condition：
-
93% B
-
Hasselblad Lens Hood Shu0011 for SWC
¥17,000
Shu0011. Hood for Biogon 38mm on Hasselblad SWC, SWC/M. Screw-in type and able to set geniune filter or Serie 8 filter inside. Excellent design for necessary strength, although with Lightweight and thin design. Brand New.Made by high-quality aluminium. The exterior is black anodized, and the interior is matte black painted. Maximum diameter is 12cm. Pretty large, yet SWC users would love the d...
-
Condition：
-
100% Brand New
-
Hasselblad Lens Hood Shu0012 for Distagon 50mm / 60mm
¥17,000
Hood for Distagon C 50mm and 60mm (Hasselblad). Screw-in type and able to set filter inside. Light and thin design but strong enough. New condition.
-
Condition：
-
100% Brand New
-
Rollei Lens Hood (RII)
Genuine lens hood for Rolleiflex 3.5F and etc. No used marks and very clean!
-
Condition：
-
94% A
-
Leitz Lens Hood FISON Black
Early FISON without screw. For Elmar 50mm f3.5. With Leitz Wetzlar engrave. Paint peels and slight distortion. Comes with very rare frame purse. Rare Item.
-
Condition：
-
92% B
-
Robot Lens Hood
Lens hood for Robot. Clip-on type. Fits on the lens no filter screw type. Very clean appearance!
-
Condition：
-
94% A
-
Leica Lens Hood 12544 for Noctilux E60
Leica 12544 lens hood for Noctilux 50/1.0 E60 with serial number starting from 3220709. Snap-on type. Some used marks are seen. Good for use!
-
Condition：
-
92% B
-
Leitz Lens Hood VALAU Nickel
Early type of aperture ring for Elmar 50mm f3.5 which was used for enlarger, yet it is also used for shooting. Nice design! Rare accessory.
-
Condition：
-
93% B
-
Leica Lens Hood 12538
*Never Used* Leica original hood for Summicron 50mm f2. Successor model of 12585. Hood is built-in from 1994 and this is the last hood for Summicron.
-
Condition：
-
99% Like New
-
Rollei Lens Hood (RIII)
For RIII bayonet of Rolleiflex 2.8F and etc. With old Rollei engraving. Used marks on the inner paint, yet other parts are very clean. Comes with genuine case and box.
-
Condition：
-
94% A
-
Rolleiflex Rubber Lens Hood (RIII)
¥9,000
Rolleiflex rubber hood for Bay 3, Rolleiflex 2.8F etc. Rubber is in good condition. No cracks. *Ship to Japan only. For oversea customers, please contact us before purchasing.
-
Condition：
-
92% B
-
Leitz Lens Hood FISON Black
Hood for Elmar 50mm f3.5. Early type without stopper screw. No Leitz Wetzlar name on it, only Germany engraved. Not much paint peels and the Black Paint is still beautiful condition. RARE Items.
-
Condition：
-
93% B
- Choosing a selection results in a full page refresh.
- Opens in a new window.
